There is also an opkg-based package manager and repo with many packages: https://toltec-dev.org/
If you follow these steps and you know a bit about linux you'll be fine.
Factory reset on the rM2 will mess with the community framebuffer service and reset your root password, effectively locking you out unless you go the fiddly way over the external port.
The rM1 is very resilient as you can directly access the internal storage without special tools.
Why do you say connecting over the external port is "finicky"?
Remarkable 2 requires a bit of parts and possibly soldering (but not required, just might make things easier if you don't have pogo pins with handles available).
Both are fully recoverable unless you do something really impressive.
really impressive like what?
I'd love to get work done in sunny locations, like gardens. But these LCD screens make me squint. e-ink would be THE solution to this, but the e-ink displays are too expensive, to well supported and not very big.
But yes, it works as an external screen. Check out VNSee for this https://github.com/matteodelabre/vnsee
Maybe the rM1 might be the best choice for this. I'm not sure...
The rM2 is a lot trickier. A full reverse engineering of the drawing routines is still unfinished, as far as I know. So you either manipulate the memory of their closed source application or reuse big binary chunks of it. There are of course abstraction layers built over that by the community but as of today I believe it's much less refreshing than the rM1.
The rM1 used the chip electrophoretic display controller directly , while the rM2 has a software controller which is closed source. Hence much of the complications
If they were to add a simple plugin system, that would take them 0 effort with Qml, it would be significantly better.
There is also an opkg-based package manager and repo with many packages: https://toltec-dev.org/
The binary patching that you talk about is only one mod that can be installed to improve the functionality of the original GUI. It is true that it would be awesome if that had plugin support, as you stated, though.
Extracted? Last time I look at it, they were inserting a patch in the main (and only) binary of the proprietary GUI via LD_PRELOAD, and then all other programs which wanted to draw _anything_ to the screen would basically _directly alter the memory_ of the proprietary GUI binary in order to modify its internal framebuffer. You have to do that whether you want to integrate with the main GUI or not -- since you need this hack to draw anything to the screen.
Literally every other Remarkable update so far has killed all of this.
> Most components are FOSS.
The usual thing: most 3rd party components which they are forced to open anyway are FOSS. Anything that may even be remotely interesting is NOT FOSS. I do not understand why people try to claim this as a positive, cause it isn't.
Also I don't worry about updates. Why would I connect my notebook to the Internet anyway? I just don't install them.
I guess it's a matter of time before fully open source display drivers are available and I can do my part too to make it happen.
When it happens I will have an ownable very nice, thin and responsible e-notebook. It will never be connected to the Internet and I will patch it myself if I will happen to want a new feature.
Maybe you are right and it could be more FOSS than it is, but in a world where you don't really own anything valuable anymore I am so elated about the hackability of this device that I'll take a bit of tinkering with binary files.
On rM1 it was possible to write to the framebuffer directly, on rM2 it is not exposed as a device file directly.
> To do their job, both the client and the server need to know the address at which a number of functions reside in the Xochitl binary. These addresses change from one release to the next.
This is absurdly fragile. In fact, it's even worse than I was guessing :/.
I'm still very happy with the device but I'll keep that in mind when recommending it to others.
Kobo is pretty similarly hackable to the Remarkables but they are not nearly as open and free as the Pine stuff. I take a look at what remarkable has updated, and they just still haven't gotten ePub support anywhere close to where it should be. I belive it technically converts ePubs to PDF and displays that?? With large books taking minutes to change font sizes. That to me has completely turned me off their devices. Writing may be better but reading is IMO equally important for devices like these.
Wow you're right (at least until this year?): https://wiki.mobileread.com/wiki/Kobo_Firmware_Releases
The Mk3 is the https://en.wikipedia.org/wiki/Kobo_Touch released 10 years ago.
Do you not use it at night or do you use some other solution for nighttime lighting (like bright ceiling lights)?
If the use case is just reading at night, a Kindle with a backlight is probably a better bet.
That said - I like the Remarkable a lot more, and tend to carry it with me more. The kindle has essentially just become my "vacation" reading device since I stopped taking the train for work.
It definitely doesn't need bright lights to read (well, depending on your eyesight). If I want to read/write before bed, I'll keep my side table light on at 25%, and it works fine. If my wife is still watching a show, the tv alone is bright enough I can generally read/write fine.
But it hasn't replaced my e-reader. I read myself to sleep every night, and 80% of mornings wake up with the e-reader lying on the pillow next to me. If I tried that with the Remarkable I'd smack myself in the face every night. I have a hand-size e-reader (Tolino, a German brand) with a backlight, which I use in dark mode so less light to keep the gf awake. Works great.
I could see myself reading a technical manual on the Remarkable, but I'd still need the e-reader. Two different use cases.
I have a folder full of startup ideas. I really want a Lean Canvas page template to go with that (and be able to mix page types in a single notebook would be cool, but I'm not sure that's possible yet).
I want to create a "meeting notes" type of notebook, that automatically adds today's date, and lives in a "meeting notes" folder organised by date.
I'd love to be able to sketch in white on a black background.
I keep meaning to get around to learning how to do this stuff... but life has been getting in the way. Doesn't mean I don't want to ;)
I have a Remarkable 2, and I really enjoy it, but it's more like an upgraded replacement for the legal pad/notebook I would carry around at work.
It does notes and sketches really well. But there's no browser by default on the device. I appreciate it, since it keeps me focused on what I'm doing without distractions (like HN :D ).
source: https://remarkable.com/blog/inside-remarkable-2-chapter-2-th...
Not only that, but I've been blown away by the ongoing results from the team at Remarkable. I only have the Remarkable 1 but they continue to ship updates for it, and these updates are often really substantive with sometimes profound new features. Their cloud service is free, no aggravating subscription stuff and even though they have the remarkable 2 now, they continue to kill it with the updates to improve my experience with the remarkable 1. They, as of right now, have my undying loyalty and appear to be a truly customer focused company. I'd love to buy their entire team a couple beers.
Don't get me wrong, I love pine64 too, but they're way more oriented to us hacker types than ordinary people and I don't want to have to hack together a functioning device with everything I own, though I think they're doong good work none-the-less.