News for hackers. Stuff that matters.
Re:Masks distributed in Canada with microscopic graphene pot... by dukeofdoom on Wednesday March 31, 2021 @10:06AM (#26647471)
Wow, this seems like 4chan conspiracy theory becoming reality. Will the worm one turn out to be true too?

On a side note, what kind of idiot puts graphene in masks, when its so widely known that graphene is a carcinogen. How can this not be maliciously done.

Re:Masks distributed in Canada with microscopic graphene pot... by scrollaway on Wednesday March 31, 2021 @10:57AM (#26648132)
We had similar drama with masks distributed in Belgium. They contain nanoparticles of silver. The government gave an official recommendation to stop wearing them.

Original report: https://www.brusselstimes.com/news/belgium-all-news/156628/c...

Follow-up recommendation: https://www.brusselstimes.com/news/belgium-all-news/156876/b...

I'm still wearing mine because I don't go out often enough for it to matter (and when I do, I'm usually on a bicycle where it's not required to wear one). But what a fucked up story. I really thought this would be the end of it: anti-maskers "won", are set for life with an argument on a silver platter now. With actual silver.

Surprisingly, though, that didn't happen. People have been pretty chill about it.

Re:Masks distributed in Canada with microscopic graphene pot... by henvic on Wednesday March 31, 2021 @11:49AM (#26648773)
Geez... I bought masks in the street market here in Rotterdam (Netherlands), and now I'm worried. Thankfully, I only wear them a few minutes a day, when I go to public closed spaces.
[dead]
Re:Masks distributed in Canada with microscopic graphene pot... by abduhl on Wednesday March 31, 2021 @12:03PM (#26648945)
Alternatively, mask arguments are ultimately emotional for one (both at this point?) side at some point and there is no overcoming emotion with logic or evidence.
Re:Masks distributed in Canada with microscopic graphene pot... by ghaff on Wednesday March 31, 2021 @12:17PM (#26649139)
There's a middle ground along the lines of we should keep wearing them in enclosed public spaces until a significant percentage of the population is vaccinated. But there are also significant contingents of anti-maskers on the one hand and you have to wear masks anywhere outside your home period on the other.
Re:Masks distributed in Canada with microscopic graphene pot... by abduhl on Wednesday March 31, 2021 @12:28PM (#26649272)
The arguments that both sides use to support their positions don’t recognize such a limitation, so why should the middle ground you propose be where we draw the line? People opposed to masks claim an infringement in their rights. People in favor of masks all the time claim it’s a small price to pay for the greater good.

As an aside, it’s interesting to view the masks in light of people’s opinions on Muslim countries’ head covering requirements for women. People against them say it’s an infringement on women’s rights. People for them say it’s a small price to pay for the greater good.

Re:Masks distributed in Canada with microscopic graphene pot... by whatshisface on Wednesday March 31, 2021 @12:37PM (#26649412)
The case for the greater good is a lot stronger in one case than the other.
Re:Masks distributed in Canada with microscopic graphene pot... by abduhl on Wednesday March 31, 2021 @12:39PM (#26649447)
You're talking about the Muslim head covering requirement here, right? Because it seems to both protect from COVID and protect from whatever harm the Muslim countries think women showing a little skin will cause. Do you think that Western countries should also ban women from being outside without a head covering (for the greater good, of course)? If not, why not? If it is because it's an infringement on women's rights, why do their rights matter more than anyone else's?

Do you see how the whole thing has become emotional and why having the mask argument is a bit silly at this point?

Re:Masks distributed in Canada with microscopic graphene pot... by whatshisface on Wednesday March 31, 2021 @12:41PM (#26649489)
>whatever harm the Muslim countries think women showing a little skin will cause

Is there really a case for that? I thought that was just something the authorities made up. In contrast, COVID is actually real. I would find it pretty surprising if they were offering justification for their cultural norms on a factual or material basis.

Re:Masks distributed in Canada with microscopic graphene pot... by abduhl on Wednesday March 31, 2021 @12:44PM (#26649535)
It's an interesting claim you make about the authorities making something up. Compare your views on COVID mask usage and the changing requirements/recommendations from the authorities (CDC, WHO, whatever your local health organization is) with Muslim countries' "made up" justifications. At least the Muslim countries are consistent.
Re:Masks distributed in Canada with microscopic graphene pot... by whatshisface on Wednesday March 31, 2021 @12:47PM (#26649591)
Masks prevent aerosol transmission independently of whatever the official guidance happens to be today. That's a material, factual basis for wanting people to wear them - independent of whatever cultural norm different people happen to adopt around it. There isn't a corresponding basis for those cultural norms in Muslim countries, which are self-sustaining cultural norms with no material condition at their core.
Re:Masks distributed in Canada with microscopic graphene pot... by abduhl on Wednesday March 31, 2021 @01:00PM (#26649789)
Well it seems like you've shifted the goal posts now to me. The original conversation was about whether a certain government mandate (read: official guidance) is supportable by a "greater good" argument and now you've changed it to a question of whether or not it's supportable by (what you deem) a "material, factual" basis. In fact, you've tried to remove the government mandate part from the entire conversation!

I'm sure the Muslim countries think that their basis is just as material and factual as the COVID science. I don't know why you're arguing here: head coverings are de facto masks as long as they cover the face, you should be in favor of mandatory use. It aligns with your material, factual basis. You've yet to articulate a reason why a head covering mandate is a bridge too far. Keep in mind that men are more susceptible to COVID than women and so there may be an argument to be made that constraining women will help to protect the most vulnerable sex (men).

I say all this to emphasize that public policy debates are not so easy when both sides come to the table in bad faith and with an agenda.

Re:Masks distributed in Canada with microscopic graphene pot... by antibuddy on Wednesday March 31, 2021 @01:18PM (#26650073)
It's not, but it's still a false equivalent.
Re:Masks distributed in Canada with microscopic graphene pot... by antibuddy on Wednesday March 31, 2021 @01:08PM (#26649906)
That is not a middle ground. That is an extreme position.

Using a roughly tested vaccination which does not even stop the spread of the virus (from vaccinated people that is) widespread, sounds not like a good proposition.

Also lethality of COVID-19 turns out to be ~0.23%[0]. And while we know nothing of long-term effects of the new gene therapy vaccination, it already seems more deadly than COVID-19 short-term[1].

Maybe gene therapy vaccinations will be the future (that could be game changing), but this whole disaster really steals credibility.

[0]:https://www.who.int/bulletin/online_first/BLT.20.265892.pdf

[1]:https://wonder.cdc.gov/vaers.html

Re:Masks distributed in Canada with microscopic graphene pot... by maxerickson on Wednesday March 31, 2021 @01:10PM (#26649946)
You are either confused in several different ways or intentionally spreading misinformation.

Please stop.

Re:Masks distributed in Canada with microscopic graphene pot... by antibuddy on Wednesday March 31, 2021 @01:12PM (#26649987)
WHO and CDC are sources of misinformation? What are you talking about?
Re:Masks distributed in Canada with microscopic graphene pot... by maxerickson on Wednesday March 31, 2021 @01:16PM (#26650044)
Linking to the top level of VAERs and claiming it says something it doesn't is the issue. You also seem to misunderstand the mechanism of action of the various vaccines.
Re:Masks distributed in Canada with microscopic graphene pot... by antibuddy on Wednesday March 31, 2021 @01:37PM (#26650317)
"You also seem to misunderstand the mechanism of action of the various vaccines."

> I did not say anything about the mechanism.

"Linking to the top level of VAERs and claiming it says something it doesn't is the issue."

> That is not what you said tho. You said I spread misinformation. I did point to top level because the links to the actual query are not working after a few days. Just query it for COVID-19 vaccines and sort it by events reported or pick death as symptom beforehand.

Result: 3.5% dead. There is no distinction made if it is coincidence (which is not made with COVID-19 as well) and it's not representative, given that elderly are vaccinated first. Average age of vaccination is 50 years afaik. It's even a pretty high lethality compared to COVID-19 lethality for an average age of 80 btw.

Re:Masks distributed in Canada with microscopic graphene pot... by maxerickson on Wednesday March 31, 2021 @01:42PM (#26650398)
More than 90 million people have been administered the vaccines.

You are using the wrong denominator.

Deaths reported as adverse events aren't necessarily due to the vaccine (they may be reported simply because they happen after administration of the vaccine).

The vaccines do not gene edit (this is what 'gene therapy' implies).

Like I said, you are confused in multiple ways and should stop.

Re:Masks distributed in Canada with microscopic graphene pot... by antibuddy on Wednesday March 31, 2021 @02:19PM (#26650952)
"You are using the wrong denominator."

> I did not use a denominator. It was the CDC. Do you have a problem with their methodology?

"Deaths reported as adverse events aren't necessarily due to the vaccine (they may be reported simply because they happen after administration of the vaccine)."

> You repeated what I said, but omitted a part. This distinction is not made (and cannot be made most of the time) with COVID-19. It's therefore an equivalent comparison. Well, as long as you compare it to mortality rate on population rather than infected that is (0.23% is for infected).

"The vaccines do not gene edit (this is what 'gene therapy' implies)."

> I'm not even sure why you are so annoyed by gene therapy. It plays no part in my argument. If you don't like gene therapy, then call it new vaccination method X. It's weird how people are alarmed by the moniker "gene therapy", but do it anyway if you don't call it like that.

"Like I said, you are confused in multiple ways and should stop. "

> You said I spread misinformation while using CDC and WHO. That was clearly not correct. Direct your anger at my argument and not at me please; maybe you see the futility of your anger then.

Re:Masks distributed in Canada with microscopic graphene pot... by maxerickson on Wednesday March 31, 2021 @02:28PM (#26651063)
You, with no acknowledgement, edited the worst of it out of your initial comment!

My goodness.

Re:Masks distributed in Canada with microscopic graphene pot... by antibuddy on Wednesday March 31, 2021 @03:31PM (#26651962)
What are you talking about? It sounds to me like you are out of arguments.
Re:Masks distributed in Canada with microscopic graphene pot... by trutannus on Wednesday March 31, 2021 @10:19AM (#26647649)
They're manufactured in China, where quality control can be low to non-existent. My best guess is that somehow the batches got contaminated in the factory.

The current admin in Canada has spent the majority of the pandemic failing to vet companies properly, so this is very unsurprisingly to me.

Re:Masks distributed in Canada with microscopic graphene pot... by sudosysgen on Wednesday March 31, 2021 @12:55PM (#26649718)
It's not a question of quality control.

The masks were advertised as containing graphene. It was supposedly used for filtration.

Re:Masks distributed in Canada with microscopic graphene pot... by passerby1 on Wednesday March 31, 2021 @11:45AM (#26648725)
Masks being discussed were made in Canada:

> ..SNN200642 masks made by a Quebec-based manufacturer are being recalled..

Re:Masks distributed in Canada with microscopic graphene pot... by flyingfences on Wednesday March 31, 2021 @11:49AM (#26648765)
> Radio-Canada has obtained documents showing Health Canada warned of the potential for "early pulmonary toxicity" from the SNN200642 masks which are made in China and sold and distributed by Métallifer, a Quebec-based manufacturer.
Re:Masks distributed in Canada with microscopic graphene pot... by throwawayfrauds on Wednesday March 31, 2021 @12:29PM (#26649283)
The article says that they are made in China, the company is based in Quebec.
Re:Masks distributed in Canada with microscopic graphene pot... by cxcorp on Wednesday March 31, 2021 @10:21AM (#26647677)
I wonder if the Quebec government tested the masks for things like this? Especially, considering:

> Back in December, the Quebec government revealed that masks it had been distributing for months to more than 15,000 daycares across the province did not meet safety standards, and daycare staff were ordered to stop using them.

> Between May and November, the ministry distributed 31.1 million MC9501 masks throughout the network to protect staff from COVID-19, but they were determined to be unfit for use.

Fool me once...

Re:Masks distributed in Canada with microscopic graphene pot... by shawnz on Wednesday March 31, 2021 @10:31AM (#26647785)
What should they have tested for besides graphene? Is there some list of contaminants which you feel would be a minimum requirement for their testing, which includes graphene?

Moreover do you know what kinds of tests they actually did perform? Without knowing that, how can you judge whether the level of testing was adequate or not? Have you looked into the rate of contaminants being found on their competitors products? Etc.

Re:Masks distributed in Canada with microscopic graphene pot... by cxcorp on Wednesday March 31, 2021 @11:12AM (#26648318)
You are right, I was quick to judge without knowing. Thanks.
Re:Masks distributed in Canada with microscopic graphene pot... by sudosysgen on Wednesday March 31, 2021 @01:10PM (#26649942)
It's really not an issue of testing.

It's much worse - it's written on the box that there is graphene in it.

Re:Masks distributed in Canada with microscopic graphene pot... by microplastics on Wednesday March 31, 2021 @10:36AM (#26647852)
Agree, with the caveat that specific testing for graphene is actually not trivial (it is fundamentally carbon). But functional safety testing, supplier surveys, etc can be put in place to catch this sort of issue upstream.
Re:Masks distributed in Canada with microscopic graphene pot... by 908B64B197 on Thursday April 01, 2021 @01:06PM (#26663261)
Sounds like they bought first and then tested later. Not a bad strategy for equipment in short supply.
Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Wednesday March 31, 2021 @10:23AM (#26647703)
I was wondering if that will bubble over... it kinda looked like way too many videos were spreading on 4chan for it to be fake, but we'll see. Really odd with those videos and the "graphene strands" start wiggling - probably just graphene exposed to heat?

I expect things there to be faked. Anyone with credibility seen the videos care to comment?

Re:Masks distributed in Canada with microscopic graphene pot... by freeone3000 on Wednesday March 31, 2021 @10:42AM (#26647946)
When air moves around small fibers, they move. Look at literally any fibrous material under a microscope and you'll see this -- it's really cool to see exactly how small individual fibers in a thread are!
Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Wednesday March 31, 2021 @11:06AM (#26648245)
Yeah but the videos are more than just "air" - they don't move until applied moisture/heat then they move on their own without more. Kind of like those Japanese dishes with little flakes on them?
Re:Masks distributed in Canada with microscopic graphene pot... by ceejayoz on Wednesday March 31, 2021 @11:31AM (#26648551)
Anyone with frizzy hair can conclusively tell you inert, dead material can change with moisture/heat.
Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Wednesday March 31, 2021 @11:41AM (#26648673)
You're doing a generalization without looking at the vid... why not look?
Re:Masks distributed in Canada with microscopic graphene pot... by ceejayoz on Wednesday March 31, 2021 @11:45AM (#26648723)
I did.

As a kid, I had these: https://www.amazon.com/Magic-Capsules-various-themes-package...

They moved, grew and changed shape when put in water, too. That doesn't make them alive.

Or this: https://www.youtube.com/watch?v=JGPfSSUlReM

A thin strand of material moving around when put in water is not at all surprising to me.

Re:Masks distributed in Canada with microscopic graphene pot... by Igelau on Wednesday March 31, 2021 @12:20PM (#26649187)
> They moved, grew and changed shape when put in water, too. That doesn't make them alive.

Or they were alive and part of a shadow operation to deploy an army of plasticky animals into homes.

Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Wednesday March 31, 2021 @02:19PM (#26650950)
So a cell isn't alive? It moves in a stream of water and other stuff(s). I guess not that surprising.
Re:Masks distributed in Canada with microscopic graphene pot... by ceejayoz on Wednesday March 31, 2021 @03:38PM (#26652061)
A cell is alive.

Some things move because they're alive. Some living things don't move. Some non-living things move, too.

Movement is not conclusive evidence of life. These videos - setting aside the legitimacy of 4chan for a moment - demonstrate "if you put the fiber in water, it moves", not "these fibers are alive".

Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Thursday April 01, 2021 @02:38AM (#26657276)
Well, given that there exists no formal definition of life then that's just like, your opinion, man.

I say that in jest, but, it has merit. Any definition you try will be contested, even in academia.

Re:Masks distributed in Canada with microscopic graphene pot... by kergonath on Wednesday March 31, 2021 @11:35AM (#26648600)
Graphene is all the rage. The best thing since sliced bread (or, perhaps more accurately in this case, the best thing since radium water).

It sounds advanced and science, with Nobel prizes and stuff. I am not surprised it sells.

Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Wednesday March 31, 2021 @03:34PM (#26652006)
Re:Masks distributed in Canada with microscopic graphene pot... by hmd_imputer on Wednesday March 31, 2021 @10:16AM (#26647595)
exactly. I have even seen a video where they found one on a test kit that you push all the way thru your nose.
Re:Masks distributed in Canada with microscopic graphene pot... by esperen on Wednesday March 31, 2021 @11:44AM (#26648712)
I didn't know it was classified as a carcinogen, what are your sources on this?
Re:Masks distributed in Canada with microscopic graphene pot... by jcims on Wednesday March 31, 2021 @11:51AM (#26648793)
There are some studies with carbon nanotubes and mesothelioma. Hard to say if graphene would have the same effect, but it seems plausible as CNTs are essentially graphene tubes.

https://www.cell.com/current-biology/fulltext/S0960-9822(17)...

Re:Masks distributed in Canada with microscopic graphene pot... by corty on Wednesday March 31, 2021 @12:07PM (#26649002)
Cheap bulk methods for graphene production will also create other modifications of carbon such as nanotubes. So even if Graphene should be harmless, it might be impure and therefore dangerous.
Re:Masks distributed in Canada with microscopic graphene pot... by yumraj on Wednesday March 31, 2021 @01:14PM (#26650002)
> On a side note, what kind of idiot puts graphene in masks, when its so widely known that graphene is a carcinogen. How can this not be maliciously done.

It says it's made in China.

Re:Masks distributed in Canada with microscopic graphene pot... by thunkshift1 on Wednesday March 31, 2021 @12:27PM (#26649254)
Ok, ill bite...What worm one?
Re:Masks distributed in Canada with microscopic graphene pot... by ksaj on Wednesday March 31, 2021 @05:22PM (#26653339)
This is quite literally the myth involving ham or pork and soda pop. Of course in that case the "worms" were just the fat moving and solidifying from the carbonation. This time it is someone, apparently for the first time, discovering that wickable* fibers found in masks tend to move about when liquid is absorbing into or evaporating from them. Of course these fibers are in a lot of other places, including your winter clothing and anything else absorbent you might happen to wear.

Someone in another response pointed out the Japanese dishes with dry bonito flakes that move around in animate style when subjected to steam. It's exactly the same thing.

* Wickable might not be a real word. I mean "able to wick" as any absorbant fiber can.

Re:Masks distributed in Canada with microscopic graphene pot... by dukeofdoom on Wednesday March 31, 2021 @12:34PM (#26649382)
Re:Masks distributed in Canada with microscopic graphene pot... by fokinsean on Wednesday March 31, 2021 @01:41PM (#26650392)
I also just read people are reporting them on the test swabs. I literally just got a test lmao.

I'm sure this has a reasonable explanation though, right?

Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Wednesday March 31, 2021 @02:22PM (#26650989)
https://news.ycombinator.com/user?id=ceejayoz

Any dead material with moisture or air exposed to it will cause it to move. Typical really!

/s

I poke because, I mean of course we're considering those things. I am not trying to peddle conspiracy theories. I want to fundamentally know why; generalizations don't help here.

Re:Masks distributed in Canada with microscopic graphene pot... by fokinsean on Wednesday March 31, 2021 @02:32PM (#26651118)
Yeah, I've honestly gotten to the point where I'm not surprised by anything anymore and can't tell truth from fiction.

Another fun one is the use of Ethylene Oxide to sterilize the swabs. It is a carcinogen but it seems like it's is used in many places.

It was just funny that I stumbled on the ethylene and worm thing _after_ I got my test today.

Re:Masks distributed in Canada with microscopic graphene pot... by pyinstallwoes on Wednesday March 31, 2021 @02:51PM (#26651391)
It's absurd really. Thankfully I'm hearing others with similar introspections. I was feeling quite crazy. Maybe we'll come out of this okay by being curious.
Re:Masks distributed in Canada with microscopic graphene pot... by fokinsean on Wednesday March 31, 2021 @02:59PM (#26651486)
Yeah I like to remain optimistic, IMO that is the only way to stay sane.

It's just funny how total opposite realities can coexist. I get a NYT daily email which makes it sound like everything is okay, vaccines are working great, etc, then I can spend 10 minutes reading `/r/conspiracy` and it really throws you upside down. Not to say that everything said there is true (I know most of it is likely bs), but I enjoy seeing the total opposites ends of the spectrum.