News for hackers. Stuff that matters.
Re:Ploopy: open hardware trackballs and mouse by tempodox on Tuesday August 24, 2021 @03:36AM (#28286017)
In theory a trackball is nice (I've used one for years). Your wrist can rest while your fingers do the moving, and it keeps rotational momentum after you lift your fingers, making long movements easier. However, your fingers will always be a little sweaty and the ball will deposit that on the wheels inside the device that transmit the movements. Keeping those clean over time can be quite a chore, but if you don't clean them the transmission will become unreliable.

If a trackball could be magnetically suspended so it floats without touching anything and still transmit its movements, that would be perfect. You'd only have to clean the ball itself once in a while, and that would be easy enough.

Re:Ploopy: open hardware trackballs and mouse by andix on Tuesday August 24, 2021 @05:50AM (#28286765)
My Logitech MX ergo doesn’t need a lot of cleaning. Once in a while maybe. But it is designed in a way that the dirt comes out at the bottom by itself. There are also no wheels, it uses optical detection of movement, like an optical mouse.

Once in a while a hair or some dust gets stuck in front oft the sensor. Then you need to clean it. But this happens maybe twice a year for me.

Re:Ploopy: open hardware trackballs and mouse by benhurmarcel on Tuesday August 24, 2021 @06:34PM (#28295825)
I need to clean mine every few weeks, but it’s really not a problem. When I notice more friction than usual, I just pop the ball out with a pen and clean the contacts and ball with whatever cloth.
Re:Ploopy: open hardware trackballs and mouse by morsch on Tuesday August 24, 2021 @04:00AM (#28286136)
Trackballs don't use the wheels to transmit the movements these days (at least modern Logitech trackballs don't seem to). They're using optical sensors, just like mice. Of course, there is still some contact surface like a wheel or a bearing to clean.
Re:Ploopy: open hardware trackballs and mouse by stavros on Tuesday August 24, 2021 @10:12AM (#28289085)
Can confirm, tracking is always the same quality, but the increased friction leads to the ball losing momentum. Right after a cleaning (which takes five seconds), the ball sounds freely for a long time after a hard spin, but a few days later it stops pretty quickly.
Re:Ploopy: open hardware trackballs and mouse by easygenes on Tuesday August 24, 2021 @03:45AM (#28286064)
Probably a ball with a fine black and white grid pattern and a fast imaging sensor could be used to achieve this. So long as it's sending updates at around 100hz, should be pretty performant.

Edit: Could also probably be something that's alternating bright and dark in IR so the ball doesn't look weird.

Re:Ploopy: open hardware trackballs and mouse by henriks on Tuesday August 24, 2021 @03:57AM (#28286127)
The one I have from Logitech uses an optical sensor for the movement itself. Gunk still builds up in the small balls that ensure the trackball itself rolls smoothly, so those have to be cleaned regularly anyway.
Re:Ploopy: open hardware trackballs and mouse by easygenes on Wednesday August 25, 2021 @02:45AM (#28298655)
Yeah, OP author mentioned magnetic suspension of the ball so I was kind of assuming that. A challenge with the magnetic suspension would be the "floaty" nature of it. You would have to filter out the noise of the ball itself getting moved around a bit as you rotate it.
Re:Ploopy: open hardware trackballs and mouse by unnouinceput on Tuesday August 24, 2021 @03:56AM (#28286122)
IR and UV, much easier to decode as they are at opposite spectrum of visible light.
Re:Ploopy: open hardware trackballs and mouse by schwartzworld on Tuesday August 24, 2021 @11:56AM (#28290526)
> the ball will deposit that on the wheels inside the device that transmit the movements

This was my experience in the 90s, but my kensington expert uses lasers for tracking position and this is a non-issue.

Re:Ploopy: open hardware trackballs and mouse by __mharrison__ on Tuesday August 24, 2021 @12:49PM (#28291436)
Anecdata: I have a 8 year-old CST trackball that has never been cleaned. (That sounds really gross.) It works fine.

However, I think I should clean my ErgoDox and mouse soon... thanks for the inspiration.