News for hackers. Stuff that matters.
Re:Van Eck Phreaking by tyingq on Wednesday March 24, 2021 @04:48PM (#26572690)
My guess is that it's leaking in multiple places. Since it's relatively crude by alternating "all black" and "all white" pixels at different "switch rates", it generates recognizable noise in multiple places. That seems to match all the different frequencies you see people reporting to find it. And people finding it regardless of how the signal is getting to the monitor, LVDS, HDMI, VGA, etc.

The "requires a CRT screen" was, I think, referencing the much more fine grained ability to actually recreate what was displayed on a screen. Though that's been replicated for LCDs now also.

Re:Van Eck Phreaking by lippel82 on Wednesday March 24, 2021 @06:48PM (#26574009)
Cheap HDMI cables typically leak image information quite nicely. With the right equipment, it's really easy to get a decent resolution image of the radiation picked up from an HDMI cable even over tens of meters.
Re:Van Eck Phreaking by crtasm on Wednesday March 24, 2021 @08:53PM (#26575206)
Does anyone have a link to a demonstration of this? I'm not sure what keywords I should be searching.
Re:Van Eck Phreaking by segfaultbuserr on Wednesday March 24, 2021 @08:59PM (#26575269)
Keywords: HDMI RF leakage attack. Putting them in a search engine, I was able to find an article about it quickly.

* DVI (HDMI) and DisplayPort digital video interfaces in electromagnetic eavesdropping process

https://sci-hub.se/https://doi.org/10.1109/EMCEurope.2019.88...

You can also search for "side-channel" and "TEMPEST".

---

The signals analyzed below are LVDS and VGA, not exactly HDMI, but also an interesting read - because the LVDS signal is used to drive the LCD panel and it's also a major source of leakage.

* Exposing Computer Monitor Side-Channel Vulnerabilities With TempestSDR

https://hackaday.com/2020/07/15/exposing-computer-monitor-si...

The author of the program even wrote a paper on that for a master degree.

https://raw.githubusercontent.com/martinmarinov/TempestSDR/1...

Re:Van Eck Phreaking by rianmcguire on Thursday March 25, 2021 @01:53AM (#26576954)
Re:Van Eck Phreaking by amelius on Wednesday March 24, 2021 @05:13PM (#26573020)
Isn't EMC testing supposed to uncover this kind of flaw, and what does the FCC say about equipment which leaks like this?
Re:Van Eck Phreaking by tyingq on Wednesday March 24, 2021 @05:22PM (#26573099)
They do, but it would fall under "unintentional radiators", and the measurements are made at some distance from the device. Something like this language:

  Except for Class A digital devices, the field strength of radiated emissions from unintentional radiators at a distance of 3 meters shall not exceed the following values:

  Frequency of emission(MHz) Field strength (microvolts/meter)
  30-88         100
  88-216        150
  216-960       200
  Above 960     500
Re:Van Eck Phreaking by segfaultbuserr on Wednesday March 24, 2021 @09:06PM (#26575322)
For civilian applications, EMC standards and tests primarily ensure the RF leakage is not severe enough to create harmful interference to other devices or users of the RF spectrum, and that your device is robust enough to handle reasonable interference from others. But, it's not designed to eliminate information leakage and protect you from enemy actions. There are specialized (often military) EMC standards that are designed to do this, most famously, TEMPEST by the U.S. government. But you're unlikely to see it in any consumer electronics. Heavy shielding is required.