News for hackers. Stuff that matters.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by owenwil on Monday November 16, 2020 @12:37PM (#25114532)
I had this happen to me on a late 2019 MacBook Pro as well, but dramatically worse: the machine was totally unresponsive, no chimes, no power up, nothing. I tried everything, including the usual PRAM clear and whatever else, but Apple suggested a replacement machine.

Since I can’t work because I’m waiting for the replacement, I started tinkering to see what I could do and it turns out that the T2 security chip was totally nuked – the weird version of iOS it runs (BridgeOS) was broken/missing, which means the hardware won’t even power on, POST, or light up the screen to tell you. Without the T2, you don’t have a computer anymore, basically.

Turns out that this chip can be flashed by using a specific set of incantations: https://support.apple.com/en-ca/guide/apple-configurator-2/a...

So, here’s what I had to do:

1. You need another Mac running the exact same build of the OS on the dead machine. I begrudgingly needed to update my Mac Mini to Big Sur to get it to work.

2. Plug a USB-C cable into the front left port of your dead MacBook, fire up Apple configurator on the functional machine and click “Revive.”

3. Wait, hope it works.... but there’s no confirmation so you just have to wait a long time and hope it was long enough, then hold the power button for 30 seconds to see if it’ll turn on.

4. If that doesn’t work (it didn’t), then you should run “restore” which is exactly the same. Wait a long time, hold the power button for 30 seconds and hope. Eventually, in my case, it powered up into internet recovery, and acted as if it were a new Mac. Everything is gone, but it’s at least functional as far as I can tell.

This will ONLY apply to the T2 models, which are not the ones mentioned in the OP, but it seems like a similar issues. These steps at least revived my machine, but it was so obscure that even Apple support didn’t know about this, so ordered a replacement. I can’t be the only one to have run into this, but I’m pretty pissed that I blew two entire days trying to figure out what was going on.

More details on my Twitter: https://twitter.com/ow/status/1328389544119513089?s=21

Re:Black Screen After MacBook Pro Update to macOS Big Sur by tacheiordache on Monday November 16, 2020 @12:48PM (#25114684)
Im surprised at what lengths people go to sustain their attachment to their macs and apple. It used to be it just works, i don't have time to tinker. Now you have to get your hands dirty for no particular reason other than apple wants to revamp everything in order to secure a new milkcow for the next generation. Come back to linux!
Re:Black Screen After MacBook Pro Update to macOS Big Sur by bayindirh on Monday November 16, 2020 @01:44PM (#25115377)
As a regular mac and Linux user (I use Linux 80% of the time), I can clearly say it's not about sustaining an attachment.

If I had time, I'd do the same. I'm in this career because I wondered how these things work in the first place. Just because Windows or macOS are closed systems they're not less interesting. They're harder to understand and, sometimes challenge calls.

Linux is nice, way better when compared to 15 years ago but, it's not perfect. I'm going to buy a new PC in 12 months and I'd need to make some research about hardware compatibility and performance. Especially on the motherboard side. I have to make sure that it contains no funny devices or memory mappings so, I can't use an on-board peripheral until someone writes a quirk just for that.

OTOH, every platform has its nice applications. While Darktable is a very nice photo editor and Digikam is a perfect DAM, CameraBag or OmniGraffle doesn't work on Linux. Similarly, many basic functions of KDE's Dolphin (Protocol support, embedded git, etc.) is not present on mac. Similarly my IDE of choice (Eclipse) wasn't working well on macs until Big Sur.

However, while developing applications, Apple's design decisions and inner workings provide some nice insight and inspiration for better experiences and more sensible defaults.

Using diverse set of platforms is mind opening for me. It's important to understand the trade-offs of every one and, all of them are perfect in their own regard.

However, at the end of the day, I'm a FOSS lover and you can't pry my Linux systems from my cold dead hands. macOS on the other hand is just a nice closed system to develop open source stuff for me.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Qerub on Monday November 16, 2020 @02:32PM (#25115969)
> I'm going to buy a new PC in 12 months and I'd need to make some research about hardware compatibility and performance. Especially on the motherboard side. I have to make sure that it contains no funny devices or memory mappings so, I can't use an on-board peripheral until someone writes a quirk just for that.

There are certified/tested Linux computers available from vendors like HP and Dell. Just buy one of them instead of wasting time researching hardware compatibility only for it to break later with no one to complain to. Some links:

HP Linux Hardware Matrix: https://h20195.www2.hp.com/v2/getpdf.aspx/4AA7-6280ENW.pdf Dell Linux Workstations and Laptops: https://www.dell.com/en-us/work/shop/overview/cp/linuxsystem... Ubuntu Desktop Certified Hardware: https://certification.ubuntu.com/desktop Red Hat Certified Workstations (incl. Laptops): https://catalog.redhat.com/hardware/workstations/search

Re:Black Screen After MacBook Pro Update to macOS Big Sur by spijdar on Monday November 16, 2020 @05:13PM (#25117722)
This isn't always as straightforward as it might seem. I'm using a Dell Precision laptop shipped with Ubuntu and certified and all that jazz, and it continues to have problems that just don't happen on the Mac side of things. I use both, a "low-end" MBP for "thick client" computing and the Dell as a luggable hypervisor, since I don't have the money to spec a mac out with the kind of specs I need for that.

Even with a recent kernel, it continues to have power management problems, and the intel wifi chipset occasionally just decides to stop working. It's fine, especially given the good price I got, but it's been a hassle, and more than occasionally I wish I'd spent the money on upgrades to the Mac instead.

(And I say this as someone with a libre POWER9 desktop and a pinephone -- I love tinkering and live Linux, but when I'm working for a paycheck I get tired of dealing with Linux's issues)

Re:Black Screen After MacBook Pro Update to macOS Big Sur by bayindirh on Monday November 16, 2020 @02:51PM (#25116179)
Thanks for your answer. I'm aware of these systems (my office workstation is an EliteDesk) however, these systems are not suitable for me for various reasons.

I make staggered updates and these systems are not very receptive for that. I wouldn't want to change my case just to upgrade the motherboard and the CPU. Also, I'm not sure that a small EliteDesk tower can accommodate all my disks (2HDDs plus 2SSDs) neither space, nor power-wise. I also use a PCIe sound card (for sound quality reasons) which needs a PSU connection via floppy connector.

At the end of the day, these systems are very nice as-is, but I need to get them as a package and they're not very flexible. My desktop usage scenario and update path is not very suitable for that.

Last but, not the least; I like to build my own desktop computers.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by coldpie on Monday November 16, 2020 @02:45PM (#25116107)
> Linux is nice, way better when compared to 15 years ago but, it's not perfect. I'm going to buy a new PC in 12 months and I'd need to make some research about hardware compatibility and performance. Especially on the motherboard side.

I've been using Linux exclusively since 2007 and I've never had any motherboard compatibility issues. I think the only thing that may be shaky is wifi, but even that's pretty settled these days now that the hardware is more or less standardized. I'm not doubting your experience, just found that an odd thing to single out.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by bayindirh on Monday November 16, 2020 @03:03PM (#25116322)
By 2007, most of the nasty stuff has been sorted out (I met with Linux in 1998, started to use it full time by 2003).

Some things I have experienced (not all hardware related but, notable and crippling):

  - Additional SATA controllers had intermittent connectivity issues with Samsung SpinPoint drives
  - Same additional SATA controllers' 2 port models were fine but, same chip's 4 port model was not recognized at all.
  - Intel Speedstep was wonky.
  - CPUFreqd needed hand tuned scaling profiles for good on-demand scaling.
  - Fedora 4 mysteriously tried to redirect all my internal X11 comm via my physical Ethernet card. Needed to add an additional card as a primary network interface to solve desktop latency problems.
  - One of my systems was unable to boot any OS installed on the non-GRUB drive. GRUB was unable to fire anything on that disk (regardless of OS brand, model and make)
  - My latest system's on board Wi-Fi and BT adapter was unusable for 2 years.
I possibly had many more small problems and I either worked around that or a BIOS update came to remedy that to my luck. 18 years is a long time. :)
Re:Black Screen After MacBook Pro Update to macOS Big Sur by von_neumann on Monday November 16, 2020 @05:22PM (#25117835)
I'm typing this using Linux on a MSI B550 MB I built a few months back. The network and sound drivers did not work out of the box on any version of Linux I tried. Ubuntu install process would not even complete. Pop! did come up, but no sound or network. I borrowed an old USB network adapter and was able to get most everything working once I had access to the internet.

The sound still breaks after every kernel update though as the drivers continue to evolve. I've been running Linux on my desktop for twenty years now, and I couldn't suggest anyone who hasn't to try a Linux on a next-gen motherboard as it is pretty much always a disaster for a year or two.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by sfifs on Monday November 16, 2020 @06:36PM (#25118503)
Unless you're developing explicitly for iPhone, Windows + WSL may be a good option. I used it at work and then also switched my personal ThinkPad from Ubuntu to Windows + WSL2. You get far more hardware configuration options in the high end (including the ability to run CUDA code directly on your laptop if you're so inclined - useful for development)
Re:Black Screen After MacBook Pro Update to macOS Big Sur by newsbinator on Monday November 16, 2020 @01:09PM (#25114969)
The reason I left Linux was having to spend days on incantations to make my sound card or network adapter work.

I got tired of having to figure out what codec incantations I needed to make videos play.

Much of the support was snarky "RTFM" or forum postings from 2007 about different distros.

Every couple years I try it again when people on HN insist it's better now, and within minutes there's a showstopper hardware compatibility issue or something.

I'm scheduled to try it again about a year from now.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jlokier on Monday November 16, 2020 @01:31PM (#25115226)
I'm a huge Linux fan and used Linux natively on several laptops for nearly 20 years.

Even with all that experience and care picking good laptops, and even after Ubuntu and Xorg autoconfig made the driver situation much better, I found myself having to: Fix kernel graphics driver bugs (spans of random pixels occasionally drawn on the screen due to something extremely subtle deep in the Intel driver), sound driver bugs, and being annoyed that nothing worked right with Nvidia on one of them (neither Nvidia's driver nor Nouveau worked properly), and debugging unreliable suspend.

Now I run Linux in a VM, and that's been perfect for userspace development. On a Mac, the four-finger swipe switches beautifully between Mac and Linux full-screen desktops, as if neither OS is really in charge. It feels more like running Xen, two OSes side by side, with Apple-quality GUI for switching and organising OSes.

Of course, not so good when the Apple device bricks.

The symptoms people are reporting now are very similar to what I saw when upgrading to Catalina - hours stuck on "about a minute remaining", many reboots and with what looked like glitchy display errors and "starting from scratch" progress bars, leading to a worrying feeling it was stuck in a reboot cycle or just bricked. I was immensely relieved when it eventually finished after hours of doing whatever it was doing, as I didn't have a spare working computer (all my old Linux laptops have broken :-/) And that was after leaving it for nearly a year (I installed Catalina this summer), so the problems should have been "ironed out" by then.

I'm really glad I haven't follow the system notification's prompt to update to Big Sur. From the Catalina experience, I suspect I'd be one of the brickage victims, and I can't afford that right now.

If it were always possible to restore from backup (as it generally is with Linux and Windows) that would be fine, I'd take the risk. But when Apple updates go wrong, it can be more serious as you can't necessarily boot at all, even to restore from backup.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by ianai on Monday November 16, 2020 @02:06PM (#25115636)
What virtualization are you using to swipe like that between Linux and Mac?
Re:Black Screen After MacBook Pro Update to macOS Big Sur by jlokier on Monday November 16, 2020 @02:13PM (#25115727)
VMware Fusion (now changed name to VMware Player).

But I would expect it to work the same for other virtualisation software, because that's what MacOS does for full-screen apps.

It's nice that the swipe gesture is intercepted by the host instead of passed to the guest.

I swipe to full-screen remote desktops too (in this case to access another work laptop on my desk via my main monitor), it's really nice having them all available this way. It's like having a deluxe KVM, which also has a zoom-out thumbnail viewer when needed :-)

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Qerub on Monday November 16, 2020 @02:35PM (#25115997)
> VMware Fusion (now changed name to VMware Player).

It's still called VMware Fusion but is now available in the variants Player and Pro: https://www.vmware.com/se/products/fusion/fusion-evaluation....

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Qerub on Monday November 16, 2020 @02:39PM (#25116041)
I used to work this way too but get fed up with keyboard and mouse buttons getting stuck in VMs making them go bananas when the system was under load. Really nice experience apart from that and the half-broken support for Retina displays.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by bayindirh on Monday November 16, 2020 @02:09PM (#25115682)
Possibly VMWare Fusion Pro, since I do the same on my mac.

Fullscreen the Linux VM, it becomes another desktop. Just swipe into it and continue working.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by binarymax on Monday November 16, 2020 @01:47PM (#25115417)
Same. I've been trying to use Ubuntu full time since 2010. These days I run a (toy) deep learning rig in my cool basement that has Ubuntu. I've gone through 4 (FOUR!) different hardware attempts at wifi trying to get higher than 1Mbps to the router: 2 different internal cards, and 2 different external sticks. I spent a good 2 to 3 hours of incantations for each of those 4 options. I finally gave up and bought a $50 wifi extender that has ethernet out, which finally worked and am now getting 5g speeds to the router.

Before that it was an issue with different GPU/CUDA binaries causing conflicts and forcing a full reinstall of the system at random times when I was swapping conda envs for different python stacks.

I really really really want to be able to use Linux full time, but I haven't even got to the point of wanting to use something like video conference from a linux install, which I've heard is a nightmare.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by harha on Monday November 16, 2020 @02:07PM (#25115656)
I’ve gone to using cables wherever I can. Depending on the wiring a power line network adaptor might speed up things substantially.

That being said, setting up WiFi is a pain, I frequently set up raspberry pis with Ubuntu and just can’t get it right without needing to connect a screen.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by lisnake on Monday November 16, 2020 @02:24PM (#25115873)
Managing CUDA install on Windows is a big PITA too
Re:Black Screen After MacBook Pro Update to macOS Big Sur by addicted on Monday November 16, 2020 @01:38PM (#25115302)
With Lenovo, Dell and HP all supporting official Linux models, I suspect this should be less of an issue now at least if you buy a supported model.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by vmchale on Monday November 16, 2020 @03:10PM (#25116416)
Hardware is still bad, inferior to Windows.

With Catalina, my Mac speakers intermittently stopped working though. So it's getting more competitive as Mac gets worse.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jlokier on Monday November 16, 2020 @01:09PM (#25114975)
There's a pretty strong motivation:

> Since I can’t work because I’m waiting for the replacement

There's probably a few tens of thousands of stressed out freelancers right now who can't pay their rent this month because their only machine just got bricked by the Big Sur update (which presents itself via system notifications as if it's an ordinary software update, not a major event), and they are either stuck far from any Apple service waiting for a replacement, or worse, it's out of warranty and they can't afford to buy another machine.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by TwoNineA on Monday November 16, 2020 @03:41PM (#25116745)
> There's probably a few tens of thousands of stressed out freelancers right now who can't pay their rent this month because their only machine just got bricked by the Big Sur update

I opened my late 2013 MBP, unplugged the IO board's cable, rebooted, OS finished upgrading. I left it unplugged for now (lost WiFi/BT, HDMI and one USB) not an issue for me, was using TB to displayport and gigabit lan adapter anyways. System works and reboots fine without IO board being plugged in. Ordered a 14$ replacement board from eBay.

Do steps 17 and 18 of this:

https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Retina+Disp...

Re:Black Screen After MacBook Pro Update to macOS Big Sur by blazor on Monday November 16, 2020 @01:11PM (#25114991)
Wonder if that will be enough to make them consider switching away from Apple? Silly question!
Re:Black Screen After MacBook Pro Update to macOS Big Sur by jnwatson on Monday November 16, 2020 @01:22PM (#25115111)
I'm not a huge Apple fan at this point, but implying that other platforms don't have this problem is somewhat disingenuous.

Updates brick device across many platforms all the times. I've had plenty of PCs break from updates.

That you can even recover from a T2 failure at all without opening it up is quite nice. Perhaps my standards are low.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by SahAssar on Monday November 16, 2020 @01:36PM (#25115281)
Not many other general purpose computers require another computer to fix.

Most windows and linux machines can be reinstalled with a USB stick. If you don't have that USB stick they can usually be written with any macos, windows or linux machine.

Updates do not usually brick machines. I'm guessing your PCs that broke did not require another PC running the exact same windows version to fix? And I'm guessing that if those PCs were made within the last 5-10 years you could restore from recovery and not need another device?

Re:Black Screen After MacBook Pro Update to macOS Big Sur by at-fates-hands on Monday November 16, 2020 @02:08PM (#25115669)
> Updates brick device across many platforms all the times.

A few weeks ago, I fired up Adobe Photoshop from their CC platform. No go, something, something about an intel compatibility.

Do online and start googling the error I was getting.

Seems the newest version determined that my quad core Xeon processors didn't support SSE 4.2 or later. A LOT of people were fuming online that in order to run the latest version, they would have to get a new PC or laptop with a new processor that was now required for the newest version.

The current solution for many is to now install an earlier version until they figure out what they want to do. Ironically, I still run a lot of stuff on my old Mac Mini so I found out that I can run the most recent version of Photoshop on there instead.

I haven't checked into the issue for a week or so. I'm still not sure if anybody came up with a solid solution without having to buy new equipment.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Bqhatevwr on Monday November 16, 2020 @04:54PM (#25117469)
> Seems the newest version determined that my quad core Xeon processors didn't support SSE 4.2 or later. A LOT of people were fuming online that in order to run the latest version, they would have to get a new PC or laptop with a new processor that was now required for the newest version.

I was with you until I looked up when SSE 4.2 was introduced.

SSE 4.2 was introduced in the Nehalem architecture...twelve years ago for desktop processors, ten for xeons. I really don't see anything wrong with Adobe requiring a processor newer than ten years old for software used by and large by creative professionals, people who make money with it.

If you're a creative professional working off a twelve year old computer, you're wasting money just from lost productivity waiting on that system - as well as flushing money down the drain on all the wasted energy running the system, unless you live somewhere electricity is insanely cheap.

A new computer would literally pay for itself in reduced power consumption alone, both idle and loaded wattage. A Ryzen 3600 uses less than half the power of a lot of xeon chips, has a single-core performance 50%+ higher than the very fastest second-gen quad core nehalem, and has two more cores.

Same goes for a modern GPU - everything is GPU accelerated these days, and you can get a several year old Nvidia card that is so power efficient the fans aren't even spinning most of the time.

Then there's the huge performance boost of NVMe.

The list goes on. Dude(tte). Buy a new computer. Or one at least made in the last 5-6 years?

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Kwpolska on Monday November 16, 2020 @03:47PM (#25116803)
Can a Windows update brick a PC? I’m pretty sure it can’t, because it does not update the firmware of the main system controller. You might end up with an unbootable copy of Windows if you’re unlucky, but it’s fairly easy to fix it with install media or a recovery partition, and you might be able to recover any data your backups don’t cover (you make backups, right?). If you don’t have any install/live media for Windows or Linux, it’s trivial to make those with any working computer (Linux, Windows, macOS), including a friend’s. But if a macOS update nukes your T2 chip’s firmware, you need access to another Mac and the appropriate cables.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by jimmaswell on Monday November 16, 2020 @01:29PM (#25115194)
We shouldn't applaud that it turned out to be possible to fix this thing after grueling effort (and the company trying to push purchasing a replacement) when the security chip was an unnecessary user-hostile blight in the first place.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by jlokier on Monday November 16, 2020 @01:13PM (#25115000)
If they can't afford another machine, then not until the current one stops working. Ironically!

But for a lot of developers, their work literally can only be done on on Apple devices. You can't develop iOS and Mac apps on anything else.

There are a lot of people for whom that is their job, including freelancers.

They could switch to a new domain of business, but that's a large change with many disadvantages. It's not like picking a different laptop just because you fancy a change. E.g. for an iOS developer to switch to being an Android developer, it's not hard to start but there's a lot to learn to be good at it to the same level and bring in the same money.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by beagle3 on Monday November 16, 2020 @01:53PM (#25115484)
Thats a very weird example. Those developers should know better than update on the first week of a new OS on their only non-virtualized machine.

I would be surprised if my accountant updates to a new version of Excel within 3 days if it coming out, and would be very disappointed if as a result he wasn’t able to prepare my taxes. The situation you described is similar - someone who should know better throwing their old tools before they know for sure the shiny new one will work.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jlokier on Monday November 16, 2020 @02:23PM (#25115852)
The system notifies you about software updates from time to time, and you are trained to install them for security.

The Big Sur update is notified in the same way. It gives the appearance of being just another big software update.

Unlike Windows, Mac OS updates come out more often, about once a year for major version, and every couple of months for minor version. Despite the marketing fanfare, they are not as big a change as say jumping from Windows 7 to Windows 10.

Ok, maybe you still want to take care with a new OS. Like with Excel three days before filing taxes. (Though when do you expect the accountant to upgrade? They are always doing someone's taxes.)

Maybe you do try it in a VM first, and decide you like it, it works well for you. Some people try new OS versions in a separate partition. You can do that on a Mac, just like on a PC. It seems like it ought to be safe, because you've kept the old installation on as well. Just like on a PC, you can choose which to start up using the built-in boot menu.

Being sensible you take a full system backup first. Usually, with Apple, a backup is pretty good. You can reinstall from a backup provided the system can boot. Macs have a reinstaller built in. By analogy with a PC, it's more like "imaging" a Windows or Linux system, and as if the PC BIOS had built-in tools to restore from a backup image.

Following that analogy, the problem here is that Big Sur nuked the BIOS! It can't even reboot from external media, or the recovery partition. If a Window OS upgrade did that we'd not only be unhappy, we would also be rather surprised that we can't boot an external USB key to recover.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Kwpolska on Monday November 16, 2020 @04:07PM (#25117001)
> Unlike Windows, Mac OS updates come out more often, about once a year for major version, and every couple of months for minor version. Despite the marketing fanfare, they are not as big a change as say jumping from Windows 7 to Windows 10.

Windows 10 has new major releases every 6 months, changes might be more minor than a typical macOS major release. Windows also gets security patches and bug fixes every month, those are comparable to macOS minor versions.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by dstick on Monday November 16, 2020 @01:03PM (#25114902)
You are spot on. The big advantage Apple had is slowly fading away: quality control. First the keyboards, now this.

As a freelance developer, my MacBook Pro is my livelihood. It’s dependence, great support and MacOS / Linux CLI was it’s main feature. Now it’s gotten to the point where you’re better off waiting 4 years before buying a new product line so the general public beta tested it long enough.

I’m getting a lot of Microsoft in the 90’s vibes from Apple these days. Anyone else as well?

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jeromenerf on Monday November 16, 2020 @01:41PM (#25115323)
Being dependent on one device, as a professional? Backups, spares and insurance are not best practices, they are the basic cost of doing business. Using the latest version (not the security updates of course) of anything on a production machine has always been a bad idea.

We need a new razor, something along the lines of "do not attribute to FANG marketing what is better explained by misplaced expectations".

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jlokier on Monday November 16, 2020 @02:00PM (#25115569)
> spares [...] are not best practices, they are the basic cost of doing business

I think you overestimate some professional people's income (especially if it's sporadic) and underestimate their other expenses.

I've known many freelancers who buy a new laptop twice a decade at most. It will be the single most valuable object they own, and may be the result of saving for months and careful consideration of what to buy, intending it to use it for many years.

A spare good laptop "just in case" is not a realistic option for them.

Most of them could buy a second laptop if circumstances arise where it's absolutely necessary, but it would be hardship. So they wouldn't get one just as a "nice to have", a spare laptop lying around doing "nothing". Especially if it's going to be outdated by the time you have some use for it. Events where you need a spare device are quite rare after all.

That might be below "the basic cost" of running a sensible business, but for people on median and/or sporadic incomes it's a significant cost, only worth bearing if and when it becomes necessary.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jeromenerf on Monday November 16, 2020 @08:07PM (#25119222)
Nothing worth having comes easy?

I don’t mean to belittle anyone’s hardships, the stress of failing in particular. Being a "pro" is not amateur work.

Except for the obvious extreme scenarios, if your business collapses when your laptop fails, I think you are at fault, not Apple.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by spronkey on Saturday November 21, 2020 @05:58PM (#25173387)
I don't like your attitude here, because ultimately its harder and more expensive to mitigate against these types of failure than it has been in the past.

First, on Apple devices there are more software-induced failure modes than there had been in the past, and many of these failure modes are far more difficult or obscure to recover from. An OS update bricking your system in a way that Time Machine (or a disk image or similar) couldn't recover from was incredibly rare until rather recently.

Second, Apple devices have become so integrated and locked down it's now impossible to use some of the historical strategies to get yourself back up and running faster in the event of an unexpected failure. For example, you can no longer take the drive out of your current device and stick it in a replacement device to continue working. You've gotta make sure you have a perfectly working backup system to do that now, and even that takes waaay more time then the old-school drive swap. We're still not at the point where it's easy to shift your entire life from one machine to the next unless everything you do is cloud-based (which isn't the case for most).

Third, Apple's devices in particular have become harder to repair. They have more proprietary features than they did in the past, and a less friendly attitude towards repair than in the past. Apple don't release detailed documentation or repair manuals on how to e.g. revive the T2 chip, and AFAICT some of the tools needed to diagnose and repair Apple devices are internal only. It's now also impossible for all but an SMD repair shop to replace certain components if they fail because they are now soldered to the logic board. This, combined with the turnaround time for repairs on Apple products being ridiculous, has put even more pressure on people to have more robust backup plans than before, and penalises those without these plans moreso than in the past.

Forth, Apple's devices have become more expensive in the first place - or at least, there are now fewer options for folks to get the machines they need from third parties via upgrades. I typically work in smaller businesses and with freelancers and contractors, and many of these folk used to buy lower end models and upgrade the components over time as their needs improved and components got cheaper.

With soldered storage these days it can also be more difficult to find a suitable machine to buy e.g. used while you wait for your main machine to be repaired. Need a 1TB device? In the past, you could pick up any used machine on the market of approximately the specs you need, and simply swap in aftermarket storage. Now? Well, you're limited to the tiny portion of Macs originally sold with 1TB drives. There may be some way to use an external drive for this, but damned if I can find instructions on how to do so on Apple's website. What I can see however is a disclaimer that Macs with a T2 chip might be more difficult to use external startup disks with. I'm sure I could figure it out eventually, but I'm pretty sure your average freelancer would struggle.

So while ultimately yes, you as a professional can do things to mitigate the circumstances of any single point of failure and should do so where it makes sense, from where I sit this is an increasingly difficult and time consuming process. And all of that extra difficulty has been forced upon its customers by Apple.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by pcdoodle on Monday November 16, 2020 @02:02PM (#25115592)
At least with microsoft we could compile and exe and have it work 20 years later...
Re:Black Screen After MacBook Pro Update to macOS Big Sur by coldtea on Monday November 16, 2020 @12:57PM (#25114817)
>Im surprised at what lengths people go to sustain their attachment to their macs and apple.

Probably because going to these lengths is rare, and people will just service/replace the ocassional problematic machine.

Whereas in Linux land this is much more common, and you're on your own commercial support wise (and with friendly forums to guide you).

Re:Black Screen After MacBook Pro Update to macOS Big Sur by owenwil on Monday November 16, 2020 @03:11PM (#25116426)
I wouldn't call dealing with this sort of thing on every other update rare.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by coldtea on Tuesday November 17, 2020 @05:06AM (#25121969)
I wouldn't call dealing with this sort of thing on every other update anything but rare. And I've been using Macs since 2003 (along with Linux, Windows, etc).

It's the effect of:

(1) millions of Macs updating at the same time (fastest OS updates in the industry) vs a smaller number of Linux users scattered upon every distro and updating at random piecemeal intervals (and Windows users fragmented into 2000000 possible configurations and OEMS, with different pain points and issues, that nobody cares for, and is not newsworthy, plus the blame can be dilluted between MS and the PC vendor.).

(2) Apple doing bolder changes with releases than Windows or Linux does (adopting new things faster, custom processors and co-processors and SOCs, whole new languages, new filesystems, etc), so risking more problems.

(3) Apple news sell (few would care for "Asus botched the production run of one of its 200 models"), so they magnify the issues that 1000 or 10,000 people see as if they concern 100,000,000+ users (or half a billion in the case of iOS).

(4) Hackers and tinkerers being angry that they're not pandered by Apple, as if they ever were the target group for Macs, and as if curation and the concept of the walled garden is not central to macOS/iOS (in the positive light: not "I can't get off the garden" but "it's a peaceful garden where I can focus on X things, creeps, crazy people, junkies, etc don't get to screw around -- and yes, this means that to achieve that I can't do any arbitrary thing I might want either").

Re:Black Screen After MacBook Pro Update to macOS Big Sur by spronkey on Saturday November 21, 2020 @06:09PM (#25173437)
I'm seeing more and more this sentiment about "not being the target group", and using it to justify crappy business decisions.

Around the PPC change, Apple took the grand strategy of backing away from this idea of controlling what their users were able to do with their machines. Now they're moving back to their "we say what our machines are for and if your use case doesn't match then screw you" attitude.

Many of Apple's business decisions of late have been nothing but hostile to the idea of allowing users to do what they want with their devices. As a very long time Mac OS user, this whole idea of a "walled garden" was never central to the Mac, and while Apple have always been a sufferer of NIH syndrome, it seemed in the mid-2000s that they had finally got over this and started playing nice with the rest of the industry. So much for that.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by acdha on Monday November 16, 2020 @03:58PM (#25116921)
They don’t happen on every other update, or even every tenth update. You’re hearing from a small self-selected population of users who had undiagnosed hardware issues, dodgy power, hacked up system config, etc. and generalizing it to the vast majority of users who clicked install and resumed working 20 minutes later.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by kalleboo on Monday November 16, 2020 @10:50PM (#25120090)
I've been using Macs for 29 years, only one update has gone bad (El Capitan after updating, the boot would never complete. I restored from Time Machine, and did a clean install, then it worked fine). Hardly "every other update". Meanwhile I've hosed so many Linux installs by somehow getting mismatched package versions
Re:Black Screen After MacBook Pro Update to macOS Big Sur by kache_ on Monday November 16, 2020 @01:02PM (#25114888)
At least with Linux you can actually fix it
Re:Black Screen After MacBook Pro Update to macOS Big Sur by coldtea on Monday November 16, 2020 @01:06PM (#25114944)
If you know how, have time, don't have an opportunity cost/better things....
Re:Black Screen After MacBook Pro Update to macOS Big Sur by 10000truths on Monday November 16, 2020 @01:26PM (#25115167)
There's also a pretty big opportunity/time/effort cost to contacting Apple support, describing your problem, fighting with them over whether the defect is covered under warranty, actually packaging the thing and shipping it to them, waiting for the fix/replacement, hoping the replacement isn't similarly screwed up, and setting up all your programs and files again when they 'fix' the problem by wiping your machine or giving you a new one.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by vladvasiliu on Monday November 16, 2020 @02:04PM (#25115617)
That's correct, but as a parent said, this kind of issue is very rare. I can't actually remember another mac os upgrade actually bricking machines. I may be wrong, though.

What's way more common is random hardware failures, unrelated to the OS. I've never had to deal with apple support and hope I'll never have to, but HP enterprise support isn't frictionless either. A colleague of mine had a swollen battery, which wasn't user replaceable (guess not only Apple has bright ideas). He called up the support, which went relatively fine but in the end he had to send the computer in for repairs for two weeks and was advised to save his data as the machine would be wiped. Luckily removing the SSD was possible and didn't void the warranty...

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Symbiote on Monday November 16, 2020 @03:39PM (#25116718)
In my experience, "Not user replaceable" on enterprise laptops means a few normal screws release the back cover to get access to the battery.

The next business day, on-site support presumably costs extra. (We have it for servers, but I don't deal with laptops until they're out of warranty.)

Re:Black Screen After MacBook Pro Update to macOS Big Sur by abawany on Monday November 16, 2020 @04:50PM (#25117426)
I'm sad to say my experiences with Apple support for my work laptops have been palpably worse than my dealings with my state's DMV (to use the stereotype of 'bad customer service'). I am currently stuck waiting for a screen replacement for a 6 month old 16" MBP (something that was promised in 3 days but I found today, after 4 calls and as many answers, that it might be ready this week); I'm using a 4+ year old MBP in the meantime - the latter needs a battery replacement but my numerous encounters with Apple support/Store have made me generally allergic to dealing with them. If there's a magical Apple cs experience that exists, it certainly has eluded me every time. Edit0: syntax.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by medium_burrito on Monday November 16, 2020 @01:22PM (#25115107)
And if I had endless time, presumably I could reach englightenment, with seems like a better use of my time.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by unethical_ban on Monday November 16, 2020 @01:55PM (#25115501)
You're saying people should avoid tinkering by going from Apple to "Linux", let's assume a desktop, well documented OS with binary package management like Fedora or Ubuntu.

First, this isn't happening to all updates. Second, On a daily basis, Apple stores/support are widely available and with pretty good warranty coverage. Third, the quality of hardware/user experience for the average, non-technical computer user is on a different plane of existence when comparing Apple to non-apple laptops. Screen resolution and the companion software support, battery life, weight, and trackpad are completely unmatched in the non-apple world.

I play games and have used Windows, BSD and Ubuntu as my main drivers at different times over the past 20 years. My Thinkpad is currently on Ubuntu 20.04. My career is IT/Infosec.

I don't even use my laptop most days, but I'm tempted by an M1 air because the UX and value is amazing.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by Kwpolska on Monday November 16, 2020 @08:11PM (#25119239)
> Screen resolution and the companion software support, battery life, weight, and trackpad are completely unmatched in the non-apple world.

Dell’s XPS line can beat or match Intel MacBook Pros in those regards.

XPS 13 9310 (2020): 1200p (base, touch optional) or 2400p (touch only), 14h11/8h12 video playback, 1.2/1.27 kg, sleeker design [0]

Intel MBP 13 (2020): 1600p (no touch), 10h video playback, 1.4 kg [1]

(Also, OSes are subjective, but macOS has been pretty annoying to me recently.)

[0]: https://www.dell.com/en-us/shop/dell-laptops/new-xps-13-lapt...

[1]: https://www.apple.com/macbook-pro-13/specs/

Re:Black Screen After MacBook Pro Update to macOS Big Sur by unethical_ban on Tuesday November 17, 2020 @01:44PM (#25127820)
Kwpolska, your comment is dead. Dunno why.

The retina-esque screen is a $400 add-on, touchpad probably isn't as good as apple's, touch gesture support/nav no-idea. Battery life no-idea. For a non-macOS though, it looks pretty good.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by owenwil on Monday November 16, 2020 @01:01PM (#25114874)
Trust me, I don’t usually care and would have given up – I think it was way too difficult to fix this. I’ve written extensively about switching from macOS to Windows and much prefer using a PC personally: https://char.gd/blog/2019/the-state-of-switching-to-windows-...

In this case, however, my job requires I use the Mac issued to me so y’know, it was in my interest to get it going again while I waited for a replacement.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by bentcorner on Monday November 16, 2020 @01:39PM (#25115309)
I use a Windows PC and need to use a Mac occasionally for my work. I keep delaying updates on the Mac because I'm terrified of it not coming back up, and I don't know a ton about MacOS. It doesn't help that the Mac is currently remote and I'm working from home.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by rorykoehler on Monday November 16, 2020 @01:15PM (#25115019)
My workflows are all Mac centric. Now I'm also hooked on using iPad as second display via sidecar.i could solve these issues via Linux and I am researching Linux distros by installing on my old mac but nothing quite compares to the Mac ecosystem UX. I solve this particular problem by only ever updating my os long after the problems have been ironed out. Apple are notorius for beta testing on users and frankly I think it's crazy to update your main machine this early in the cycle.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by arrty88 on Monday November 16, 2020 @01:23PM (#25115125)
> I solve this particular problem by only ever updating my os long after the problems have been ironed out. Apple are notorius for beta testing on users and frankly I think it's crazy to update your main machine this early in the cycle.

Exactly. Mac has become windows in this sense. Updates aren’t safe and users must stay a few versions behind.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by rorykoehler on Monday November 16, 2020 @01:26PM (#25115155)
I've been using Mac since 15 years and it's always been this way.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by addicted on Monday November 16, 2020 @01:42PM (#25115359)
With OSX you always updated your OS with 10.x.1 if you wanted it to work regularly.

But in the pre iOSification days a new 10.x version would come out every few years, so the 10.x.1 version would come out a few months later with major bugs ironed out. You waited a few months, and then safely enjoyed 10.x.x updates for another 2-3 years.

With the annual release, your 10.x version comes out every year, the 10.x.1 version a few months later but it’s hardly as well tested, and you’re probably better off waiting for 10.x.2 and then by the time that’s done, Apple is already preparing you for 10.x+1.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by luka-birsa on Monday November 16, 2020 @02:24PM (#25115868)
Try Windows - it's the best interface to experience Linux from :D.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by rorykoehler on Monday November 16, 2020 @11:55PM (#25120377)
I'd choose a different career if I had to use Windows. I detest it even more than the average person.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by st1x7 on Monday November 16, 2020 @01:40PM (#25115321)
Is Linux really that easy to recommend these days? I'm genuinely asking, not sure what the current state is.

My impression is that over the past few years Linux has gotten a bit better at just working out of the box, Mac would be good if you never upgrade the OS (but if you do upgrade, you're rolling the dice on a major disaster) and Windows is pretty much where it was (and still not a great experience for developers). Basically, the 3 platforms seem a lot closer to each other than they used to be.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by DarkmSparks on Monday November 16, 2020 @01:53PM (#25115487)
As a Mac and Linux guy (no more winnndddooows yay!) My Linux machine is my rock, and has been for about 10 years and 3 or 4 hardware upgrades now.

MacOS is really nice, almost as good as Linux and great for those things like photo shop files or those unfortunate days there is no choice but to use MS office.

The only thing I miss about windows since switching my second machine to MacOS is how angry windows would make me every time I tried to do something on it.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jlokier on Monday November 16, 2020 @01:43PM (#25115360)
Several laptop manufacturers officially support Linux these days, even providing it ready-installed.

If the manufacturer can supply a working Linux laptop, that usually means other distros will run without difficulty on it as well.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by jasonsync on Monday November 16, 2020 @01:16PM (#25115049)
I surprised myself last week!

When one of my older Macs became unresponsive due to that Apple network failure problem issue, I spent countless hours running various system cleaner utilities, uninstalling apps, and blindly running obscure terminal commands from Stack Overflow, even though my own initial console log analysis (and instincts) had more-or-less confirmed that it was an issue with trustd network connection timeouts to Apple's own servers.

Fool on me. This coupled with having to get my 2019 Macbook Air keyboard replaced twice (due to sticky keys) has me thinking out loud about moving away from Apple.

Good coverage of the trustd issue: https://tidbits.com/2020/11/13/apple-network-failure-destroy...

Re:Black Screen After MacBook Pro Update to macOS Big Sur by wil421 on Monday November 16, 2020 @02:07PM (#25115650)
Almost every single laptop I’ve owned has had an issue at one point or another. I’ve had more windows laptops with weirder issues than my Macs. The Mac hardware last longer but I’ve had a 2011 MBP finally die after 6 years.

No chance I’m rolling my dice with Linux on a laptop. Touchpad support is funky. I run FreeNAS, Linux, and raspberrypi boxes at my house.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by AdamN on Monday November 16, 2020 @01:59PM (#25115556)
Most people on this list have done similar shenanigans on Windows and Linux too. No OS/manufacturer comes without these kinds of edgecases.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by asutekku on Monday November 16, 2020 @01:41PM (#25115339)
It works 99% of the time and things like this are rare occurences. My experience with linux (Debian & Centos) has been less than stellar.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by ag56 on Monday November 16, 2020 @02:04PM (#25115613)
That is unfair. Apple has a billion devices in active use so there are bound to be the occasional issue. And even with those issues it is still a _far_ better experience than either Linux or Windows.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by luka-birsa on Monday November 16, 2020 @02:22PM (#25115838)
This is untrue. As somebody that just defected from OSX to Windows I can tell you that you're missing out. Windows became a more stable and usable PC where everything just works. My 2 year old top of the line MBP was replaced by a 3 year old Dell XPS 13 after 10 years of OSX and I hate to break it to you, but Windows changed.

I replaced the MBP since the I had to replace the thinnest keyboard in the world, but I had problems with BT, WiFi, crashes, random external monitor glitches, no support for two external monitors via TB 3.0 (look it up, same hardware works under windows!!). Ask my diehard OSX fan coworker that just had to upgrade OSX just to get wifi working at home. I stayed for Windows since my MBP stopped working a week after I got the keyboard replaced and to be honest I really can't bother to move back. Everything just works here.

OSX has left the domain of the power user and has been relegated to into the domain of the consumer user that likes the Apple marketing.

I am monitoring the situation with ARM CPUS closely and that would be a motivation to switch back, but right now it feels my next computer upgrade will be windows based high end laptop. Better OS and better price performance are hard to argue with.

PS: If you're a developer and you're still clinging to OSX, try it - the whole experience is next level (compared to the whole brew ecosystem). Download WSL for windows, get Ubuntu from windows store and use the Windows Terminal to experience native Ubuntu. Hell if you're using VS Code, all you need to do is type "code ." from Ubuntu to open VS Code in Windows and develop in native Linux.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by pyr0hu on Monday November 16, 2020 @02:55PM (#25116218)
Tried WSL2 for webdev, had high expectations for it, but I got disappointed. Docker support is bad and the whole subsystem feels sluggish. All on latest windows build, on a Samsung 970 ssd. I get it, Windows got better i agree, but it's miles away from a Unix experience
Re:Black Screen After MacBook Pro Update to macOS Big Sur by 1_player on Monday November 16, 2020 @04:38PM (#25117287)
My Docker setup isn't slower than when it was running Arch Linux. The downside is that I have to start Docker Desktop compared to having the docker daemon start at boot. The upside is that VSCode and the browser is 10x smoother on Windows than it was on the same hardware on GNOME, so the whole dev experience feels much better.

RAM usage due to the Linux VMs might be the issue in your case, I have loads of it.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by garethrowlands on Monday November 16, 2020 @03:21PM (#25116532)
Was there anything in particular that was bad about Docker? Was it network access? What was sluggish - disk access across the Windows/Linux divide? I've just tried WSL2 out for a few minutes on a new Dell XPS and it seemed kinda neat. Clearly I've not had time to run into problems.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by hackshack on Monday November 16, 2020 @03:17PM (#25116493)
This. Mac user since 1991. In 2016, I needed a VR development box with a fast GPU, so I supplemented the 27” iMac on my desk with a homebuilt PC and 27” 4K monitor. That little PC has earned its keep! I use the PC about 95% of the time. The iMac is now my Pixelmator and OmniOutliner appliance, and backup OBS video capture device.

Win10’s last 2 years of “builds” are very good. It still rots like regular Windows, but I got 3.5 years of heavy use before reinstalling it. Main apps are Unity, Visual Studio 2017, and some hardware design stuff (SOLIDWORKS, KiCad, SEGGER). It feels so liberating to have all my niche apps on the PC without having to virtualize.

User experience on Windows is a little jankier, but the utility of the niche apps makes up for it. I miss AirDrop. If I were to advise Microsoft on one thing: fix the Control Panel situation in Win10. It’s like layers of bad makeup.

Windows also restores much worse than macOS. I miss Time Machine. I purchased a tool called Macrium Reflect which gets me close enough, and actually can restore a bootable system.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by ag56 on Monday November 16, 2020 @04:08PM (#25117015)
Like another poster below with Linux, every two years I purchase a Windows laptop (most recently an XPS 2 years ago) and try it out. And so far every time I’ve been so disappointed, from hardware quality, through coil whine, through WiFi that won’t connect, etc etc. The experience has been horrible.

I truly want what you say to match my personal experience... but sadly not. Mac has just been superior in every way.

And now with the move to Arm and seeing the benchmarks starting to come out, it seems yet another huge reason to stick with Apple.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by spronkey on Saturday November 21, 2020 @06:42PM (#25173582)
I've been on record here for as long as I can remember saying something similar in defense of Apple's laptops, and I've done something similar to you in buying (usually cheap ex-lease) Windows machines every year or two to try them out, but I wouldn't go so far as to say Macs are superior in "every way".

Typically with an Apple device, except for the butterfly keyboards, you could be reasonably sure that all the interaction points were at least mostly decent - display, inputs, speakers microphone, charger, system noise (fan and electrical). You could also be sure that the inbuilt feature set such as WiFi, Bluetooth, Thunderbolt, USB (USB3 was a clusterf... on PCs in the early days), even charging would work reasonably reliably.

The other nice thing about Apple's laptops for a long time has been longevity of batteries - Apple were the first manufacturer to move to 500 cycle batteries with the 2008 Unibodies, and then 1000 cycle batteries later on. Additionally, they have pretty good charging algorithms to preserve battery life over the long term - not something that is the case with many other brands.

However, I think Apple have regressed on some of these fronts since 2015 (maybe they'll redeem themselves with the M1). The touchbar and T2 have been notorious for strange issues. The USB-C only setup has been both obnoxious for anyone who ever needs to use a Type A device, and notorious for strange issues such as heat generation when charging from the "wrong" side - a clear step backwards from MagSafe. The quality of their machines has suffered with the butterfly keyboard, flexgate, less robust internals (see Louis Rossmann for more details!), and anaemic cooling (one of the most impressive things about the original retina MBP was the improvement in the cooling system for sustained performance vs the thicker unibody). MacOS itself also declined in quality somewhat obviously since somewhere around Snow Leopard, with mere flashes of brilliance inbetween since then.

At the same time, Windows 10 has improved dramatically and is now solidly Microsoft's best OS since Windows 7, beating even that OS out in many ways. And, while I don't think the PC laptops have caught up, many of them are now within firing range of Apple devices - certainly close enough that in many cases, for the few that actually get all the touchpoints right, they offer an experience that isn't too far away from the best Mac experience I've had.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by rswail on Tuesday November 17, 2020 @05:49AM (#25122222)
homebrew sucks compared to macports in terms of working well inside the OSX ecosystem. It installs itself out of the way of OSX and /System, works with Xcode and system frameworks and has all of the stuff I've ever needed.

I've been running big sur on a 2020 iMac during the public beta. I had 4 issues that I raised that were solved:

* SMB wasn't loaded at login, so an SMB volume mapping failed

* Inbuilt VPNs (L2TP over IPSec) didn't work until the last but one before the public release, but wireguard worked

* Minor bug loading a JPG as the avatar for a Contact through Maps for my Home card. I got requests for additional info on this one.

In terms of apps and utilities:

* Bartender needed to be redone and has been

* Karabiner needed changes to replace a kext

* Utilities that add keyboard shortcuts etc needed some permission finangling

* Things like OneDrive and Google Backup and Sync needed disk permissions

* iTerm2 needed to be given full disk access

So all in all, Big Sur as an upgrade over Catalina, was pretty smooth. That was from a move from a laptop running Catalina as a Mojave upgrade via Migration Assistant.

YMMV.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by acomjean on Monday November 16, 2020 @02:13PM (#25115721)
Apple has like 20-30 models, so testing should be easier. Also you pay a premium for apple hardware, so there is the expectation that it just works.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by weystrom on Monday November 16, 2020 @03:22PM (#25116550)
Or just use Windows with WSL2/Linux VM.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by bobbylarrybobby on Monday November 16, 2020 @12:56PM (#25114795)
This part of that support article is pretty damning:

WARNING: Back up your data before you restore the firmware on your Mac. When you restore the firmware on a Mac that contains an Apple T2 Security Chip, you are restoring the firmware on the T2 chip and on any volumes on your internal SSD storage. When this process is complete, any data on any SSD volumes is unrecoverable.

So this means that a firmware issue can lead to total data loss? Of course you should always have a backup, but nevertheless...

Re:Black Screen After MacBook Pro Update to macOS Big Sur by stefan_ on Monday November 16, 2020 @01:16PM (#25115041)
I thought this part was more damning:

In very rare circumstances, such as a power failure during a macOS upgrade, a Mac that has the Apple T2 Security Chip may become unresponsive

The chip that has the keys for your system in its hands does not have redundant firmware images, like every cheap ass Android?

Re:Black Screen After MacBook Pro Update to macOS Big Sur by neurostimulant on Monday November 16, 2020 @04:20PM (#25117119)
Even some high end Android devices has dual system partitions to allow rolling back in the event of botched upgrades
Re:Black Screen After MacBook Pro Update to macOS Big Sur by selectodude on Monday November 16, 2020 @12:59PM (#25114832)
The T2 is the SSD controller, which also transparently encrypts all the data on the SSD. So yeah, a firmware issue will nuke your data by design.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by owenwil on Monday November 16, 2020 @01:02PM (#25114889)
The ironic thing about that suggestion is that if you’re reading that article, your Mac is already non-functional anyway, so good luck doing a backup :)
Re:Black Screen After MacBook Pro Update to macOS Big Sur by atoav on Monday November 16, 2020 @01:15PM (#25115024)
Just take out the SSD and ... Oh.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by raverbashing on Monday November 16, 2020 @01:52PM (#25115466)
Even if you could, SSD encryption keys are kept in T2
Re:Black Screen After MacBook Pro Update to macOS Big Sur by azinman2 on Monday November 16, 2020 @03:28PM (#25116611)
Only if you turn on FileVault, AFAIK. And if so, then that’s the sensible encryption story.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by pram on Monday November 16, 2020 @02:45PM (#25116102)
To be clear there are two options: Revive and Restore. Revive just reinstalls the T2 firmware and reboots the system. Restore basically clears the entire system as stated.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by avn2109 on Monday November 16, 2020 @12:40PM (#25114566)
If this fix works as advertised, you should definitely make a StackOverflow post or similar, such that this fix is more searcheable than an HN comment! It could help a ton of people.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by fabianhjr on Monday November 16, 2020 @01:21PM (#25115105)
This is out of scope for both https://StackOverflow.com and https://SuperUser.com.

This is an Apple Hardware and macOS issue and should be posted on https://Apple.StackExchange.com

Re:Black Screen After MacBook Pro Update to macOS Big Sur by OakNinja on Tuesday November 17, 2020 @12:41AM (#25120628)
I left my MBP16 unused for a few days, and during that time the battery got fully depleted. The machine never booted again, and Apple replaced the logic board + T2 chip. It would have been a ~$900 fix excluding labor if it would have been out of warranty.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by pomian on Monday November 16, 2020 @01:04PM (#25114921)
Just out of practical curiosity, how long, about, is: "a long time." ? (Minutes, hours, etc.) What great post. Thank-you from everyone who may need it.
Re:Black Screen After MacBook Pro Update to macOS Big Sur by owenwil on Monday November 16, 2020 @01:05PM (#25114943)
I waited ten minutes and it worked. Felt like a long time when it was sitting there blank!
Re:Black Screen After MacBook Pro Update to macOS Big Sur by gosukiwi on Monday November 16, 2020 @03:08PM (#25116393)
> Apple suggested a replacement machine

That's so wrong on so many levels.

Re:Black Screen After MacBook Pro Update to macOS Big Sur by thealienthing on Monday November 16, 2020 @12:48PM (#25114688)
You’re a real trooper to go through this.