My neighbor has mesh WiFi. Correction - my neighbor THREE HOUSES OVER has mesh WiFi. How do I know this? Because his multiple access points show up in a scan with ridiculous output power, at nearly the same power as the AP in my own house. WiFi packet captures show these things are enormously chatty, constantly occupying the channels with management traffic to perform their mesh thing.
You want to live out in the country with no one around you for half a mile? Have at it. You live in a dense neighborhood with many APs where channel selection is limited? Fuck anyone and everyone that uses mesh WiFi in this situation. Literally everyone around you suffers so you can have your "very very low latency and super reliability". It's like lighting up a cigar in a crowded train car with no regard for anyone around you.
There is no such limited channel selection in 5Ghz. In 2.4 sure, but 5ghz surely not, with over a hundred channels and poor material penetration.
Meshed 5Ghz is neighbour friendly, not the other way around. Is a saner way of doing wireless network in crowded environments.
Some equipaments even use proprietary protocols and licensed radiobands for the trunk traffic, thus alleviating even more the 5Ghz range.
On which planet do you reside in which this is remotely true?
Many devices (clients and APs alike) do not properly implement DFS. Which leaves the number of usable channels around a dozen or so. And that's in 20 MHz mode. In his quest for more speed, my neighbor runs his network in 40 MHz or 80 MHz mode (can't remember which) which cuts the amount of usable channels in half / quarters. So the rest of the neighborhood deals with interference while he binges 4K Netflix with his Y-fronts around his ankles on the toilet.
The over-gigabit speeds are hyperbole, but in my case I'm regularly seeing ~500Mbps both ways and very consistent latency with no sudden spikes.
Most wireless problems are due to there being a single AP that's barely within reach causing tons of retransmissions which makes any real-time application (such as calls) unusable. It doesn't help that Wi-Fi signal strength meters are completely useless (maybe they should measure actual packet loss instead of RSSI which is only part of the picture) so end-users are unable to tell what's actually going on.
Having APs always within line of sight of the client device solves all these problems.
Certainly not. At home right now I'm getting 566Mbs, but my personal router is 2x2. At work, I get consistently 1.2gigabit on imac.
I’ve played realtime games over it, and haven’t had too much issues, so I guess it’s working well enough for my use case.
It’s possible the actual speed is higher though, and the occasional bursts of nothing are still there (the link to my home is 2Gbit).
They certainly aren't, but most routers can run in AP mode and cost way less than a dedicated AP. One AP per room is pretty overkill, if you do that, you definitely want to turn the transmit power down to help clients roam.
this is the way.
Or you can plug a cable in your notebook and be happy.
Would you mind sharing what equipment you use?
While I now have wired connectivity to my access points, I have friends who don't have that option and would greatly benefit from better wifi. I would love to help them.
I’m so tired of trying to convince friends to get a mesh Wi-Fi network. Guys, it’s 2022: get a Wi-Fi device per room (or one per two rooms) and be happy with your gigabit bulletproof Wi-Fi network.
It’s expensive? Yeah. No pain no gain.
Why? 2,4Ghz networks are from an era where Wi-Fi networks were rare and thus you had no interference.
Today, you are surrounded by (literally) hundreds of networks and your tiny packages need to fight for airtime on those 11 channels.
The only viable solution is 5Ghz Wi-Fi (not to be confounded with 5G mobile network). It comes with much more channels and it doesn’t traverse walls so well (it’s a good thing, because your neighbor’s Wi-Fi signal won’t interfere in yours). So you need at most a wall between you device and the wifi router.
So, nowadays the solution is: several routers on the house, interconnected via a wireless link (not regular Wi-Fi) in a mesh network.
You can get a 1.5gigabit/sec connection between your laptop and the router, with very very low latency and super reliability.