News for hackers. Stuff that matters.
Re:Van Eck Phreaking by tyingq on Wednesday March 24, 2021 @04:13PM (#26572311)
If you want to try it yourself:

https://www.youtube.com/watch?v=DlVM9xqGKx8

Plays Für Elise on a radio placed close to your monitor while you play that video full screen.

Re:Van Eck Phreaking by tgsovlerkhgsel on Wednesday March 24, 2021 @04:29PM (#26572483)
I always thought it requires a CRT screen, but I got a surprisingly clear signal from my LCD screen.

Why does this work? Where does the recoverable signal leak? I would expect a modern LCD to be full of digital signals sent in unpredictable, manufacturer-specific ways, and certainly not sequentially enough to leak as recognizable audio.

Re:Van Eck Phreaking by segfaultbuserr on Wednesday March 24, 2021 @08:44PM (#26575136)
> full of digital signals sent in unpredictable

My opinion is digital signals are the very antithesis of "unpredictable", it's always an exact replication. Of course it may look like garbage (and sometimes even intentionally scrambled to garbage for electrical reasons) to the naked eyes without interpretation, but many things are possible after signal processing.

> manufacturer-specific ways

First, there are industrial standards on display interfaces, for example, there are well-defined ways to send a video signal, such as HDMI to the monitor, and LVDS (a specific version of LVDS) from the monitor to the LCD panel. The majority of LCD screens use these standard. Second, even when there's no standard, similar architectures are used across different systems, for example, most LCD drivers on the market are similar to each other. Discovering a way of doing it on a new system is not exactly a surprise.

> and certainly not sequentially enough to leak as recognizable audio.

All you need to do is doing something periodically. Even if the activity you're doing is at low frequency, often it influences some high frequency signals so that a signal can be modulated. As a thought experiment, if you write something to RAM with all 1s and all 0s once every few seconds, it's very reasonable to assume it creates a detectable burst of radiation on the RF spectrum even if the bus itself runs at a higher frequency. In practice it's more subtle and specific from system to system but there's often a way.

For example, it's possible to modulate a computer's memory bus to emit AM audio by accessing the memory in a specific pattern using a few lines of assembly code, whether on a PDP-11 or a MacBook, it's possible to modulate the mechanical vibration of inductor coils on the CPU power circuitry to emit audible music on a Thinkpad by rapidly changing the CPU power state, etc.

There are endless number of ingenious ways of doing it, if you have control over a process.

Re:Van Eck Phreaking by tyingq on Wednesday March 24, 2021 @04:48PM (#26572690)
My guess is that it's leaking in multiple places. Since it's relatively crude by alternating "all black" and "all white" pixels at different "switch rates", it generates recognizable noise in multiple places. That seems to match all the different frequencies you see people reporting to find it. And people finding it regardless of how the signal is getting to the monitor, LVDS, HDMI, VGA, etc.

The "requires a CRT screen" was, I think, referencing the much more fine grained ability to actually recreate what was displayed on a screen. Though that's been replicated for LCDs now also.

Re:Van Eck Phreaking by lippel82 on Wednesday March 24, 2021 @06:48PM (#26574009)
Cheap HDMI cables typically leak image information quite nicely. With the right equipment, it's really easy to get a decent resolution image of the radiation picked up from an HDMI cable even over tens of meters.
Re:Van Eck Phreaking by crtasm on Wednesday March 24, 2021 @08:53PM (#26575206)
Does anyone have a link to a demonstration of this? I'm not sure what keywords I should be searching.
Re:Van Eck Phreaking by segfaultbuserr on Wednesday March 24, 2021 @08:59PM (#26575269)
Keywords: HDMI RF leakage attack. Putting them in a search engine, I was able to find an article about it quickly.

* DVI (HDMI) and DisplayPort digital video interfaces in electromagnetic eavesdropping process

https://sci-hub.se/https://doi.org/10.1109/EMCEurope.2019.88...

You can also search for "side-channel" and "TEMPEST".

---

The signals analyzed below are LVDS and VGA, not exactly HDMI, but also an interesting read - because the LVDS signal is used to drive the LCD panel and it's also a major source of leakage.

* Exposing Computer Monitor Side-Channel Vulnerabilities With TempestSDR

https://hackaday.com/2020/07/15/exposing-computer-monitor-si...

The author of the program even wrote a paper on that for a master degree.

https://raw.githubusercontent.com/martinmarinov/TempestSDR/1...

Re:Van Eck Phreaking by rianmcguire on Thursday March 25, 2021 @01:53AM (#26576954)
Re:Van Eck Phreaking by amelius on Wednesday March 24, 2021 @05:13PM (#26573020)
Isn't EMC testing supposed to uncover this kind of flaw, and what does the FCC say about equipment which leaks like this?
Re:Van Eck Phreaking by tyingq on Wednesday March 24, 2021 @05:22PM (#26573099)
They do, but it would fall under "unintentional radiators", and the measurements are made at some distance from the device. Something like this language:

  Except for Class A digital devices, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values:

  Frequency of emission(MHz) Field strength (microvolts/meter)
  30-88         100
  88-216        150
  216-960       200
  Above 960     500
Re:Van Eck Phreaking by segfaultbuserr on Wednesday March 24, 2021 @09:06PM (#26575322)
For civilian applications, EMC standards and tests primarily ensure the RF leakage is not severe enough to create harmful interference to other devices or users of the RF spectrum, and that your device is robust enough to handle reasonable interference from others. But, it's not designed to eliminate information leakage and protect you from enemy actions. There are specialized (often military) EMC standards that are designed to do this, most famously, TEMPEST by the U.S. government. But you're unlikely to see it in any consumer electronics. Heavy shielding is required.
Re:Van Eck Phreaking by herendin2 on Wednesday March 24, 2021 @11:16PM (#26576203)
>I always thought it requires a CRT screen,

Probably you were right, in the past, because it has become much easier to do this with LCD screens as their resolution has increased into a range which demands fine control of higher-frequency digital data -- high enough (a function of the Nyquist frequency, I guess) to reproduce an analog radio signal with sufficient control to carry a recognizable audio signal

Re:Van Eck Phreaking by px43 on Wednesday March 24, 2021 @08:48PM (#26575170)
I think it's mostly the power draw that's leaking. Timing the pulses with those thick white and black bars is what lets you do it so easily. Pulling individual pixels off the screen would be a much more difficult task.
Re:Van Eck Phreaking by Extigy on Thursday March 25, 2021 @05:49AM (#26578168)
I can hear it without an AM radio! It's very clear but extremely quiet. My machine is muted and I'm trying to work out where in the world the audio is coming from. I wonder if it's just the speakers in this monitor picking up the signal. Or one of my switched mode power supplies that also sometimes whines very quietly in the background.
Re:Van Eck Phreaking by ficklepickle on Thursday March 25, 2021 @01:18PM (#26582838)
I'd imagine it is the speakers in the monitor picking up the signal, with their wires acting as an antenna. AM is cool like that.