News for hackers. Stuff that matters.
Re:The ‘-ize’ have it (2012) by rbg246 on Sunday August 09, 2020 @06:16AM (#24098556)
Well this is intensely disappointing. I shall have to find something else to be snobby about - I feel like I have been living a lie, I have spent countless hours changing the dictionary in windows or osx to be UK English just so it didn't correct me on this. What other spelling idiosyncrasies are there that I can get on my high horse about?
Re:The ‘-ize’ have it (2012) by throw0101a on Sunday August 09, 2020 @07:25AM (#24098887)
> What other spelling idiosyncrasies are there that I can get on my high horse about?

Long and short number scales?

* https://en.wikipedia.org/wiki/Long_and_short_scales

Is "billion" a thousand million (10^9) or a million million (10^12)? Numberphile video:

* https://www.youtube.com/watch?v=C-52AI_ojyQ&t=5m30s

TL;DR: billion = bi-million = two of 10^6 = 10^{6x2} = 10^12. trillion = tri-million = 10^{6x3} = 10^18, and not 10^12. quadrillion, pent….

Re:The ‘-ize’ have it (2012) by eyko on Sunday August 09, 2020 @04:40PM (#24102689)
In spanish (at least in es-ES), billion is a million million, which is really annoying when you see clear translation errors. Often, a reporter will read a billion here or there in an english source, and leave it as is, bringing an order of magnitud error into the translated news article. This is especially annoying when that error makes its way into other opinion pieces comparing budgets in the billions and trillions where the author is completely oblivious to the fact that they're mistaken because of a translation error upstream.
Re:The ‘-ize’ have it (2012) by rbg246 on Tuesday August 11, 2020 @08:47PM (#24127567)
That is a massive problem especially when as you say when talking about political budgets.
Re:The ‘-ize’ have it (2012) by rbg246 on Sunday August 09, 2020 @08:25AM (#24099141)
Yes I like this. I haven't gone there and I may end up with no friends but I feel I may start correcting others on their incorrect definitions on billions.
Re:The ‘-ize’ have it (2012) by dehrmann on Sunday August 09, 2020 @04:53PM (#24102820)
What's the point of the long scale? The numbers seem impractically large for anything other than science (which uses scientific notation, anyway). The only other time I've really seen "quadrillion" actually used is in with the Zimbabwe dollar.
Re:The ‘-ize’ have it (2012) by zapzupnz on Sunday August 09, 2020 @06:42PM (#24103581)
> What's the point of the long scale?

Conversely, plenty of languages continue to use long scale as the standard numbering system, and it used to be standard in English. Other cultures and languages use different systems altogether.

So, let's rephrase the question.

What's the point of the short scale?

Re:The ‘-ize’ have it (2012) by ferzul on Sunday August 09, 2020 @09:52PM (#24104714)
You have ignored the questioner's question. Why?

The fact that something has always been done is not a reason to do it again.

Re:The ‘-ize’ have it (2012) by zapzupnz on Monday August 10, 2020 @03:14PM (#24112909)
> You have ignored the questioner’s question. Why?

First, I have not ignored the question. My answer to the question is right there is in my dissection and rephrasing of the question.

Second, the question as asked doesn’t make sense. Number scales are arbitrary; there is no ‘point’ for any one scale over another. Long, short, Chinese, Indian — so long as your interlocutor understands what you mean in the language and culture in which you’re speaking, neither has any more point than another.

Which is basically what my comment said, and plenty of people have thus far been able to interpret that without me needing to explain such.

Re:The ‘-ize’ have it (2012) by throw0101a on Monday August 10, 2020 @07:17AM (#24107983)
> What's the point of the long scale?

AFAICT, the long scale was the original one. It was the short scale that was "invented" later, so the question should be: why was the short scale created?

Re:The ‘-ize’ have it (2012) by bakuninsbart on Monday August 10, 2020 @01:35AM (#24105900)
A lot of germanic and romanic countries just change the ending, so Million*1000 = Milliard and the Billion and Billiard, etc. Now I could be wrong about this, but I think it might have been part of Napoleons norming efforts.

There's no reason to switch to the short scale, that's the reason I guess.

Re:The ‘-ize’ have it (2012) by vr46 on Sunday August 09, 2020 @06:26AM (#24098596)
On the contrary, I feel this opens up whole new areas for snootiness - some years ago a colleague jokingly berated me via group email for my ‘American spelling’ and my riposte was the Wikipedia entry for Oxford Spelling which put an end to that skirmish.
Re:The ‘-ize’ have it (2012) by rbg246 on Sunday August 09, 2020 @08:12AM (#24099077)
I like it, it's a double down on snootiness! It's not over!
Re:The ‘-ize’ have it (2012) by quietbritishjim on Sunday August 09, 2020 @06:35AM (#24098643)
Here's something else to get worked up about. One overcorrection I often see (even elsewhere in these comments) is "focussed". This is an attempt to avoid the American tenancy never to double consonants in words with the "ed" ending, but it's not correct in British English to always double the consonant. Instead, the rule is too double the letter when the last syllable is stressed, so "focussed" would sound like foCUSSED whereas the normal pronunciation is FOcused. Of course, there are plenty of exceptions to this rule.
Re:The ‘-ize’ have it (2012) by ubercow13 on Sunday August 09, 2020 @08:33AM (#24099175)
My intuition was that the doubling of the consonant was to prevent the modifying effect that the e would normally have. For example bat->batted. Bated doesn’t work because it looks like it should be pronounced the same as baited.
Re:The ‘-ize’ have it (2012) by function_seven on Sunday August 09, 2020 @03:05PM (#24101972)
This makes sense. If I didn't already know the word, I could see mistakenly pronouncing “focused” to rhyme with “accused” (i.e. fohk-YOO-zed )
Re:The ‘-ize’ have it (2012) by stilley2 on Sunday August 09, 2020 @08:01AM (#24099016)
Not spelling, but my wife (Canadian) and I (American) recently had an interesting discussion about the placement of a comma following a quoted portion of a sentence. Americans are commonly taught the comma /always/ goes before the closing quotation marks, whereas in British English it depends on the context. You know it's a good weekend discussion when the Chicago Manual of Style gets involved.
Re:The ‘-ize’ have it (2012) by dehrmann on Sunday August 09, 2020 @04:38PM (#24102669)
I can't remember where I read this, but punctuation is placed before the closing quote because it looks nicer, and some of this might be because of typewriting and fixed-width fonts. Two spaces after a sentence is also a carryover from typewriters. Meanwhile, programming culture and its regular grammars is creeping into written language, and we're seeing punctuation follow quotes more often.

It's interested how technologies of the time affect grammar and language.

The opposite story I head was the the Chinese invented movable type before the West, but it's a lot less practical for languages without an alphabet.

Re:The ‘-ize’ have it (2012) by rbg246 on Sunday August 09, 2020 @08:29AM (#24099155)
This is suitably obscure. Do you mean inverted commas or a comma?
Re:The ‘-ize’ have it (2012) by Zach_the_Lizard on Sunday August 09, 2020 @08:41AM (#24099217)
I think it's something along the lines of:

"Hacker News is," he said, "a website." (American)

vs.

"Hacker News is", he said, "a website". (British)

We Americans are taught to always put punctuation inside the quotation marks, with a few limited exceptions.

I gather our cousins across the sea are taught not to do this.

It's started to bleed into my own writing given the international nature of the teams I work with.

Re:The ‘-ize’ have it (2012) by clairity on Sunday August 09, 2020 @12:45PM (#24100839)
as an american, i never liked the inside rule, although it does "look right" to me from being taught it all through school.

the comma is not part of the quote, so it shouldn't be inside, typographical systems be damned. i tend to put it outside, to the horror of (american) grammar snobs everywhere. i think programming is what got me to seriously reconsider the placement.

Re:The ‘-ize’ have it (2012) by AnonHP on Sunday August 09, 2020 @10:28AM (#24099847)
I read long ago that the American convention comes from an old printing press limitation and flowed into writing too. This answer [1] on English StackExchange has some details. I’m sure many other sites have written about this in detail.

[1]: https://english.stackexchange.com/questions/150703/why-is-th...

Re:The ‘-ize’ have it (2012) by Someone on Sunday August 09, 2020 @01:11PM (#24101052)
Seems implausible to me. As one of the replies indicates, most periods at the end of lines won’t follow a quote, so this solution doesn’t work there.

Worse, it only applies to lines ending in a period. Those are extremely rare because hand-set lines typically ended with filler, in order to make all lines in a block of text equal length. See for example https://letterpresscommons.com/setting-type-by-hand/: “ As you are setting your line of type and finish the last word of the line, you’ll need to fill out the rest of your line with word spacing material”

I also would think most exclamation marks would not be wider than periods and commas. Why, then, are those typically rendered outside closing quotation marks?

https://faqs.cs.uu.nl/na-dir/alt-usage-english-faq.html says

“According to William F. Phillips ([email protected]), in the days when printing used raised bits of metal, "." and "," were the most delicate, and were in danger of damage (the face of the piece of type might break off from the body, or be bent or dented from above) if they had a '"' on one side and a blank space on the other. Hence the convention arose of always using '."' and ',"' rather than '".' and '",', regardless of logic.”

I don’t see obvious objections to that explanation.

Re:The ‘-ize’ have it (2012) by superbaconman on Sunday August 09, 2020 @12:42PM (#24100806)
The inside comma never made sense to me. Plus if you consider the quotation marks, the commas themselves almost seem redundant.
Re:The ‘-ize’ have it (2012) by stilley2 on Sunday August 09, 2020 @09:05AM (#24099347)
Yeah basically. I'm still not entirely clear what the British rules are.
Re:The ‘-ize’ have it (2012) by PaulDavisThe1st on Sunday August 09, 2020 @12:45PM (#24100834)
Generally, whatever the rulers say.
Re:The ‘-ize’ have it (2012) by rbg246 on Sunday August 09, 2020 @09:38AM (#24099562)
Thanks that makes it clear yes I was taught outside (from Australia) and I didn't know there was an inside rule, I must look out for that in the novel I'm reading
Re:The ‘-ize’ have it (2012) by open-source-ux on Sunday August 09, 2020 @07:08AM (#24098797)
"What other spelling idiosyncrasies are there that I can get on my high horse about?"

Not spelling, but I prefer the way of referring to brackets in the UK. It's simpler and logical:

() = brackets

[] = square brackets

{} = curly brackets

In the US:

() = parentheses (what a mouthful :-)

[] = brackets

{} = braces

Re:The ‘-ize’ have it (2012) by Zach_the_Lizard on Sunday August 09, 2020 @08:46AM (#24099244)
I've heard "square brackets" here in the US.

I'd also use the term "curly braces" over just "braces" but either is acceptable.

Re:The ‘-ize’ have it (2012) by amelius on Sunday August 09, 2020 @01:31PM (#24101203)
I thought "<" was for "bra" and ">" for "ket", so "<>" for bra(c)kets?

https://en.wikipedia.org/wiki/Bra%E2%80%93ket_notation

Re:The ‘-ize’ have it (2012) by Symbiote on Tuesday August 11, 2020 @03:34AM (#24118056)
That's an obscure scientific notation in a specific field. Very few native speakers will be familiar with it.

< and > are less-than and greater-than, or angle brackets if the real angle brackets are unavailable.

Re:The ‘-ize’ have it (2012) by open-source-ux on Sunday August 09, 2020 @02:57PM (#24101919)
<> = angle brackets

(At least that's the UK usage I'm familiar with)

Re:The ‘-ize’ have it (2012) by thaumasiotes on Sunday August 09, 2020 @03:54PM (#24102346)
Really? I would have identified "angle brackets" as ⟨⟩.
Re:The ‘-ize’ have it (2012) by open-source-ux on Sunday August 09, 2020 @04:43PM (#24102716)
Yes, those are angle brackets but they are not listed on an ASCII keyboard so most people use the < (less than) and > (greater than) symbols and these are still referred to as angle brackets (for example when referring to HTML or XML tags).

There is a difference between how brackets are referred to in mathematics[1] vs usage in written everyday English: https://mathworld.wolfram.com/AngleBracket.html

[1] Another interesting difference between UK and US English:

UK = Maths (shorthand for mathematics)

US = Math

Re:The ‘-ize’ have it (2012) by Lammy on Sunday August 09, 2020 @07:48AM (#24098974)
"parens" / pəˈrɛnz /
Re:The ‘-ize’ have it (2012) by throwanem on Sunday August 09, 2020 @06:41AM (#24098667)
How about webpages that flow their text across multiple columns?
Re:The ‘-ize’ have it (2012) by Lammy on Sunday August 09, 2020 @06:44AM (#24098679)
Very impressive text justification / linebreaking algorithm though. I didn't know FrontPage could do that!

  <meta content="Microsoft FrontPage 12.0" name="GENERATOR" />
Re:The ‘-ize’ have it (2012) by throwanem on Sunday August 09, 2020 @07:47AM (#24098968)
There's a longstanding and widely implemented CSS working draft for columnar text, that even IE 10 apparently supports. No idea if this page is actually using it, since I'm not going upstairs just to pull up this page and poke around its stylesheet, but I could imagine Expression Web (aka Frontpage 12) making it available.

edit: Being upstairs anyway for other reasons, I've just had a look. It's just two <div> elements as columns in an old-school grid style system that predates CSS Grid. Text is flowed within the columns using a text-align: justify; rule, so the impressiveness of the result is properly credited to the browser rather than the site design.

Re:The ‘-ize’ have it (2012) by RandomBacon on Sunday August 09, 2020 @01:21PM (#24101136)
I just use:

    <p style="columns:3;">
Re:The ‘-ize’ have it (2012) by throwanem on Monday August 10, 2020 @06:46AM (#24107691)
Yes, that's specified in the WD I mentioned. https://www.w3.org/TR/css-multicol-1/
Re:The ‘-ize’ have it (2012) by RandomBacon on Monday August 10, 2020 @02:45PM (#24112606)
I'm sorry. Thank you for pointing it out.
Re:The ‘-ize’ have it (2012) by throwanem on Tuesday August 11, 2020 @09:14AM (#24119929)
You've nothing for which to apologize that I can see! If anything, I was unduly curt, and I'm sorry for that.
Re:The ‘-ize’ have it (2012) by Lammy on Sunday August 09, 2020 @06:42AM (#24098673)
My English spelling idiosyncrasy pet peeve is how correlation is spelled with two 'r's and one 'l' but corollary is spelled with one 'r' and two 'l's
Re:The ‘-ize’ have it (2012) by kmm on Sunday August 09, 2020 @07:02AM (#24098763)
It might be completely useless, but that has an etymological reason. Correlation derives from con + relation, where the n assimilated to the following r. On the other hand, corollary ultimately derives from corona with some diminutive suffix containing a double l.
Re:The ‘-ize’ have it (2012) by Lammy on Sunday August 09, 2020 @07:34AM (#24098922)
Neat!
Re:The ‘-ize’ have it (2012) by williamdclt on Sunday August 09, 2020 @01:33PM (#24101219)
And topical, double points!
Re:The ‘-ize’ have it (2012) by ferzul on Sunday August 09, 2020 @10:04PM (#24104769)
tire vs tyre - apparently “tire” is older, but when pneumatic tyres became a thing, the spelling “tyre” caught on in England. So that's not an option.

kerb vs curb (n) - again, curb is older, but somehow a spelling error^W varient caught on in England. In this case, it is unfortunate since Scottish people allegedly pronounce “curb” but write “kerb” (they pronounce ur like u+r and er like e+r, not as a single sound). So this one is not just not an option, it's actively hostile to many British peoplee

-or vs -our: unless you will spell governour and use other like spellings, you have no historical leg to stand on so you might as well allow both variants.

program is the older spelling, programme is preferred by those who are jealous of the French.

I never understood the logic of swapping -re to -er in theatre, centre tho. I mean, why only -re but not -le? why don't Americans tickel and cuddel? Surely the logic is the same. So I think you can mount your high horse here.

Re:The ‘-ize’ have it (2012) by hnzix on Sunday August 09, 2020 @06:52AM (#24098714)
Aluminum / aluminium and pronouncing herbal as "errbal". Also "cracking" windows.
Re:The ‘-ize’ have it (2012) by pacaro on Sunday August 09, 2020 @12:21PM (#24100635)
I've noticed that American and British pronunciation of French loan words tend to be inverted, wherever one is using approximate french pronounciation, the other has anglicized

In the kitchen, the American standard favors the French: herb (herb vs urb) and filet (fill-it vs fill-eh)

In a car, it is reversed: chassis (shassy vs chassy) and coupe (coop-eh vs coop)

Others that differ include (all where Brits favour a francophone pronounciation) papier maché, en route, double entendre

Re:The ‘-ize’ have it (2012) by kevin_thibedeau on Sunday August 09, 2020 @01:03PM (#24100980)
What drives me nuts is RP speakers that aspirate leading H's but insist on using the wrong article before them anyway. And the Americans that foolishly imitate them.
Re:The ‘-ize’ have it (2012) by pacaro on Sunday August 09, 2020 @01:32PM (#24101207)
The whole "an hotel" nonsense?
Re:The ‘-ize’ have it (2012) by rbg246 on Sunday August 09, 2020 @08:28AM (#24099149)
I do however admire the American spelling of aluminium it does a great job of making alluminum sound more exotic.
Re:The ‘-ize’ have it (2012) by stevekemp on Sunday August 09, 2020 @12:07PM (#24100539)
Why worry about spelling when you can argue about whether two-spaces after a period is better than one?
Re:The ‘-ize’ have it (2012) by scbrg on Sunday August 09, 2020 @12:58PM (#24100940)
That discussion becomes especially worthwhile when the text you're arguing about gets wrapped in HTML :-)