News for hackers. Stuff that matters.
Re:Building an LTE Access Point with a Raspberry Pi by KirinDave on Sunday June 23, 2019 @08:25PM (#20259597)
Yeah, I did this myself not long ago as part of a mobile office rig and ... I didn't write about it or share about it becuase it was mostly just putting USB male connectors into USB female connectors and sourcing the right kind of batteries to charge things.

Oh, and learning ethernet cables are a monstrous power draw and you're much better off using wifi for everything.

I mean, yeah it's cool to have. But I can't help but feel like it's a bit trivial.

Re:Building an LTE Access Point with a Raspberry Pi by voltagex_ on Monday June 24, 2019 @12:35AM (#20260585)
Can you comment on Ethernet being more power hungry than Wifi? That's the first time I've heard that.
Re:Building an LTE Access Point with a Raspberry Pi by eigenloss on Monday June 24, 2019 @12:43AM (#20260614)
Ethernet usually requires isolation magnetics and transformers, while WiFi is basically just a wire sticking out of an RFIC.
Re:Building an LTE Access Point with a Raspberry Pi by pjc50 on Monday June 24, 2019 @07:59AM (#20262597)
It's not so much that the transformers consume more power than just radiating it into the air, but that Ethernet is not designed with power efficiency as a goal. Ethernet devices that need more power usually get it from PoE instead.

Without doing any analysis at all, I suspect the idle behaviour is a big difference; Wifi goes silent if there's no traffic, apart from AP beacons, but Ethernet continuously transmits "fast link pulses" every 16 miliseconds to maintain autonegotiation and detect connection lost.

Re:Building an LTE Access Point with a Raspberry Pi by KirinDave on Monday June 24, 2019 @06:56PM (#20269393)
Honestly I dunno why it was the case for me. What I know is that I thought I'd save power pushing pulses over copper rather than using a radio. I didn't. In fact it was consistently about 40% worse than wifi.

That might be unique to the RPi hardware I used. It might not.

Maybe I should have written that article. :)

Re:Building an LTE Access Point with a Raspberry Pi by londons_explore on Monday June 24, 2019 @07:38PM (#20269671)
The Pi does Ethernet with a seperate and pretty power hungry chip.

If the ethernet cable is disconnected, that chip mostly powers down.

I think it's a Pi related thing rather than being inherent to Ethernet. In fact, if I were to guess, the energy per bit per meter of ethernet is probably far far lower than WiFi.

Re:Building an LTE Access Point with a Raspberry Pi by Mary-Jane on Sunday June 23, 2019 @10:29PM (#20260057)
Everyone's gotta start somewhere.
Re:Building an LTE Access Point with a Raspberry Pi by KirinDave on Monday June 24, 2019 @01:59AM (#20260860)
True.

I confess I screwed up on the battery choices more times than I care to admit.