News for hackers. Stuff that matters.
Re:Linux on a 486SX by nousermane on Saturday January 22, 2022 @09:27AM (#30036872)
Few months ago, somebody did a series of live streaming events on bringing up a 486-based tablet PC (which happened to be an old voting machine) with modern linux. Kernel turned out to be the easy part. Booting grub from BIOS that doesn't support LBA addressing (CHS only) - a bit harder. Running X11 on hardware without PCI - ridiculously hard:

https://diode.zone/w/kMhja4oBUvP6CScsiDZP38

Re:Linux on a 486SX by HeckFeck on Saturday January 22, 2022 @09:46AM (#30037062)
Perhaps this was addressed in the video, but I wonder if that tinkerer tried LILO? It is still supported and might fare better with old hardware.
Re:Linux on a 486SX by morganvachon on Saturday January 22, 2022 @10:05AM (#30037282)
Indeed, Slackware still defaults to LILO/eLILO and it works perfectly fine on modern hardware, older hardware from LILO's heyday should be no issue at all.

I still hang on to a PIII based Dell Latitude laptop from 2001 and Slackware -current runs surprisingly well on it (along with BeOS 5.1 from my original disc, QNX RTOS, OpenBSD, NetBSD, and a few other obscure OSes from its generation to today).

Re:Linux on a 486SX by xianwen on Saturday January 22, 2022 @11:49AM (#30038281)
Some modern laptops support only UEFI booting, when booting from internal hard drive. Does LILO/eLILO support UEFI booting?
Re:Linux on a 486SX by nousermane on Saturday January 22, 2022 @11:54AM (#30038338)
Yes. "e" in "eLILO" stands for "EFI".

But then (U)EFI is an OS in itself, you can boot Linux directly from it, no bootloader needed:

https://wiki.archlinux.org/title/EFISTUB

Re:Linux on a 486SX by mwcampbell on Saturday January 22, 2022 @12:02PM (#30038471)
> But then (U)EFI is an OS in itself

Would it be accurate to describe (U)EFI as being like MS-DOS (i.e. single-tasking), but running in protected mode?

Re:Linux on a 486SX by larvaetron on Saturday January 22, 2022 @01:24PM (#30039364)
UEFI technically isn't single-tasking, it has a task scheduler.
Re:Linux on a 486SX by my123 on Saturday January 22, 2022 @12:47PM (#30038962)
Indeed, UEFI is the modern DOS.
Re:Linux on a 486SX by morganvachon on Sunday January 23, 2022 @02:58PM (#30049868)
Yes, eLILO was made for this purpose. I still prefer it to GRUB, though EFISTUB is an option as well for those who don't want or need either, as long as your particular UEFI supports it.
Re:Linux on a 486SX by mattl on Saturday January 22, 2022 @10:35AM (#30037539)
All of those booting on one machine?
Re:Linux on a 486SX by morganvachon on Sunday January 23, 2022 @02:56PM (#30049847)
Swapping hard drives, yes. Slackware boots on the original Windows 98 hard drive alongside Windows, and I have two other drives. One has BeOS 5.1, the other is my test drive I use to try out other OSes (NetBSD is on it right now if I remember correctly, but it hangs during boot sometimes). PATA laptop drives are getting scarce but I do have a PATA-SD adapter lying about that works in a few OSes and I have no shortage of SD cards due to my Raspberry Pi addiction.
Re:Linux on a 486SX by anthk on Saturday January 22, 2022 @03:26PM (#30040505)
Try Delicate Linux. Compile Libressl, then install it at /opt/libressl and recompile Lynx against libressl with

    CFLAGS="-I/opt/libressl/include" LDFLAGS="-L/opt/libressl/lib" ./configure; make; sudo make install.
Try gopher://hngopher.com first and later, https://news.ycombinator.com
Re:Linux on a 486SX by hulitu on Saturday January 22, 2022 @03:06PM (#30040358)
From some time X is a moving target. It's better if you can run XFree86 on old hardware.