Re:Digital Audio 101: Playing Audio from a Microcontroller
by dvh on Thursday April 15, 2021 @03:33PM
(#26825132)
I'm using this for guitar pickup (2.5H 5kOhm, 30pF, 50mV@440Hz), you can modify it to be more like dynamic speaker (e.g. 8ohm Rs, smaller L0 which you measure from actual speaker)
.subckt sub_pickup_1 a b
L0 a 1 2.5 NT=1
Rs 1 b 5000
Cp a b 3.0E-11
Rp a b 10000000
V1 a 2 DC 0 AC 0.01 0 SIN(0 0.05 440 0 0 0)
R1 2 b 1
.ends sub_pickup_1
xL1 7 0 sub_pickup_1
Re:Digital Audio 101: Playing Audio from a Microcontroller
by amelius on Thursday April 15, 2021 @06:14PM
(#26826827)
Thanks, but it's not clear to me how/if you modeled the electrical losses related to emitted acoustic power.
Re:Digital Audio 101: Playing Audio from a Microcontroller
by dvh on Friday April 16, 2021 @05:38AM
(#26831684)
Rp is large parallel resistor across that can simulate loses I think.
Re:Digital Audio 101: Playing Audio from a Microcontroller
by nerfhammer on Thursday April 15, 2021 @03:06PM
(#26824836)
a piezo is more like a capacitor
So, for example, a speaker will become an inductor with a series resistor to represent losses, and another resistor to represent power that is converted to audio.
The reason for asking is that I want to be able to plug it into a simulator (spice) and also simulate the mechanical part (using an electrical equivalent circuit).
EDIT: found something here: https://audiojudgement.com/speaker-equivalent-circuit/