News for hackers. Stuff that matters.
Re:Setting up Starlink by tyingq on Saturday April 10, 2021 @08:39AM (#26761042)
Aside: The router design is as impractical as it is futuristic. The thing would fall over if you looked at it sideways, and the solitary LED on the front was hard to see unless in a dark room or looking closely, straight at it. Hopefully a 2nd iteration will be better!

Wow, he's right about the shape of the router. It also looks like it forces the ethernet cable in front if you want to be able to see the LED, and the cable itself is pointed downward: https://preview.redd.it/42rc9fkqwnw51.jpg?width=960&crop=sma...

I suppose that's a minor nit, given what Starlink delivers, though. I'm curious how practical it might be for on-board aircraft wi-fi. That's a space that could use a leap in bandwidth/tech, as FAA certification makes it difficult to keep equipment current. I'm curious if tracking is hard since the satellites and the "ground station" are both moving around...the aircraft on all axis points.

Re:Setting up Starlink by tw04 on Saturday April 10, 2021 @09:04AM (#26761188)
>Wow, he's right about the shape of the router. It also looks like it forces the ethernet cable in front if you want to be able to see the LED, and the cable itself is pointed downward: https://cdn.hackaday.io/images/8430831598574092393.jpg

I'm not sure the image you link is a fair representation of the router. The one he actually shows is SIGNFICANTLY shorter/smaller/wider and honestly while it's similar it's a different shape.

https://i.imgur.com/Pdw4cAf.jpeg

Re:Setting up Starlink by walrus01 on Saturday April 10, 2021 @09:12PM (#26766744)
I have one and it's really light weight and prone to tipping over, it was only used for five minutes during the initial setup. Based on some people who found the serial pins and watched its booloader it's based on a customized openwrt, the circuit board is pretty basic.

there's some good shots in here of the router removed from its enclosure: https://www.youtube.com/watch?v=ObCTB8ol3Ng

it doesn't seem much more complicated to me than the PCB of something like a mikrotik hap ac2 ($65), based on simplicity I'd say it's like a $40-50 router BOM, max.

Re:Setting up Starlink by tyingq on Saturday April 10, 2021 @09:13AM (#26761241)
Hrm, okay. Linked to a different image that shows the shape from two different aspects.
Re:Setting up Starlink by boardwaalk on Saturday April 10, 2021 @11:13AM (#26762035)
Acting like the LED not being bright is a /negative/ thing is odd to me. Why would you care if it’s lit up unless you’re investigating an issue and you’re right in front of it anyways? Just seems well designed to me.
Re:Setting up Starlink by geerlingguy on Saturday April 10, 2021 @11:22AM (#26762103)
I absolutely detest bright LEDs, but in this case, it's a dim LED set back in a recessed hole in the router that is hard to make out at all unless viewing it straight on.

Better this than a blaring blue LED I guess, but it would be nice to just have it easier to see in general. Having a shiny brushed reflective surface to the router (instead of, say, black or pure white) exacerbates the problem.

The router looks 'cool' like the Cybertruck, but could use some refinement physically. The shape also makes it hard to mount on a wall, or even to place it horizontally if the need arises.

Re:Setting up Starlink by oxplot on Saturday April 10, 2021 @10:19AM (#26761647)
Note that one can use any router with the dish. Basically the dish provides you with a NATed private IP which you can assign to the WAN interface of your router of choice and go from there.
Re:Setting up Starlink by wyager on Saturday April 10, 2021 @01:44PM (#26763363)
It’s a bit more complicated than that if you want reliability. They have two IP ranges on the same physical link, and their patched DHCPD is not standards compliant. If the dish loses its connection, you will be stuck with a useless local IP unless you block DHCP leases in the 192.168 range.
Re:Setting up Starlink by tyingq on Saturday April 10, 2021 @10:23AM (#26761673)
Oh, that's interesting. Is the router then completely just a commodity thing that has no specific Starlink functionality at all?

Edit: Some reddit posts suggests the Starlink App doesn't work if you don't use the router. But also that the app isn't terribly useful outside of the "obstructions view", which is mostly a one-time need during installation.

Re:Setting up Starlink by ShockedUnicorn on Saturday April 10, 2021 @11:26AM (#26762139)
The starlink app works with your own router, you just need to set up a static route.

https://www.reddit.com/r/Starlink/comments/jqhoqz/starlink_a...

Re:Setting up Starlink by yokem55 on Saturday April 10, 2021 @11:32AM (#26762192)
It works fine if you add a static interface route to 192.168.100.1/32 on the wan interface of your router.
Re:Setting up Starlink by freedomben on Saturday April 10, 2021 @10:34AM (#26761758)
That's correct. The starlink app only works when using the included router. The app is useful if you like to see numbers and graphs of dropped packets, throughput, etc, but otherwise isn't needed.
Re:Setting up Starlink by geerlingguy on Saturday April 10, 2021 @11:24AM (#26762117)
I haven't tested this yet, but apparently if you use your own router you may be able to get an IPv6 address assigned.
Re:Setting up Starlink by mensetmanusman on Saturday April 10, 2021 @09:02AM (#26761179)
I use the command interlocking strips for all my devices that I want standing up: https://www.command.com/3M/en_US/command/products/~/Command-...

E.g. putting echo dots near a ceiling, or little lamps in a spot to prevent tipping by children, for routers to stand, etc.

I like the satisfyingly ‘click’ when things are in place :)

Re:Setting up Starlink by ncallaway on Saturday April 10, 2021 @08:47AM (#26761085)
> I'm curious how practical it might be for on-board aircraft wi-fi

I suspect it'll work well for this scenario. My understanding is that the cruising speed of a plane is relatively slow compared to all the other motion involved (LEO satellites move fast!). The US Air Force is reportedly working with SpaceX to test Starlink in various conditions including in flight https://www.avweb.com/aviation-news/air-force-testing-starli....