I have more expensive gear. The value here is not really in the audio quality - which, apart from the most strenuous audio engineering flat-response-and-detailed-image-needed cases, is fine, really - but in being light and cheap and embracing that quality. It rattles a little when you hold it, but it's made to withstand a few drops, and it won't pressure your skull or force your neck out of posture with hours of use. The cable is soldered in but sturdy.
The $75 ones I've used always tend to end up with issues because they don't have these qualities. The cables are still soldered but of a lower thickness, and the rigidity of the frame makes them disconnect more readily. They pinch your ears and crush your skull. The quality is better but not enough to matter in everyday use - a good DAC and a low-noise environment makes more difference.
Better example in the headphone world were high-end IEM's (Shure/Westone/Etymotics). Most of them were in the many hundreds of dollar range for good multi-driver units. In the past few years though Chinese manufacturers (KZ is one I can think of off the top of my head) sell their own lines on aliexpress/taobab using the same drivers for 10% of the cost.
I can't justify recommending the old names now to people, the value just isn't there (and most of the old big names stopped producing in US/EU since China turned out to have better QC). Why pay $200 for a double-driver Westone when I can recommend a 5-driver KZ unit for $60? I just don't get it.
I don't need the best tools in the world for my home toolbox. I use each tool maybe a couple of times a year and even the cheap ones don't break at that level of use. I bought a $250 RC car and a $10 one, and while the $250 one is awesome I've gotten more use out of the $10 one. Sometimes you need quality but sometimes you don't.
- easier to store - easier to use - pack more power (thus less time spend) - more precise (i'm annoyed if my angles are one millimeter off) - less brittle (its not that cheap ones are breaking, its that even a small, almost invisble chip of metal off your torx head will make your life harder) - less dusty - safer - easier to clean - Combine themselves (transformers for woordworking smh) - Have complete accessories (angle transmission being the most usefull, also the protractor going directly on the radial saw gives you perfect results)
If you want to replace a door with cheap tools, be my guest, i did it once with a friend, i'm not doing it ever again. I'm now bringing my tools every single time.
I've got both professional tools and el-cheapos so I'm familiar with all your plus points, but I still think that parent has a point.
IME, "buying cheap" does not mean "a tool that breaks on the second use", or "makes your life harder". It means "I don't use this tool frequently enough to care enough to pay more".
I've got a cheapo cordless screwdriver that works well enough to do battery replacement on children's toys and similar. When I want to drive self-tappers into wood I use an expensive driver in the garage.
Yes, it does mean I have spent more money than absolutely necessary, but on the other hand I have a lot of cheap tools that are perfectly serviceable for the two times a year I actually need to use them.
It works for me, you go do what works for you.
However there are some exceptions to the rule, for example I would never buy a low quality notebook or a low quality car.
If the price of the high quality product is too high for me, then I don't try to look for a cheaper model immediately, but try to go second hand first.
Never ever buy cheap jack stands for instance. The extra money you spend on the good ones is just life insurance.
So yes, I also want the best of the best and "buy it for life" but I'm starting to think that sometimes this classification is a bit overrated and you need to find a very good balance between price and quality.
My hobbies and interests are more established. I know which tools I use a lot, how I use them, and where spending more makes a difference. I've owned and outgrown my entry level gear.
That, and I have more disposable income. I can afford long term investments because they don't incur short term deprivation.
On the other hand, when trying something new, I still go with the cheaper option until I can appreciate what a better tool would do. In most cases, I find that the cheap tool is enough.
I'm now at the point where I crave quality at just about any cost because it's abundantly clear to me that buying crap is bad value. Many of the few high quality things I bought early on in life are still with me and I love them. But so is a huge amount of the garbage I bought earlier and I hate it.
So where I used to go into shops and look at all the expensive items with scorn and think "what idiots must there be who buy all these things that are twice the price!", now I go in and actively try to find out "but is there an even more expensive one I could get with higher quality?"