My father in law was very surprised when I could just walk away holding one end of the coiled garden hose and it uncoiled itself neatly with no kinks. The trick was, of course, that I was the one who wrapped it this way the day before!
This technique as well as figure 8 with I use on guylines (when hiking with my tarp), create a counter clockwise twist for every clockwise twist, thus eliminating the tension that causes cables/guylines/ropes to eventually tangle up.
Here is another guide [1].
Note that for longer lines, it is helpful to first fold the line in half to shorten. Also works great for extension cords since both the male/female end are handily together [2].
[0] https://en.m.wikipedia.org/wiki/Chain_sinnet
For a bit of rope it would be fine, though.
The is the best video I was able to find that illustrates it: https://www.youtube.com/watch?v=ktI0mLAoSTc
Over-under is good for long, thick, delicate cables (e.g. mic/guitar cables). For shorter, thinner cables (e.g. USB cables) I use this technique: https://www.youtube.com/watch?v=uXMG917XsvU
I have done it so much I can now do it quickly without looking at my hands, so I just automatically do it before putting a cable away or in my bag.
I now never have to detangle birds nests of cables. Over the course of the ~15 years I have been practicing responsible cable storage, that must add up to a lot of time.
Here is an example for how I store guylines attached to my tarp: https://www.youtube.com/watch?v=0PicTsgj5lA
You mean like this?
The only cables I really deal with are network cables and extension cords and I've always just done the wrap-around-your-palm-and-elbow-method. What am I missing out on?
The person who showed me how to do it said, "If you've done it right, you should be able to do this"; and with the coiled microphone cable in one hand, she held one end with her thumb and tossed the rest of the coil outwards. It uncoiled in the air and landed in a straight line, no tangles or knots.
Basically, if you do this: 1) The cables are less likely to be damaged, 2) the cables are a lot more 'weildy': they don't get tangled in interminable knots, and expand very easily. The cables themselves remain looking nice as well, and don't get ugly kinks in them.
This came up, though the technique for coiling looks different:
https://www.youtube.com/watch?v=rFokJdx12yo
Suspecting (without trying it), that it might work out as the same type of coiling though.
A lot of teamsters, gaffers, and grips did not like having to carry a 50lb cable further than they had to so many loved they could lay the cable down, pick up one end, and walk with it to the junction in order to lay them. (Temporary power, I mean).
As the one responsible for the department looking after that gear, those figure-eight cables were a nightmare because we'd have the prime experience of re-wrapping them all so that we could store them. That caused a time-pinch when we had to handle intake and loadouts at the same time.
I don't do that work anymore, but it's personal hahaha
99% sure that's a side benefit not the reason.
The way the audio techs explained it to me was as a method of reducing stress on multi-strand copper inside. i.e. the reason why it unwinds cleaner is because said tension isn't there.
Cables should never be coiled in the same direction. It creates kinks when unwound and make it extremely likely for knots to form (ever leave your headphones in your pocket?).
If a cable isn't being installed permanently it should be "wrapped" using a technique called "over-under". Hard to describe in text, so here's a video:
https://www.youtube.com/watch?v=cpuutP6Df84
Personally I disagree with his method, what I do is do the "over" loop by placing my palm over the cable, and on the under loop, put your palm under the loop. Then when you pull the loop to your fixed hand, you always keep your palm down when laying it. Very quick way, eventually becomes fast with practice. Also useful to unroll kinks from the cable when you wrap it, and always tie the bastard off because if one end falls through you'll get knots.