News for hackers. Stuff that matters.
Re:The PineNote is an e-ink notebook that runs Linux by eloeffler on Monday August 30, 2021 @09:58AM (#28355711)
And they give root access to the device along with GPL compliance statements, allowing for a flourishing developer community that creates tons of useful programs that can run on the embedded device. See for example https://github.com/reHackable/awesome-reMarkable for a list.

There is also an opkg-based package manager and repo with many packages: https://toltec-dev.org/

Re:The PineNote is an e-ink notebook that runs Linux by Buttons840 on Monday August 30, 2021 @10:08AM (#28355794)
I'm scared by that link warning about how easy it is to brick your device. Should I be?
Re:The PineNote is an e-ink notebook that runs Linux by eloeffler on Monday August 30, 2021 @11:03AM (#28356314)
Especially: Write down your root password and DO NOT factory reset the device if you want to go back to the original state.

If you follow these steps and you know a bit about linux you'll be fine.

Factory reset on the rM2 will mess with the community framebuffer service and reset your root password, effectively locking you out unless you go the fiddly way over the external port.

The rM1 is very resilient as you can directly access the internal storage without special tools.

Re:The PineNote is an e-ink notebook that runs Linux by Buttons840 on Monday August 30, 2021 @11:40AM (#28356763)
So they provide a factory reset feature, and what that feature does is brick your device? (Or nearly so.)

Why do you say connecting over the external port is "finicky"?

Re:The PineNote is an e-ink notebook that runs Linux by kayodelycaon on Monday August 30, 2021 @12:10PM (#28357153)
The factory reset feature clears personal data off the device and resets the root password. So... it's not a factory reset.
Re:The PineNote is an e-ink notebook that runs Linux by eloeffler on Monday August 30, 2021 @12:12PM (#28357182)
I thought this means something else :D I wanted to say "fiddly", correcting it...
Re:The PineNote is an e-ink notebook that runs Linux by p_l on Monday August 30, 2021 @10:30AM (#28356027)
Remarkable 1 is recoverable without many tricks.

Remarkable 2 requires a bit of parts and possibly soldering (but not required, just might make things easier if you don't have pogo pins with handles available).

Both are fully recoverable unless you do something really impressive.

Re:The PineNote is an e-ink notebook that runs Linux by lovelyviking on Monday August 30, 2021 @11:11AM (#28356376)
>Both are fully recoverable unless you do something really impressive.

really impressive like what?

Re:The PineNote is an e-ink notebook that runs Linux by p_l on Monday August 30, 2021 @02:07PM (#28358856)
Physically breaking the hardware through software, for example. I believe there's some fun possible in most embedded designs like the one used in RM1/RM2. Like manipulating power management circuitry, or maybe forcing overheat with disabled throttling, and the like.
Re:The PineNote is an e-ink notebook that runs Linux by codezero on Monday August 30, 2021 @11:54AM (#28356929)
I rooted my 2 and not my 1 without knowing the risk! Turned out fine but I wasn’t too adventurous.
Re:The PineNote is an e-ink notebook that runs Linux by cies on Monday August 30, 2021 @10:46AM (#28356181)
If this e-ink device is usable as a secondary display for my laptop, I'm in.

I'd love to get work done in sunny locations, like gardens. But these LCD screens make me squint. e-ink would be THE solution to this, but the e-ink displays are too expensive, to well supported and not very big.

Re:The PineNote is an e-ink notebook that runs Linux by eloeffler on Monday August 30, 2021 @11:05AM (#28356325)
There is a community VNC client for it. If you're on Windows you'll need a HDMI dummy plug to simulate a second screen with the proper dimensions.

But yes, it works as an external screen. Check out VNSee for this https://github.com/matteodelabre/vnsee

Maybe the rM1 might be the best choice for this. I'm not sure...

Re:The PineNote is an e-ink notebook that runs Linux by sharikone on Monday August 30, 2021 @05:31PM (#28361105)
In the rM1 you just write to a framebuffer device in /dev/fb0 to write on the screen. It's so easy you could probably write an application that does that, compile it for ARM, load it via scp and run it. All in 15 minutes even if you know nothing about the Remarkable itself.

The rM2 is a lot trickier. A full reverse engineering of the drawing routines is still unfinished, as far as I know. So you either manipulate the memory of their closed source application or reuse big binary chunks of it. There are of course abstraction layers built over that by the community but as of today I believe it's much less refreshing than the rM1.

The rM1 used the chip electrophoretic display controller directly , while the rM2 has a software controller which is closed source. Hence much of the complications