News for hackers. Stuff that matters.
Re:Vinyl set to outsell CDs for first time since 1986 by cosmotic on Sunday September 08, 2019 @08:48PM (#20914332)
If only there were a durable music format that had absolute perfect quality, didn't need special handling, no DRM, no compression artifacts, was stereo, and handled frequencies all the way down and all the way up to where humans can hear. Oh, the CD!
Re:Vinyl set to outsell CDs for first time since 1986 by lagadu on Monday September 09, 2019 @04:21AM (#20916173)
CD quality isn't that good (sample rate is fine, bitrate isn't) and it definitely has compression artifacts at the low end but that's a nitpick. That said, the biggest problem with the CD is that good CD transports are few and far between and pretty much all CD players have garbage-tier DAC implementations.

edit: to be clear, a CD will have far more resolution and technical capacity available than a vinyl ever will, I'm just saying that CDs have their own issues and aren't perfect.

Re:Vinyl set to outsell CDs for first time since 1986 by simias on Monday September 09, 2019 @04:43AM (#20916281)
You'd have to come up with a good source to convince me that 16bits per sample is not good enough for consumer audio (or that you could tell the difference even in perfect conditions. So might be able to hear it, the vast majority of people won't) but beyond that it doesn't really matter in this discussion because vinyls have a much worse fidelity. If you sample vinyl audio at more than 16bits you'll just be sampling noise anyway.

>pretty much all CD players have garbage-tier DAC implementations.

A true audiophile I see, anything consumer-grade is "garbage" in order to justify the purchase of ridiculously overpriced equipment. The truth is that it's very cheap to design a decent quality DAC or ADC these days, mainly thanks to digital processing and the fact that those chips are made in huge quantities. Digital filters are high quality these days and the use of oversampling makes it a lot easier to design good analog filters.

Audiophiles are very hard to take seriously because the hobby is 95% snake oil and 5% reasonable engineering. I'm sorry if you're part of the 5% and I overreacted but it's one of these hot buttons for me. I've spent so much time arguing with people that, no, it made to mathematical sense to want 32bit samples or 160kHz audio...

Re:Vinyl set to outsell CDs for first time since 1986 by lagadu on Monday September 09, 2019 @05:03AM (#20916400)
> A true audiophile I see, anything consumer-grade is "garbage" in order to justify the purchase of ridiculously overpriced equipment.

Actually I'm rather fond of the $80 SDAC and it stands tall among other, more expensive stuff I have (I'm listening to it as type this in fact). It's miles ahead of any CD player DAC. Seriously, a CD transport into a cheap DAC will sound very noticeably better. Admittedly I've only sampled about a dozen or so supposedly good players and eventually lost interest so it's not a big sample pool.

I'm with you in that I also agree that it's dumb how most amplitude-signal DACs market "32bit/768khz" despite that sample rate being effectively useless and the noise floor in DS chips being at around ~20 bits worth of resolution and that's a best case scenario.

edit: honestly when it comes to amps and dacs, in my experience, there is no spec or measurement that correlates with how good it sounds so with those I pretty much gave up on anything other than my ears.

Re:Vinyl set to outsell CDs for first time since 1986 by Synaesthesia on Monday September 09, 2019 @10:05AM (#20918268)
I don’t think anyone has ever heard the difference between DAC’s in a double blind test.
Re:Vinyl set to outsell CDs for first time since 1986 by sigmos on Monday September 09, 2019 @08:42AM (#20917553)
I have a thought it’s the composers’ intention to how listeners will hear. There was once I spent a long time tweaking frequencies to my taste, it’s clear we have too many parts to just to get the right pitch and nuance details.
Re:Vinyl set to outsell CDs for first time since 1986 by collyw on Monday September 09, 2019 @11:02AM (#20918823)
> Audiophiles are very hard to take seriously because the hobby is 95% snake oil and 5% reasonable engineering.

I bought some half decent speakers by my standards around a year ago (Creative T40s for what its worth).

As a test I tried some MP3 tracks at various bitrates sitting on my hard drive to see if I could guess the difference. Most of the time I thought the 192kbps sounded better than the 320kbps.

Re:Vinyl set to outsell CDs for first time since 1986 by thirdsun on Tuesday September 10, 2019 @08:13AM (#20927312)
To be fair, speakers are the component in your signal chain that actually has a major impact on audio quality - it is by far the most important factor and it should take up the majority of your (audio) budget.

Not to sound condescending but those speakers you mention don't seem very decent at and probably don't warrant any conclusion towards the benefits of various compression settings or audiophile configurations in.

Re:Vinyl set to outsell CDs for first time since 1986 by collyw on Tuesday September 10, 2019 @12:50PM (#20930256)
Yes, I am not an audiophile. They still sound a lot better than the TV speakers the sound was coming through before and they are more than good enough for me. Some kids listen to music through the speakers on their phones.
Re:Vinyl set to outsell CDs for first time since 1986 by patentatt on Monday September 09, 2019 @12:07PM (#20919422)
While it is ‘easy’ to make good DACs nowadays, the market is full of bad implementations that shoot themselves in the foot. And it’s not strictly correlated with price, as one might expect. If you’re interested in this sort of thing, check out audiosciencereview.com for a lot of good analysis and review of specific products.
Re:Vinyl set to outsell CDs for first time since 1986 by electrograv on Monday September 09, 2019 @10:09AM (#20918302)
Source: Section 3.5 (page 9) of this peer-reviewed meta-analysis days “it is well known that the dynamic range of human hearing may exceed 100db. Therefore, it is reasonable to speculate that bit depth beyond 16 bits may be perceived.”

https://qmro.qmul.ac.uk/xmlui/bitstream/handle/123456789/134...

Additionally, this is purely talking about loudness dynamic range, not even including resolution or JND (just noticeable difference). I will demonstrate to you below how even 20 bits per sample is insufficient in some cases.

Imagine for a moment that you could argue that the human hearing threshold of quantization error is only 4 bits (only 16 discrete values!) at the sound level of a pin dropping (10db). Now, I think we can all agree that’s absurd; we need a lot more than just 16 discrete amplitude values to represent the sound of a pin drop indistinguishable from reality to a human ear. But for the moment, let’s be really really generous to your point and assume it’s enough!

Now, let’s suppose we want to extend the recording so sounds at 110db appear later on (say, an intense bass explosion in an action movie after a quiet scene early on). To do this without clipping, what range of discrete values do we need? 110db-10db = 100db = 100,000x greater amplitude than the pin drop. This means we need to be able to represent peak amplitude values of 1,600,000.

This exceeds the ability of 16 bits to losslessly represent the quiet 10db pin drop and 110db explosions within the same movie’s audio track! You would need at least 21 bits in this example. And I’ve been generous with my assumptions here, making the extreme assumption that even 4bits per sample is enough to record a 10db pin drop, which is clearly not enough.

If you think 110db is unrealistic for brief periods, it’s not, even for music: bass frequencies in particular can reach extreme amplitudes that might surprise you. I recently played an extremely well recorded orchestral piece at reference volume on my equipment and was so impressed by the dynamic range, I later measured the decibel levels (C-weighted). The quietest moments are around 65-70db, increases to 80-90db at times, and peaks several times momentarily to 105db when the bass drum hits (you feel it like a punch of an air wave)! It turns out this is exactly how real bass drums measure. Yet, the drum hit doesn’t sound unbearable loud (as treble would be at that decibel level), so much as tactile, because much of that energy is subsonic.

If you do much research into perceptual psychology studies, you’ll see just how surprisingly difficult it can be to completely pin down the limits of human perception on average, let alone including outliers among the human population. In that sense, it’s entirely reasonable that a durable high fidelity recording format that holds up to time should be over-engineered, so there’s at least no worry that some study will prove it’s missing something later.

That said, I don’t really agree with the parent post that most DACs are horrible, but I can’t comment on CD player DACs since I don’t use physical media. Most phone DACs are quite good. Most PC DACs are horrible not because of the DAC but because buzzing noises from system clocks and other sources always appear on my speakers (it’s very loud and noticeable), so I’m forced to use a cheap $20 external DAC, which quite frankly is nearly as good as anything else you’ll get at any price.

Re:Vinyl set to outsell CDs for first time since 1986 by guywhocodes on Monday September 09, 2019 @05:34AM (#20916590)
Last I checked it is 14bit. Very long time ago, but I'm very sure it used to be 14 and not sure if it is 16 now. Regardless I'm sure a lot older CDs have a quarter of the fidelity as a result
Re:Vinyl set to outsell CDs for first time since 1986 by projektfu on Monday September 09, 2019 @06:27AM (#20916848)
"There was a long debate over the use of 14-bit (Philips) or 16-bit (Sony) quantization, and 44,056 or 44,100 samples/s (Sony) or approximately 44,000 samples/s (Philips). When the Sony/Philips task force designed the Compact Disc, Philips had already developed a 14-bit D/A converter (DAC), but Sony insisted on 16-bit. In the end, 16 bits and 44.1 kilosamples per second prevailed. Philips found a way to produce 16-bit quality using its 14-bit DAC by using four times oversampling.[9]"

https://en.wikipedia.org/wiki/Compact_Disc_Digital_Audio#Aud...

Re:Vinyl set to outsell CDs for first time since 1986 by msla on Monday September 09, 2019 @04:34AM (#20916240)
CDs have better fidelity than vinyl.

Vinyl sounds more like vinyl than CDs do, until a specific piece of vinyl is reduced to a shambles by time.

People who really like vinyl have a bad habit of equivocating between the above two statements, using "better" to mean either "greater fidelity" (which is wrong) or "sounds more like vinyl" (which is a tautology) without signalling which meaning they mean.

https://wiki.hydrogenaud.io/index.php?title=Myths_(Vinyl)

Re:Vinyl set to outsell CDs for first time since 1986 by dagw on Monday September 09, 2019 @04:48AM (#20916305)
The other aspect is that, especially for older music (say anything recording over 30 years old), the CD master is often different than the Vinyl master. In some cases this difference in mastering can lead to people preferring the vinyl over the CD and claiming vinyl "sounds better", when in fact all it is is they prefer the way the vinyl was mastered.
Re:Vinyl set to outsell CDs for first time since 1986 by amaranth on Monday September 09, 2019 @08:32AM (#20917492)
The vinyl almost always has better mastering. CDs and digital audio in general still get mastered for the loudness war while vinyls are often mastered to have higher dynamic range. That'll make the CD sound better for radio or club play but the vinyl will sound better when you're listening at home.
Re:Vinyl set to outsell CDs for first time since 1986 by masklinn on Monday September 09, 2019 @06:51AM (#20916959)
IIRC that was one of the huge consequences of the loudness wars: you can't really master loud vynils, so they've avoided clipped mastering.
Re:Vinyl set to outsell CDs for first time since 1986 by electrograv on Sunday September 08, 2019 @08:56PM (#20914364)
I agree that if we’re pursuing sheer audio fidelity, CD quality is objectively superior to vinyl in every way. However (as others mention), many vinyl listeners are not after objective sound fidelity perfection: For them, the flaws are part of their “retro” charm.

However, one note about CD quality — it may not be as perfect as you think! A peer-reviewed meta-analysis has shown that humans can hear the difference between CD quality (44khz/16bit) and “high-res audio” recordings (e.g. 192khz/24bit)! The perceptual difference is relatively small, but measurable (assuming high quality speakers and signal chain):

https://phys.org/news/2016-06-people-difference-high-resolut...

I doubt 44khz sampling rate is a problem, but fixed point 16 bits per sample does seem fairly constraining, given how our perception of linear audio loudness corresponds to exponential increases in signal strength.

Also, if anyone tries to test it yourself, beware that it is actually quite hard to do so properly:

1. Any listening tests in a web browser will just resample to CD quality automatically anyway, because they just play into your OS’s shared audio mixing system, which mixes all audio sources before they reach your DAC, which usually resamples them all to CD quality in this process.

2. The above point applies to ANY app that doesn’t take exclusive control over your PC’s audio output capability, and even then there are many pitfalls where you can almost accidentally trigger a default CD quality resampling stage somewhere in the pipeline.

3. Be careful to ensure the audio file you’re playing wasn’t just a regular CD quality file that was simply upsampled to 192/24 or whatever high res rate it claims to be. Sadly, this happens a lot. Your audio file MUST be recorded AND mastered (edited) in the studio at every stage using high res formats.

4. Make sure your audio signal path doesn’t have any components introducing dynamic range (loudness) compression (many default to this, these days), or any other resampling, equalization, etc. stages.

5. Your DAC may not even support anything higher than 44/16 data streams, so resampling may be inevitable!

6. Make sure you played the audio samples on extremely high quality speakers (often costing many thousands of dollars, making this whole point moot/irrelevant for most people anyway). The vast majority of consumer headphones and speakers can’t render a low vs high bitrate MP3 very differently, let alone the subtle differences we’re talking about here.

Re:Vinyl set to outsell CDs for first time since 1986 by archontes on Monday September 09, 2019 @12:43AM (#20915252)
In addition to this, audio engineers mastering albums often have different masters for vinyl vs. CD resulting in different dynamic ranges.

It's not just a matter of reproduction. Humans make the products different.

Re:Vinyl set to outsell CDs for first time since 1986 by jacobush on Monday September 09, 2019 @04:41AM (#20916274)
THIS. A super crappy master mix for a CD vs a good mix for vinyl is the reality.

Look at the bottom of this page:

http://brianstagg.co.uk/p_t_a_clipressed/

Re:Vinyl set to outsell CDs for first time since 1986 by emcq on Monday September 09, 2019 @01:24AM (#20915397)
16 bits per sample can provide 96dB dynamic range [0].

If you were listening to music at that volume, it would generally be considered unsafe, and you would potentially have hearing loss beyond 37 minutes [1]

16 bits is plenty.

[0] https://en.m.wikipedia.org/wiki/Audio_bit_depth [1] https://www.cdc.gov/niosh/topics/noise/default.html

Re:Vinyl set to outsell CDs for first time since 1986 by stinos on Monday September 09, 2019 @07:33AM (#20917157)
You miss an important part of the sentence in the second link: "The NIOSH Recommended Exposure Limit (REL) for occupational noise exposure is 85 decibels, A-weighted".

dB expresses the ratio of one value to another. So without knowing what the other value is, it's rather meaningless. But it is unfortunately an often-made mistake: how many times haven't you heard or read just dB as such? Anyway, this means you cannot simply compare dB dynamic range with dB used to express sound pressure level of which 'A-Weighted' is just one standard which gets used. Those are completely different things. Simply said, you can play 96dB dynamic range music at sound pressure levels which you won't even hear. Or at sound pressure levels which damage your ears nearly instantly.

Re:Vinyl set to outsell CDs for first time since 1986 by C1sc0cat on Monday September 09, 2019 @07:11AM (#20917058)
I think you confusing Range with the loudness here - a good sound card like my Foucsrite Clarett has a range of up to 119 db.

And 96 to 119 is huge improvement.

Re:Vinyl set to outsell CDs for first time since 1986 by electrograv on Monday September 09, 2019 @11:08AM (#20918873)
As others have said, you appear to be confusing bit depth dynamic range for total loudness. They are related in a way, but not in the way you seem to think. (I will demonstrate to you below how even 20 bits per sample can be extremely insufficient.)

First: Bits per sample just describe how many discrete amplitude values (2^bits) are possible at each sample of a recording. The waveform is quantized to these values.

To understand quantization in the context of dynamic range, imagine how many bits per sample are needed to recreate a very quiet sound without loss, and then check how many bits you need to extend that to reach very loud sounds in the same recording file.

For example: How much precision would you need to accurately record the sound of a pin dropping (10db)? 4 bits? 8 bits? 10 bits? 12 bits?

Let’s be really absurd and say we can use 4 bits — just 16 discrete values — to represent a pin dropping sound (10db) cleanly and indistinguishable from the real thing. This is so obviously impossible, given how terribly quantized the waveform would be, but let’s be generous and assume it works.

Now, for the same audio file to reach all the way up to 110db (not uncommon for bass drum hits in an orchestra for example) is an extra 100db of dynamic range, which is 100,000x the amplitude, which is a little over 16 bits in addition to the original 4. So, rounding down, we’d need 20 bits to represent 10db sounds (with quantization down to only 16 discrete amplitudes) and 110db sounds in the same recording.

I think it’s extremely obvious that even 20 bits in this example is far from sufficient. In fact, even 24 bits would be insufficient if 8 bits per sample are not good enough to record a pin dropping at 10db!

Re:Vinyl set to outsell CDs for first time since 1986 by NobodyNada on Monday September 09, 2019 @12:17PM (#20919518)
> How much precision would you need to accurately record the sound of a pin dropping (10db)? 4 bits? 8 bits? 10 bits? 12 bits?

The absolute minimum threshold of human perception is about -8dB. 1 bit corresponds to about 6 dB of dynamic range, so the sound of a pin dropping at 10 dB can be represented perfectly within the limits of human hearing using only 3 bits.

Additionally, with proper dithering, the effective dynamic range of a 16-bit digital signal is around 120 dB. That's sufficient to reproduce everything from the -8 dB absolute quietest audible sound all the way up to your 110 dB bass drum.

See https://people.xiph.org/~xiphmont/demo/neil-young.html#toc_1... for a more detailed analysis.

Re:Vinyl set to outsell CDs for first time since 1986 by electrograv on Monday September 09, 2019 @01:33PM (#20920296)
Claiming that a 10db pin drop can be accurately reproduced with only 3 bits per sample without dithering is a rather extraordinary claim, given that human hearing is sensitive to far more than 8 levels of amplitude <= 10db absolute SPL.

A pin drop contains a continuous and gradual decay of the ringing over time, which most certainly is audible (at least subjectively) in more gradations than just 8 levels before reaching 0.

But this isn’t just subjective: Studies have confirmed that humans can hear decibel differences of 1db quite reliably, and can even hear as little as 0.2db subconsciously (this can be objectively measured)!

So long as you can hear a pin drop ringing at 1db, and also at 10db, it’s therefore obviously true that 3 bits per sample (undithered) is insufficient to express this (keep in mind, these samples are linear amplitudes!)

So I’m not sure how you can possibly claim that 3bits is enough to replicate the continuous amplitude decay of a pin drop’s ringing sound. What am I missing?

That’s said, I will now go read your link. I agree dithering is one viable way to expand the dynamic range, but you also seem to be claiming this 3bit pin drop is true without dithering.

Re:Vinyl set to outsell CDs for first time since 1986 by NobodyNada on Monday September 09, 2019 @02:01PM (#20920610)
I may be misunderstanding some of the math, but it's important to keep in mind that decibels are logarithmic. Adding 6 dB doubles the amplitude, which is why adding another bit to a digital audio format adds 6 dB of dynamic range.

Since we can't hear any sound quieter than -8 dB SPL, then (I think) we can't hear a difference smaller than the 6 dB between -8 and -2 dB because that difference is quieter than the threshold of human perception. Similarly, the next perceptible change in amplitude would be to +1.5 dB (3x the threshold of perception), then 4 dB (4x), 6 dB (5x), 7.6 dB (6x), 8.9 dB (7x), and 10 dB (8x).

So, since 10 dB is 8 times the threshold of human perception, I think eight discrete values should be enough to represent everything we can hear up to that point.

Of course, I'm assuming we can only hear in discrete increments of the minimum threshold of perception, -- it makes sense to me that we would be unable to hear a difference in amplitude quieter than the threshold -- but this could very well be a mistaken assumption. (It's also worth pointing out that 10 dB is very, very quiet -- the article I linked says 20 dB is the standard noise floor for a soundproof room/recording studio.)

Another way of thinking about this is in terms of quantization error. Our 3-bit pin drop signal can be interpreted as the original analog signal plus a quantization error, and that error is clearly always quieter than the minimum threshold of perception.

Edit: This article [0] contains a table for the minimum detectable difference in sound level. It shows that, at a level of 5 dB SPL, the just-noticeable difference in amplitude is 2.5 dB at the frequency range of peak sensitivity -- which is pretty close to the numbers I found based on discrete multiples of the absolute threshold. So it looks like 3 bits is indeed sufficient for our pin drop (unless I'm mistaken somewhere).

[0]: https://www.sciencedirect.com/topics/engineering/just-notice...

Re:Vinyl set to outsell CDs for first time since 1986 by electrograv on Monday September 09, 2019 @02:28PM (#20920889)
Firstly: I agree that with dithering, properly mastered CD quality should be more than enough in almost all cases. Yet, despite my agreement here, the meta-analysis I posted above clearly demonstrates that empirically we are both wrong! Obviously, it's bad to try to deny robust evidence just because our theories don't fit it; that's the opposite of scientific progress. Clearly, further investigation and possibly even theoretical adjustments will be required here, no matter how much we may believe we have had the math and psycho-acoustics nailed down.

I think there's a lot of subtlety being missed between dynamic range and resolution. For example, I think your JND (just noticeable difference) assumption is incorrect; my understanding of the scientific consensus is that a 1db difference at any volume is consciously perceivable to "normal" human hearing (and 3db to virtually all humans), and a 0.2db difference has been shown to be subconsciously perceivable by most. This places the required bit depth (not counting dithering) of an audio recording spanning all human perception WELL beyond 96db, and probably somewhere in excess of 120-140db! This is consensus, BTW; hence most CD-apologists people defer to the dithering argument :)

Also, I did finish reading that article up to the point about bit depth, and unfortunately there's quite a bit of either bad and misleading data in there unfortunately. While the article does contain some very good true info, it's sadly riddled with enough bad/outdated claims that I can't really recommend it to anyone as a reputable/trustworthy source of truth. It strikes me very much as if the author is unaware of how imprecise our approximate understanding of psycho-accoustics actually is, when it makes extremely overconfident claims like "CD quality will be enough FOREVER".

For example, the point made about near infrared being invisible to all humans is obviously false: most humans can't, but a certain percentage of blue-eyed humans can see near infra-red (including remote control IR). I've known one such person personally, and have tested and confirmed this thoroughly. I agree that it's silly to try to make a TV that emits these frequencies (and cameras that capture them), but my point here is simply: there's a lot of bad info in that article, perhaps shamefully so for an article making such bold and confident assertions under the name of "science".

Regarding bit depth, the article doesn't really even try to dispute the fact that 96db is insufficient; it just says with dithering, we shouldn't have to worry about it. I'd love to agree, but the combination of the meta-analysis that shows it's not sufficient is all I need to prove that your linked article is simply wrong.

There many be a wide range of reasons why the meta-analysis found high res audio to sound slightly better, but none of that invalidates the validity of the results themselves.

For example, maybe most DACs aren't very good at replicating dithered subtleties (I'm just speculating examples here) -- supposing such a common problem exists, then we could debate whether it makes more sense to improve DACs with fancy improvements to dither reconstruction filtering -- OR -- we could just encode at least 140db of dynamic range in the sample bit depth in the first place! The latter seems a far simpler and less-overengineered solution to me.

Dithering is fine when it works, but let's be honest: fundamentally, dithering is a kind of compression algorithm that encodes a greater dynamic range within a signal with an artificially constrained dynamic range (but with the side-effect that not all DACs will handle it equally well). In the modern digital world, there's no need to rely on dithering any more in audio signals, in the same way that we don't see dithered 256-color images much any more. Why don't we leave compression up to the compression algorithms, rather than promoting ACDs/DACs that are glorified compression/decompression hardware? Modern lossless compression algorithms are vastly better anyway, if bitrate savings is the goal.

Re:Vinyl set to outsell CDs for first time since 1986 by NobodyNada on Monday September 09, 2019 @03:37PM (#20921594)
> I think there's a lot of subtlety being missed between dynamic range and resolution. For example, I think your JND (just noticeable difference) assumption is incorrect; my understanding of the scientific consensus is that a 1db difference at any volume is consciously perceivable to "normal" human hearing (and 3db to virtually all humans), and a 0.2db difference has been shown to be subconsciously perceivable by most.

The Wikipedia article about JND seems to imply that the general 1 dB rule may not necessarily apply near the limits of perception. I haven't found a whole lot of more detailed information; however, the table I linked in the edit to my previous comment seems to indicate that the JND in dB gets much higher at very quiet volumes.

> For example, the point made about near infrared being invisible to all humans is obviously false: most humans can't, but a certain percentage of blue-eyed humans can see near infra-red (including remote control IR)

The article does mention that at some IR remotes can be visible:

> Can you see the Apple Remote's LED flash when you press a button? No? Not even the tiniest amount? Try a few other IR remotes; many use an IR wavelength a bit closer to the visible band, around 310-350THz. You won't be able to see them either. The rest emit right at the edge of visibility from 350-380 THz and may be just barely visible in complete blackness with dark-adjusted eyes. All would be blindingly, painfully bright if they were well inside the visible spectrum.

It has a footnote with more detailed information:

> The original version of this article stated that IR LEDs operate from 300-325THz (about 920-980nm), wavelengths that are invisible. Quite a few readers wrote to say that they could in fact just barely see the LEDs in some (or all) of their remotes. Several were kind enough to let me know which remotes these were, and I was able to test several on a spectrometer. Lo and behold, these remotes were using higher-frequency LEDs operating from 350-380THz (800-850nm), just overlapping the extreme edge of the visible range.

I don't have enough time or knowledge to really dive in to the scientific studies. That being said it's worth noting that a large number of studies that have found no perceptible difference between CD-quality and higher-resolution audio, and (as you mention) there are a lot of ways for minute hardware differences to skew the results either way.

> Dithering is a kind of compression algorithm that encodes a greater dynamic range within a signal with an artificially constrained dynamic range

Dithering does more than just expanding the dynamic range: it ensures that quantization error produces a predicable noise floor rather than input-dependent distortion. This video, by the author of the xiph.org article I linked before, has a good explanation and demonstration of dithering (use the chapter selection menu to skip to the "dither" section): https://xiph.org/video/vid2.shtml

Re:Vinyl set to outsell CDs for first time since 1986 by cosmotic on Sunday September 08, 2019 @09:55PM (#20914603)
Agreed; The default signal processing and lack of transparency on the sample rate and depth conversions through the whole system are a pretty frustrating aspect.

The dust/scratch factor of vinyl has a much bigger impact than 16 vs 24bit or much of the signal processing issues.

Re:Vinyl set to outsell CDs for first time since 1986 by microcolonel on Sunday September 08, 2019 @10:09PM (#20914663)
Do you know where to find the actual meta analysis that article is talking about? They mention the journal, but not the title. I'm not really sure what their criteria were.

To me, it would seem that in order to compare the two, you would basically need to resample the 24/192 recording, with dither, and then resample it back to 24/192; and you would need to choose a high quality resampling filter. Anything other than that I wouldn't really consider a comparison.

Furthermore, given that the measured sensitivity is more likely on the frequency front than on the dynamic range front, did they establish a distinction between 44.1kHz and 48kHz?

Re:Vinyl set to outsell CDs for first time since 1986 by ddeck on Sunday September 08, 2019 @11:49PM (#20915088)
Re:Vinyl set to outsell CDs for first time since 1986 by microcolonel on Monday September 09, 2019 @01:04AM (#20915338)
Thank you! It really is interesting, it seems like there's an opening for a better-designed experiment. Wonder if there's anyone at the local universities interested in that sort of thing.
Re:Vinyl set to outsell CDs for first time since 1986 by TheSpiceIsLife on Sunday September 08, 2019 @10:05PM (#20914650)
> durable ... Oh, the CD!

In my experience CD’s are anything but durable.

Re:Vinyl set to outsell CDs for first time since 1986 by alanbernstein on Sunday September 08, 2019 @11:57PM (#20915114)
I think "durable" here means "can be read without physically damaging the media".
Re:Vinyl set to outsell CDs for first time since 1986 by TheSpiceIsLife on Monday September 09, 2019 @01:49AM (#20915510)
Ah, right, yeah, good point, that I can agree with.
Re:Vinyl set to outsell CDs for first time since 1986 by jonhohle on Sunday September 08, 2019 @10:39PM (#20914795)
I have CDs from the early 90s that still play fine. I have vinyl from the 70s that plays fine as well. I can resurface the CDs, not so much the vinyl.
Re:Vinyl set to outsell CDs for first time since 1986 by Godel_unicode on Sunday September 08, 2019 @10:49PM (#20914836)
You can also make an infinite number of perfect replicas of your CDs. You can carry backups of every CD ever made on a flashdrive that fits in your jeans pocket, then recreate any of them at any time with no degradation in quality.

There are some quasi-plausible arguments for vinyl, but arguing that durability is one of them is hilariously myopic.

Re:Vinyl set to outsell CDs for first time since 1986 by tzs on Monday September 09, 2019 @12:56AM (#20915301)
> You can carry backups of every CD ever made on a flashdrive that fits in your jeans pocket

Gracenote had 3 598 785 CDs in their database in 2005 [1], so I'll take that as a lower bound on the number of CDs ever made.

I don't know what the largest flash drive that will fit in a jeans pocket is, but the largest I was able to find is 2 TB, but SanDisk showed a 4 TB prototype at CES 2019, so I'll go with that.

Assuming lossless compression that averages reducing the size of a song by 75%, a 4 TB flash drive could hold 1 662 149.1 minutes of music.

Unless the average CD is under 27.7 seconds long, that's not even enough to hold all the CDs known to Gracenote in 2005.

Anyone want to do the math if we allow lossy compression to squeeze more in (although I wouldn't consider it a backup of the CDs if lossy)?

[1] http://alchemi.co.uk/archives/mus/how_many_cds_ar.html

Re:Vinyl set to outsell CDs for first time since 1986 by filleokus on Monday September 09, 2019 @07:54AM (#20917274)
If we move the goal post slightly, we could perhaps conceivably fit all 3.5 million CDs (compressed losslessly) on micro SD cards that would fit inside of the volume of a jewel CD case:

https://www.wolframalpha.com/input/?i=177.5+cm%5E3%2F%28%28%...

Re:Vinyl set to outsell CDs for first time since 1986 by isostatic on Monday September 09, 2019 @08:59AM (#20917677)
https://www.theverge.com/circuitbreaker/2018/2/20/17031256/w...

That'll fit in my pocket, so that's 240 million megabit, 160 million seconds, or 2.7 million minutes, about 1 million songs. OK not every song ever, but a good portion, and possibly every song that's been in the charts.

I did see one claim that there had been as many as 100 million songs ever recorded, which would mean the density won't be there fore another 15 years or so.

An average person can expect to live upto about 2.5 billion seconds, which requires (for stereo 44.1khz 16 bit), about 220TB - 2.7TB a year. Given the growth of storage, you could record everything you hear from now to forever, keeping it in your pocket.

Re:Vinyl set to outsell CDs for first time since 1986 by jacquesm on Monday September 09, 2019 @02:17AM (#20915618)
Storage capacity has been increasing much faster than new CD volume is being created (relatively speaking), so if it isn't true today it soon will be.
Re:Vinyl set to outsell CDs for first time since 1986 by andybak on Monday September 09, 2019 @05:43AM (#20916632)
Perceptually lossless and mathematically lossless are two different things. I'd be happy with the former.
Re:Vinyl set to outsell CDs for first time since 1986 by Semaphor on Monday September 09, 2019 @07:53AM (#20917267)
But for a backup, you’d want actual lossless compression, wouldn’t you? Not for listening, but for re-encoding.
Re:Vinyl set to outsell CDs for first time since 1986 by andybak on Sunday September 15, 2019 @05:15AM (#20976317)
I think it's something I could tolerate sacrificing if the storage gains were substantial.
Re:Vinyl set to outsell CDs for first time since 1986 by optimiz3 on Sunday September 08, 2019 @11:53PM (#20915104)
Sort of - sometimes there's sub-channel data that is very hard to properly replicate; only certain drives even expose that data to correctly extract. Making perfect audio CD image archives is surprisingly hard.

E: Specifically I'm talking about the P & Q channels, but this can also include R through W which while technically unused, still contain data in some form.

Re:Vinyl set to outsell CDs for first time since 1986 by paublyrne on Monday September 09, 2019 @12:16AM (#20915169)
What do you mean by "sub-channel"?
Re:Vinyl set to outsell CDs for first time since 1986 by optimiz3 on Monday September 09, 2019 @01:06AM (#20915342)
https://en.wikipedia.org/wiki/Compact_Disc_subcode

Most audio CD extractors do not provide all of this channel data, as only the digital audio is extracted. When a CD is re-burned, the subchannel data is regenerated, but not a bit-for-bit copy of the original. Sounds the same (usually), but sometimes there is metadata, easter-eggs, and what-not that is omitted. Additionally, some copy protection relied on adding corrupted subchannel data which low end CD players would skip, but high end extractors would not. Having the original subchannel data can be key and necessary to determine whether a sector was infact incorrectly extracted or not.

Re:Vinyl set to outsell CDs for first time since 1986 by LegitShady on Monday September 09, 2019 @12:40AM (#20915245)
Re:Vinyl set to outsell CDs for first time since 1986 by lightedman on Sunday September 08, 2019 @10:55PM (#20914859)
I have CDs from the 80s and 90s that are eaten by metal-eating bacteria. Good luck resurfacing that layer.
Re:Vinyl set to outsell CDs for first time since 1986 by r_c_a_d on Monday September 09, 2019 @06:56AM (#20916985)
Try contacting the original publisher. I did this with the small number of my discs that "rotted" and they were replaced with brand new ones without question. Probably because the industry made such a big deal about them "lasting forever" at the time of release. One disc was not replaceable (it was a weird compilation album that was no longer available) but the publisher let me pick another disc from their catalogue instead.
Re:Vinyl set to outsell CDs for first time since 1986 by TheSpiceIsLife on Sunday September 08, 2019 @10:47PM (#20914822)
If we’ve got data, let’s go with the data.

If all we’ve got is opinions, let’s go with mine:

None of the CDs I’ve ever bought still works. I’m probably not as careful with my things as you are, so there’s that.

Re:Vinyl set to outsell CDs for first time since 1986 by jonhohle on Sunday September 08, 2019 @10:58PM (#20914872)
Your original comment was of your experience, so I shared mine.

Unfortunately, due to manufacturing defects there are discs that will or have oxidized, so the durability of CDs (or other optical media) is not always as reliable as advertised. But as the sibling post to yours points out, CDs provide error correction and along with oversampling provides means of creating effectively bit perfect copies that can be as durable as the current state of the art (redundant, solid state, geographically diverse, etc.)

Re:Vinyl set to outsell CDs for first time since 1986 by cosmotic on Tuesday September 10, 2019 @12:47AM (#20925114)
If you look at the side of a CD, nearly all of that clear plastic you see is the protective layer. You can (or at least could) purchase a device to shave off a very thin layer of plastic to remove all the scratches on the surface to resurrect the disk.
Re:Vinyl set to outsell CDs for first time since 1986 by deadbunny on Monday September 09, 2019 @08:51AM (#20917617)
CDs are durable and don't need special handling? Pull the other one.
Re:Vinyl set to outsell CDs for first time since 1986 by bitwize on Monday September 09, 2019 @04:11PM (#20921932)
Sorry, but if you want your music to sound like God, it's analog from mic to speakers or GTFO.
Re:Vinyl set to outsell CDs for first time since 1986 by voldacar on Monday September 09, 2019 @12:24AM (#20915196)
What does this comment add to the conversation here?