Sadly this advice is a little bit out of date, as the SKX has been out of production now for a few years and the price on uses examples has risen above what one is worth (except to collectors).
The newer advice is to grab a Seiko 5*. There's a million different choices, and all the current ones come with the 4R35 or 4R36 movement, which are better than the 7S26 which was in the SKX divers.
* https://www.seikowatches.com/us-en/products/5sports/lineup
There are a some brands that will service every watch they've ever made, fabricating new parts as needed. Few of us can afford one of those.
I asked them how this works, and they said anything younger than 80 years Omega just sends them parts without any issue, anything older they have to send back to Switzerland for service, and yes, then Omega might have to manufacture the parts required on the spot - and yes, that then turns really expensive.
I was lucky enough to inherit my grandfather's pre-COMEX 5513 in very good condition - one or two tiny specks on the dial and a light scratch on the case. The appraiser gave me the warning that I should never send it to a Rolex repair center for servicing under any circumstance. If I did, I'd likely end up having the original acrylic bubble being replaced with crystal, the case polished high heaven, new tritium applied, and it'd probably be worth $15k less.
Collectors want a watch that shows signs of life; they value a nice patina. Many watch manufacturers service things to "modern spec" and try to make a watch look new. For a watch that old, I'd strongly suggest you find an independent watchmaker or two and get them to give you an estimate before you do anything.
Yeah, but I don't. I don't have this watch as an investment - hopefully I'll use it for another 50 years and then someone else can use it again for 50 more years. In fact in addition to the service I paid £300 to have the dial replaced with a brand "new"(old stock) identical dial, because mine was showing very minor signs of corrosion. If a collector somewhere has an issue with that.....tough? Also I have no idea how anyone could ever even tell the dial was replaced, the new one is original Omega, just......flawless.
>> If I did, I'd likely end up having the original acrylic bubble being replaced with crystal, the case polished high heaven, new tritium applied, and it'd probably be worth $15k less.
That sounds perfect, if it were my watch I'd absolutely do that. Who cares how much it's worth at the end? If it's your grandfather's watch, then you probably won't ever sell it, will you?
Either way, I understand this is a personal choice.
>>for a watch that old, I'd strongly suggest you find an independent watchmaker or two and get them to give you an estimate before you do anything.
I did, both of them went "oh it's an omega, it's going to be about £400 for a full service mate" - so servicing it with Omega wasn't that much more expensive and it was a much better shout in my book, I know that whatever parts they replaced are original and brand new.
edit: just to add to the above - sorry, I realized I came across as very defensive. Yes of course your advice applies 100% if someone cares about maintaining the value of a vintage watch. Identical advice applies to maintaining vintage cars as well. But if you buy a vintage watch like me, to use it as....a watch....then just keep that in mind too.
The two things I wanted to flag were
1) watches can have surprising value fluctuations, so they're worth being appraised professionally: just because you have "a model X from company Y dating back to Z" doesn't mean you'll get the valuation right if you try. If Papa were a desk diver at COMEX instead of Arthur Andersen I'd have likely ended up with a 5514 instead, and my six figure watch would be in a safe somewhere, not on my wrist.
2) many companies, when repairing, will not hesitate to add modern components. Rolex is apparently notorious for this, but others do it as well. In the opinion of Rolex, a watch is a watch: your GMT-Master with a Bakelite bezel is no different from a GMT-Master from 2022, it's just out of spec and needs a refresh.
The combination of this has lead to horror stories where people send their watch in for what they expect to be a fairly routine service (cleaning, oiling, etc.) and end up with an entirely different watch.
As others have noted, if you own a well-known brand like a Seiko you can easily purchase an entirely new movement for $50-$75 and this should take a watchmaker no more than one hour of labor or you can DIY. (Many non-Seiko brands use NH35/36 movements, which are made by Seiko)
Still, though - keep in mind that entire Seiko movement can be bought for like $50-75. And many of their most common movements are interchangeable. For example, an older 7S26 can be replaced with a new NH36 that sells for about $50. https://chronometercheck.com/seiko-7s26-movement/
It's not entirely unfeasible to imagine buying a spare movement or three if you were, say, planning on doing sort of a heirloom thing and wanted to ensure a supply of parts N decades into the future.
NH35 can be serviced, but makes more sense an assembled replacement part. The same argument can probably made for the entire watch. The appeal of using one watch for 30 years is more in romantic fantasy than practicality.
That said, a lot of in-house movements are little more than tweaks and high end finishing applied to existing commodity movements.
The only thing you need to be mindful of with Eco-Drives is that you can't let it lose all charge. It can keep functioning in complete darkness for around 6 months, according to the specs, but if you do this enough times the battery will lose the ability to hold charge and will need to be replaced, and there are plenty of reports to this effect. If you're not planning on wearing it, just leave it somewhere that it can get natural light, instead of a drawer, and you should be good.
While mechanical watches are undoubtedly cool and elegant, they're not perfect timekeepers, and when they do need maintenance it's not something trivial which you can perform yourself. For my day-to-day watch I'll take an accurate quartz movement with virtually zero maintenance any day. In other words an Eco-Drive, or something similar.
It usually is this one in almost all their models:
https://www.amazon.co.uk/dp/B0080GQBTU/ref=cm_sw_r_awdo_XX5J...
I do not know whether this also applies to Eco-Drive.
That said, simply adjusting the tick rate to regulate timekeeping is very easy and if you've got steady hands and a sharp eye then you can do it yourself with a wooden toothpick, assuming you've got a tool to remove the watch back. Any shop (offering repair facilities) could do it as well in a matter of minutes.
Take it to a watchmaker, a fix like this would be pretty straightforward.
If a part does fail, it's usually the old blue steel mainsprings.
They can be replaced with modern White-Alloy springs. (That is just a brand name.)
Watches are my thing. I don't know why I like them so much, but do.
Servicing does take awhile to learn though. That whole 10,000 hrs probally. Servicing a watch does not take that long to learn. I'm talking about making parts with a Jeweler's lathe. And getting to the point where you know those parts well enough to visualize exactly what's wrong with a timepiece by looking at it.
If you did learn to clean/oil your mechanical watch, it's something that will be passed down to loved ones.
Oh yea, Service a mechanical watch when it stops keeping good time. That is unless you take it in the water.
I know a watchmaker who told his father he needed to Service his gifted wristwatch. His father got it 30 years ago as a present, and just wore it daily. The watchmaker was expecting dried up oil, but to his astonishment, the oil was still there. It was hermetically sealed. Oils do breakdown, but he couldn't find any damage to parts using a 40x stereoscope.
I like a watch that gets out of the way - it just works. I've got a Citizen watch a little like this: https://www.citizenwatch.co.uk/stiletto-ar1130-81a.html
It's a quartz watch, powered by solar power through the face. It has 'just worked' for as long as I've had it. From an accuracy point of view, it loses negligible amounts over the several month interval between me being forced to adjust it anyway (daylight savings, international travel).
I usually set my watch a few minutes fast on purpose. I just use it to get an approximation of the time: "oh, it's nearly 5"
When I need the exact time I look at my phone, and naturally that's where my calendar reminders and such live as well. So I'm not missing any appointments if my watch is off, and if I did rely on my watch I'd be a few minutes early.
The two work well in tandem for me.
Of course, I also know lots of watch owners who prioritize accuracy from their wristwatches. If I was one of those people, I really couldn't imagine wanting to deal with a mechanical watch. They are wonderful, wonderful little machines and it's a miracle they're as accurate as they are... but, they are not as accurate as a $10 digital watch.
Has kept brilliant time, maybe a minute a month, and taught me that my watch being accurate to the second was something that, for me, just didn't matter. I started working around pulsed high voltage last year (100kV+) and now it loses a couple minutes a week.
Checks out. Tungsten Carbide and Corundum (sapphire watch crystals, the hardest watch crystal in use) have the same Mohs hardness of 9 and will scratch each other.
And I'd guess that a $300 watch probably doesn't use Corundum but rather mineral glass.
Orient has a few automatic models (Kamasu, etc) that can be had for under $300 with sapphire.
There are antimagnetic watches. Or you can use a cheap watch demagnetizer.
Are these two things somehow related to one another?
Mechanical watches are still indeed cool though. :)
It still blows my mind that you can take the SKX scuba diving, especially when you factor in the price.
This may sound cynical but as I get older and see the world becoming more and more digital and connected, I find myself appreciating analog, mechanical things like watches and old cars more and more.
People all over the world pass down their Rolexes and Omegas, still ticking, to their children and even grandchildren. Patek Philippe is well known for their slogan, "You never actually own a Patek Philippe. You merely look after it for the next generation," showing confidence in the longevity of their watches.
Of course those are very expensive brands, but I think part of what makes expensive watches last longer is that their owners take good care of them. Few people bother to get their SKX checked up on a regular schedule, on the other hand, because they're so cheap and easily replaceable by first-world standards.
On a side note, I have read about 40 year old Seikos being worn daily without service but that sure feels outside of the norm.
I also have a replacement 7s26C which worked flawlessly [-5,+5] s/d out of the box and a year so far, and another watch with NH35 which still holds [-5,+5] s/d after seven years of daily use.
There are stories of SKX:s which hold good time after 20 years.
There are much cheaper watches than SKX (at their current prices) that will withstand the depth, see "Beyond on the press" pressure chamber tests, for example https://www.youtube.com/watch?v=Ti-GdfGbj4Y
If your watch is a sizable investment then maybe you care about maintenance more, but otherwise I wouldn't worry that it's going to stop working in short order.
Very unlikely. You do hear the occasional story of a mechanical watch running fine for several decades without requiring any servicing, but there's a lot of survivorship bias at play there. It's extremely unlikely to go ~8 decades without needing servicing. Keep in mind there are lubricants at various places in the movement that are essential to proper operation that evaporate/denature over time.
This suggests it's completely out of spec, and maybe beyond saving. However, regulating functioning Seiko movements is certainly within reach for enthusiasts using a timegrapher device, or software with a microphone. Persistently adjusting over a few days, it should be able to get within -10,+10 seconds per day.
The timegrapher will also reveal the condition of the movement and whether further work is worthwhile. Servicing these movements is likely more expensive than replacing them.
I've adjusted a couple of my watches over the course of a week or two by making small adjustments, noting the time, wearing it for a day, and then noting how much the time had changed versus a "known good" time. It's a pain but doable.
There are mobile apps that use the phone's microphone to measure the watch's "ticks" and graph them for you. They aren't anywhere near as accurate as a "real" timegrapher but they'll get you close enough.
At one point I had about a dozen mechanical watches. These days I have three, and only one that I wear almost exclusively. It's a Maratac Mid-Pilot, which uses a Miyota 8245 movement. I've used the "adjust and check later" method to adjust it, and it loses about 10s per week - well within the acceptable range.
The other two that I've kept are a Seagull 1963, which I wear as a "dress watch", and a Vostok Retro 1934, which I sometimes wear when I want a change of pace. It has a white face and I have a variety of brightly-colored straps for it.
One day I'll step up and buy a Hamilton, but I'm still savoring the serotonin from looking at them and anticipating :).
This is just an app now. All a timegrapher is is a microphone and software, and, well, your phone has all that. This is the app I use; I highly recommend it: https://play.google.com/store/apps/details?id=com.watchaccur...
It's a mechanical device which stores energy in a spring barrel, and consumes it through a set of gears to produce constant velocity motion.
I don’t know how many mechanical watches really will last a lifetime, but they will easily last longer than a so-called ‘smart’ watch.
Six years ago I seriously considered purchasing a ‘smart’ watch. Eventually I realised that they were just another money sink and attention leash, and put the money into a couple of automatic watches instead. I still have them, and wear them regularly. Had I bought an Apple or Android watch, I would have replaced it multiple times by now.
That’s the plus side. The minus side is that I don’t wear one of those two every single day because … I gotten bitten by the watch bug, and now I have a pile of other watches, and I wear those too! I still think that I am ahead of the game, though.
BTW, I write ‘smart’ watch because I don’t think they are really that smart; if anything, they should be called unwise watches, because they are an unwise expenditure of resources, money and attention. Also they just don’t look good. I predict that in thirty years we’ll look back on them much as we do digital watches: as a fad.
The minus side is that I don’t wear one of those two
every single day because … I gotten bitten by the watch
bug, and now I have a pile of other watches, and I wear
those too!
This was a big part of the fun for me. Different watches for different days. It's ridiculous, even embarrassing to admit this but -- I feel like the richest, luckiest man in the world when I look at a drawer full of watches from which I can choose each day. As a child I would never have dreamed of it.In reality they are all very modest watches, most under $100. The entire collection is not worth more than a nice laptop. But whatever.
As a bonus mechanical watches, unless I'm mistaken, will last longer if not running 24/7/365.
The best current advice for beginners is probably on the Just One More Watch youtube channel, most watches are in the price bracket that the SKX occupied, and you will learn about micro-brands that exceed Seiko in quality, beat them on price, and under the hood have Seiko movements that are easily replaced & serviced for decades to come.
My Helm Komodo reccomended by Jodi of JOMW gets as much wear as my Rolex Submariner and at a fraction of the price. It isn't the same price or quality, but I enjoy it just as much.
Also knowing that the thing will last forever, take care of it and it will probably outlive you. Can't say that about an Apple Watch.
If you want a good mechanical watch that won't break the bank I suggest picking up a Seiko SKX (though prices have been going up), a Vostok Amphibia (might be hard with the ukraine conflict) or a Timex Marlin.