News for hackers. Stuff that matters.
Re:How to 3D-print one of the strongest stainless steels by TOMDM on Monday September 26, 2022 @03:29PM (#32987210)
Are there any pictures of a finished part?

I'm assuming there would be features that need to be cleaned up after a print, but this looks incredible.

I wonder what the cost savings are like vs a 6dof CNC mill for parts that can be made that way.

Re:How to 3D-print one of the strongest stainless steels by monkpit on Monday September 26, 2022 @03:31PM (#32987235)
Not only that, but if you can print finished parts you can engineer parts that cannot be physically machined.
Re:How to 3D-print one of the strongest stainless steels by TOMDM on Monday September 26, 2022 @03:32PM (#32987250)
Yeah, the ability to rapid prototype parts with occluded cavities that can't be machined by a CNC makes this a compelling capability all on its own.
Re:How to 3D-print one of the strongest stainless steels by dekhn on Monday September 26, 2022 @04:24PM (#32987873)
Example: https://www.thingiverse.com/thing:1068443 if not impossible, would be very difficult to machine, but is straightforward for a printer.
Re:How to 3D-print one of the strongest stainless steels by etrautmann on Monday September 26, 2022 @06:59PM (#32989721)
Great point, though I think this isn’t a great example - it should be straightforward to machine that part with a 5 axis cnc since all of the suns rays pass straight through and an end mill could approach from each of those angles as well.
Re:How to 3D-print one of the strongest stainless steels by ezekg on Monday September 26, 2022 @08:03PM (#32990226)
Re:How to 3D-print one of the strongest stainless steels by jjk166 on Tuesday September 27, 2022 @12:42PM (#32997771)
Balls in a cage are actually common CNC machined art pieces.
Re:How to 3D-print one of the strongest stainless steels by dekhn on Wednesday September 28, 2022 @02:22PM (#33011365)
Re:How to 3D-print one of the strongest stainless steels by amelius on Monday September 26, 2022 @06:54PM (#32989684)
I wonder if you can make screw threads and how fine using this technique.
Re:How to 3D-print one of the strongest stainless steels by Intermernet on Tuesday September 27, 2022 @05:26AM (#32993174)
You can, but they usually require re-tapping / re-dieing. This is usually easier and less wasteful (from a material point of view) than tapping / dieing a drilled or lathed part, but involves careful calibration in order to end up with a good finish. If you don't really care about "machinist fit" threads you can usually get away with 3d printed threads, but they'll bind, or have lots of backlash, or both.
Re:How to 3D-print one of the strongest stainless steels by rsfern on Monday September 26, 2022 @08:50PM (#32990488)
I don’t think there are full part builds related to this study. this group does these cool single track experiments where you can follow along with synchrotron x-rays and get really good structural data through the whole solidification process. So it’s more basic materials science than applied at this point.

Someone else posted a link to the paper

Re:How to 3D-print one of the strongest stainless steels by SV_BubbleTime on Monday September 26, 2022 @03:44PM (#32987400)
>6dof CNC mill

6-axis, dof is the wrong term here.

Re:How to 3D-print one of the strongest stainless steels by defterGoose on Monday September 26, 2022 @04:02PM (#32987603)
5-axis. No one uses Stanford arms for milling strong materials. The sixth axis would be redundant with the spindle rotation anyway.
Re:How to 3D-print one of the strongest stainless steels by SV_BubbleTime on Monday September 26, 2022 @10:30PM (#32991006)
I was correcting one thing at a time. We use a 6-axis laser at my work, I’m only hobbiest machinist level at best.
Re:How to 3D-print one of the strongest stainless steels by TOMDM on Tuesday September 27, 2022 @12:11AM (#32991487)
Either way I appreciate the corrections from both of you!