Re:Robotic gripper uses acoustic levitation for contact-free...
by mreome on Friday January 24, 2020 @11:50AM
(#22139956)
I think acoustic levitation is going to be a technology worth watching over the coming years. I'm very curious what could be achieved with application specific speakers designed/built as arrays as opposed to discrete stock speakers assembled into arrays. It could end up being like comparing a matrix of discrete 5mm LEDs to an LED monitor in terms of precision/accuracy and open up a lot of possible applications.
Re:Robotic gripper uses acoustic levitation for contact-free...
by hanniabu on Friday January 24, 2020 @02:22PM
(#22141543)
I really like what they're doing with using it for volumetric displays. They take a small white ball that's a few mm in diameter and they move it around a 3d space really quickly to create the 3d "pixels" while at the same time shining light on it at each position to color the pixel.
This is a great video with a demo and explaining how it works:
Re:Robotic gripper uses acoustic levitation for contact-free...
by lachlan-sneff on Friday January 24, 2020 @01:36PM
(#22141118)
You mean, like arrays of microscale acoustic generators? Maybe if the wavelength was small enough, one could manipulate singular molecules with nanometer precision? 3Ghz ultrasound at sea level has a wavelength of about 150 nm.
Perhaps the endgame of this would be a phased array that can generate phonons with extreme accuracy.
Re:Robotic gripper uses acoustic levitation for contact-free...
by traverseda on Friday January 24, 2020 @03:58PM
(#22142390)
I mean remember that the way these things work is by manipulating air molecules. Manipulating single-molecules is going to be difficult since you're always going to be at the mercy of your carrier fluid/gas.
Re:Robotic gripper uses acoustic levitation for contact-free...
by pudsbuds on Friday January 24, 2020 @12:15PM
(#22140267)
Does the actual soundwave itself have an effect on these parts? They mentioned something about a thin layer of lubricant. Wouldn't soundwaves also mess with this layer as well?
Re:Robotic gripper uses acoustic levitation for contact-free...
by jstarfish on Friday January 24, 2020 @12:37PM
(#22140492)
It shouldn't; fluid is an insulator and the lubricant has enough (viscosity? tensile strength? I'm not a materials guy) to adhere to the part in question. The soundwaves must be super high-frequency so they should just get absorbed without displacement.
I'd be curious to see if something like this could succesfully handle an Etch-a-Sketch or Magna-Doodle without ruining the picture though.
Re:Robotic gripper uses acoustic levitation for contact-free...
by serf on Friday January 24, 2020 @03:06PM
(#22141933)
>a phenomenal deal.
eh. i've gone through 4 of them. I only keep buying them when theyre heavily discounted. They begin leaking down quickly, and parts aren't readily available to repair the cylinder, so you're stuck measuring and finding everything yourself -- a feat not worth the price of the product.
i'd have saved money by now if I had just bought something nice and rebuildable.
Re:Robotic gripper uses acoustic levitation for contact-free...
by papreclip on Friday January 24, 2020 @03:47PM
(#22142285)
>In theory
I don't think so. My understanding is that there's a limit to sound wave amplitude (decibels) beyond which you enter the domain of the shockwave. a shockwave is an irreversible process which couldn't be used to maintain some state the way a standing wave can. Without enough concentrated power, you can't lift an arbitrarily heavy(dense) object
If you raise the pressure of the medium, the decibel limit goes up, but air at atmospheric pressure is probably going to fall well short of what you'd need to hover a car
Re:Robotic gripper uses acoustic levitation for contact-free...
by adrianmonk on Friday January 24, 2020 @09:07PM
(#22144168)
It might just be possible. First of all, if you look at static pressure, obviously hovercraft exist and work. And tornadoes can lift cars off the ground. Even strong winds can.
Doing some numbers, my car appears to have a horizontal area of about 7.5 m^2 and a mass of about 1500 kg. With earth's gravity, that means 14700 N spread over 7.5 m^2, which means average pressure of 1960 Pa.
So the pressure needed to lift my car would be about 2% of the strongest pressure that can exist in a sound wave.
Presumably it's a little more complex than that because sound waves oscillate and can't exert constant pressure. So some factor has to be added for that. But seems like there's about 50X to play with before hitting the limit of shock waves.
It's going to be crazy loud, though. Like a gun going off continuously.
This is a great video with a demo and explaining how it works:
https://youtu.be/tzWP-NL3Lck
Perhaps the endgame of this would be a phased array that can generate phonons with extreme accuracy.
https://www.youtube.com/watch?v=odJxJRAxdFU
I'd be curious to see if something like this could succesfully handle an Etch-a-Sketch or Magna-Doodle without ruining the picture though.
https://www.harborfreight.com/3-Ton-Heavy-Duty-Rapid-Pump-Fl...
eh. i've gone through 4 of them. I only keep buying them when theyre heavily discounted. They begin leaking down quickly, and parts aren't readily available to repair the cylinder, so you're stuck measuring and finding everything yourself -- a feat not worth the price of the product.
i'd have saved money by now if I had just bought something nice and rebuildable.
I don't think so. My understanding is that there's a limit to sound wave amplitude (decibels) beyond which you enter the domain of the shockwave. a shockwave is an irreversible process which couldn't be used to maintain some state the way a standing wave can. Without enough concentrated power, you can't lift an arbitrarily heavy(dense) object
If you raise the pressure of the medium, the decibel limit goes up, but air at atmospheric pressure is probably going to fall well short of what you'd need to hover a car
Doing some numbers, my car appears to have a horizontal area of about 7.5 m^2 and a mass of about 1500 kg. With earth's gravity, that means 14700 N spread over 7.5 m^2, which means average pressure of 1960 Pa.
Wikipedia says (https://en.wikipedia.org/wiki/Sound_pressure#Examples_of_sou...) that a shock wave happens at 101,000 Pa.
So the pressure needed to lift my car would be about 2% of the strongest pressure that can exist in a sound wave.
Presumably it's a little more complex than that because sound waves oscillate and can't exert constant pressure. So some factor has to be added for that. But seems like there's about 50X to play with before hitting the limit of shock waves.
It's going to be crazy loud, though. Like a gun going off continuously.
Found the name of my band