https://www.highviewpower.com/benefits/
When I searched Google Scholar, I found this 2016 report from their first 350 kilowatt pilot plant at the University of Birmingham:
https://www.researchgate.net/profile/Adriano_Sciacovelli/pub...
That pilot project claimed less than 25% efficiency, but the authors seemed confident efficiency could be raised. A 5 megawatt demonstration plant has been running in the UK since 2018:
https://www.greentechmedia.com/articles/read/highview-power-...
I presume that the 0.35 MW and 5 MW projects worked reasonably well if they are now trying to develop a 50 MW project.
Animation https://www.youtube.com/watch?v=Nu9zLOBi0-E
Interview https://www.youtube.com/watch?v=4hbyzuES5J0
Recent article https://www.theguardian.com/environment/2019/oct/21/uk-firm-...
On the other hand, something like pumped hydro is less efficient and takes longer to bring online, but can store the energy for months or even years.
For anyone wondering how long that is, the largest pumped hydro plant in the UK can be at full capacity in 16 seconds from standby, or 75 seconds from cold.
(Interesting side note - when I took a tour of Dinorwig some years back, the guide said that when the facility was built it rarely needed to run more than 1 turbine - now they routinely fire up all 6. At some point it will run out of capacity...)
Other dimensions are total capacity, total cost, ramp-up / ramp-down times, storage and delivery rates, and various elements of technical complexity.
Batteries offer moderate-scale, fairly-expensive, moderate density, and relatively low storage and delivery rate, energy storage. They're exceptionally useful for mobile uses (from handheld to vehicular), but may not be as desirable for stationary systems.
There's a spectrum of energy storage options, ranging from capacitive storage (very responsive, but also expensive, inefficient, high-rate but low-yield.), flywheel, battery, physical mechanisms (pumped hydro, compressed / liquified air energy storage), and chemical (electrolysis, fuel cell, fuel synthesis).
If you're storing energy when it's abundant and releasing it when it's highly scarce, net efficiency doesn't matter nearly as much as matching generation and load capacity. Losing energy because you don't have the capacity or capture rates means a theoretically highly-efficient process is actually lower in net efficiency.
The duration of energy storage, ranging from a few seconds (capacitors) or minutes (flywheel) to proven-at-hundreds-of-million-years (hydrocarbon chemical energy storage) also matters. If you're trying to smooth out transients, capacitors or flywheels (mimicking "spinning reserve" or inertia) are your tool. If you're shifting over a period of hours, batteries, CAES, and pumped hydro come into play, with the latter offering long-term capacity of months if needed. Fuel synthesis could in theory allow shifting by years or decades, with very stable storage, though a net round-trip efficiency of ~15-20% (losses in synthesis compounding Carnot efficiencies of thermal energy generation, if used for electrical generation).
I've got concerns over LAES, well reflected in @aurizon's comment: https://news.ycombinator.com/item?id=21996594
Thermal losses in cooling, and the need to supply energy to re-heat the liquified air, make me question this method.
Anyone know the efficiency? Batteries are in the high 90s, but are so expensive that they don't make sense for stockpiling. (Charge in the summer when days are long, discharge in the winter when everyone needs to turn on the heat.)