Exactly. No reason at all for all of these crazy rituals involving 42 different kinds of oil (2 or 3 of which are made of Unobtanium anyway), ovens, salt, baking soda, owl urine, black cats, graveyard dirt, the Necronomicon, or whatever other weird shit people are throwing out there. Just cook with the darn thing. I don't know why people feel the need to overcomplicate this.
Without sharp corners. You will cut the polymerization layer otherwise, if not careful.
> Don't cook on cold cast iron.
You literally can't cook on cold metal. :)
Dancing water is too hot for some things, IMHO, like eggs. Once it is that hot I'm past the point of good eggs.
I put the oil in and bring it up slowly until the oil runs faster than cold oil, but way, way, way before the smoke point. I like my eggs to have zero brown crisp, so I use low temps and a good olive oil. Also have to use fresh eggs so that the white doesn't spread more the 4-5". On a good day with good eggs if I'm paying attention, I get a perfecty-set white with no brown crisp, and a slow-run yolk with no cooked bits, and after one quick flip to the top to sear the yolk. Perfection.
That is actually slightly misleading due to the Leidenfrost effect.
If I'm doing something that requires a ripping hot pan, one that's actually hot enough for the Leidenfrost effect is where I am for. This usually requires that I use a high smoke point oil, like refined peanut oil.
Do you do any chinese cooking with a carbon steel wok?
For stir frying you generally want things as hot as you can get them. I only have a Teflon wok, and my biggest problem with it is that it just doesn't get hot enough. The other problem is that Teflon really doesn't like very high temperatures, so I'm lucky if a wok lasts a year before bits are peeling off. I've always been put off a carbon steel wok though, because of all the faffing about with seasoning, but reading some of the comments here it might be simpler just to wash and oil it after every use.
At that's the low-point for the effect. I'm not sure that commercial products necessarily all experience that reaction at that temperature.
That's above the smoke point of any oil I could imagine cooking with. While I'm sure you can't discount it entirely, I would not consider it something you would need to worry about unless you were throwing caution to the wind with your cooking process, or perhaps left your stove unattended.
That might sound a lot, but it really only takes a few minutes!
I'll do this every time after using the wok. I expect it to be good for a very long time. There might be easier ways to achieve this, but that's what extensive research has taught me to do.
One tip to add that the cast iron griddle maker gave me in the manual was to avoid putting lots of cold water on it while it's hot. You can wash soon after cooking, but use hot water. Otherwise it can warp.
Talking about additional gotchas: Acidic foods will apparently eat into the seasoning, so one should be careful with those.
Anyway I took the plunge, carbon steel wok and cast iron pan are on their way. At least if I ruin them I can get a do-over unlike non-stick!
That said, I don't know that I'd recommend it to anyone as we rarely use it.
I read somewhere that unless you have a commercial-grade gas range, you are unlikely to hit the temperatures needed to really properly cook with a thinner metal wok. Cast iron is supposed to be a bit of a compromise because it can hold the heat better, but you can't toss it around the way you would with a normal wok.
As to carbon steel, I'd say go for it. I think you'll find it a lot less fussy than you have been told.
Also, I'd say stir fry definitely qualifies under the "something specific" where you would want to use the high heat settings on the stove.
[0] https://www.lodgecastiron.com/product/cast-iron-wok?sku=P14W...
but you summation is pretty much correct, a wok is useless for most home ranges. The heat has to be directed up the walls of the wok for it to cook correctly.
We do our stir-frying on a regular 14 in carbon steel wok, nothing fancy. It does take a bit more oomph than most American gas stoves provide, but we've had good results by ponying up for a Bluestar range [0] which outputs 25K BTU/h ... well short of what you see in Chinese restaurants, but on par with Western commercial stoves.
Actual Asian households don't generally cook on fancy restaurant stoves, and yet somehow manage to stir-fry satisfactorily. The trick is they use propane, which has about twice the energy density of natural gas. So it's a lot more effective (and cost-effective) to use a turkey fryer/crab boil burner to do your stir-frying, if you can swing it.
[0] https://www.bluestarcooking.com/cooking/rangetops/36-platinu...
The advantage of cast iron is that you just cook on it and over time (if it isn't already seasoned) it seasons itself. That's all there has to be to it... fussing over how you season it and then throwing whatever food in there seems a little silly.
I cook a great deal and once in a while it's time to scrape down (often because I made a big mess in the pan) the cast iron pan and 'start over'.
My starting over just means ... I clean it thoroughly, oil it a bit when I cook on it the next time. That's it. Pretty quickly it will be plenty seasoned.
If folks want to take a deep dive into seasoning their cast iron pan in a complicated fashion, awesome, but it's really not necessarily.
When oiling the pans take the time to try to wipe out all the oil you applied. This leaves just a tiny layer of oil and your pans won't get sticky. I clean with diluted Dawn and a sponge - dry on burner - then oil / wipe out each use.
I don't see the point to the perfect coating; occasionally using it in the oven already gets you to the perfect slick season.
Ill try the water test next time
So I went and washed my skillet down to a matte surface, rubbed oil into it, and cooked an egg. Worked perfectly fine.
You won't ever get the "slippery" coating like with a teflon pan, but I also find cooking on that type of surface to be absolutely maddening since any time you try to chop or scoop in such a pan, the food just slides out from under you and you have to chase it about.
I want my food to "not stick" in the same way that a book doesn't stick to a table. I don't want an ice rink.
Many, if not most, pans today come preseason-ed. And they do it exactly like in the article: a very hot oven and oil with a high smoke point.
It's probably got "seasoning" on it, but it also is not at all "seasoned" in the sense that for example this article or the person I was replying to is meaning.
Granted, if you still use soap that warrants the use of heavy plastic gloves, probably a bit easier.
Cook with it. Use oil / fat.
Honestly, cast iron is about the most forgiving cooking surface you will find. People love to make it more difficult than it is.
Edit:
Some additional tips on cast iron:
Setting 4 / 10 (slightly below medium) is the default heat setting, and you have to really have something specific in mind to ever go above 5. I find that people who are used to teflon pans like to go up into the medium-high range. Things don't end well up there with cast iron.
Also buy a metal spatula. You aren't going to hurt anything, and it will be a more satisfying cooking experience. Plastic + cast iron is just going to leave you with a melted spatula. There used to be a ubiquitous metal spatula design, but I can never find them anymore. I've found it is much better to use something small like a cake / bar server than something big like a grilling spatula.
Don't cook on cold cast iron. The trick my mom showed me is you always wait until a splash of water (get your fingers wet and flick it on the pan) will start boiling on contact. If it boils into nothing immediately, you are too hot. If it just sits there and does nothing, you aren't hot enough yet.