For anyone who is interested in setting up their own LTE base station (which can be legal, btw) consider the LimeSDR Mini [1]
Oh, and learning ethernet cables are a monstrous power draw and you're much better off using wifi for everything.
I mean, yeah it's cool to have. But I can't help but feel like it's a bit trivial.
Without doing any analysis at all, I suspect the idle behaviour is a big difference; Wifi goes silent if there's no traffic, apart from AP beacons, but Ethernet continuously transmits "fast link pulses" every 16 miliseconds to maintain autonegotiation and detect connection lost.
That might be unique to the RPi hardware I used. It might not.
Maybe I should have written that article. :)
If the ethernet cable is disconnected, that chip mostly powers down.
I think it's a Pi related thing rather than being inherent to Ethernet. In fact, if I were to guess, the energy per bit per meter of ethernet is probably far far lower than WiFi.
I confess I screwed up on the battery choices more times than I care to admit.
https://www.raspberrypi.org/documentation/installation/insta...
https://pimylifeup.com/raspberry-pi-wifi-bridge/
Secondly, I hoped it was about the using the LTE dongle in modem mode via vwdial (or similar) rather than in RNDIS/network interface mode.
E3372 can be reflashed to do this.
This is more akin to building a basic consumer all-in-one router -- which I think actually sounds cooler.
So the pieces that this article puts together:
* Bridging the Pi's ethernet and wireless interface and setting up DHCP pointing to a forwarding DNS server on the bridge with dnsmasq.
* Setting up Linux IP forwarding and the iptables rules needed to perform NAT over the WAN.
* Setting up a wireless access point on the Pi with hostapd.
It really is super cool that for $35 and an hour you can have a functioning, albeit not super fast, router that's basically ready to be plugged into a modem and work.