I needed to dissolve(ha!) fluorite once. You can get it started by adding a few drops of conc H2SO4 to your beautiful aqua regia solution. It goes deeper red, some happy bubbles appear, and as long as it stays put, makes it's own "aqua nasty"(pg88) as you gently add your powdered sample.
I thought AQR+SA was called aqua nasty, but I cant get any hits other than this AA pdf with explicit HF added. Maybe an actual chemist can chime in, is there another name for the aqua regia +H2SO4 mix?
https://archive-resources.coleparmer.com/Manual_pdfs/28750-1...
Oil of vitriol is sulfuric acid. This was also quite a logical name at the time - it's an oily liquid that was made from vitriol (a common term for a class of brightly colored metal sulfate crystals).
So, in the reaction given, when the sulfuric acid is added to saltpeter (potassium nitrate), the sulfate ion swaps places with the nitrate ion and you instead get nitric acid and potassium sulfate.
Source: Have spent far, far too much time researching alchemical nomenclature because I thought it was cool.
disturbing that we know this
Unfortunately, I found out about it because of a now-deceased friend who succumbed to alcoholism. Near the end, he would drink rectally, since his esophagus was effectively destroyed. Also, since there's no gag reflex to keep you safe, this way is one of the easiest ways to kill yourself with alcohol.
INHALATION
Estimates of the lowest lethal concentrations for hydrogen fluoride range from 50-250 ppm for 5-minute exposure and are based on accidental, ***voluntary*** and occupational exposure information.
Someone volunteered to be exposed to this stuff??I was hoping that with 50 years of development behind us, the home fabricators could use less complex methods and less hazardous chemicals. In other words, can the folks who lived it help people like this by saying "If we had to do it over, I'd go about it like...."
Any suggestions? If you had to reboot the chip fab business on a budget what would be a more practical approach?
or is this a stepper? or scanning electron microscope?
What are they?
Yes Gordon Moore created a superfund site or two in California.
The HF monster everyone is talking about in this thread is dangerous only as a concentrated acid. It's highly soluble -- reduce it with a rainstorm or two and let it recombine to a neutral pH and you rapidly get to (literally!) toothpaste-level toxicity.
There's a VERY serious discussion to be had about the safety for a backyard chip fabricator. But the idea that this is some kind of long term pollutant (relative to much more serious issues like the cleaning solutions in your very own closet!) is pretty spun.
Edit: yeah, as the responses point out, the "superfund" sites in question are things like VOC contamination you see with any urban industry, nothing particular to semiconductor fabrication that would justify the upthread quote about contamination "for many generations to come".
Intel superfund site #2: https://cumulis.epa.gov/supercpad/cursites/csitinfo.cfm?id=0...
Intel superfund site #3: https://cumulis.epa.gov/supercpad/cursites/csitinfo.cfm?id=0...
https://www.bloomberg.com/news/features/2017-06-15/american-... (cites the main source that is no longer on the web)
https://www.youtube.com/watch?v=hrtyUnad7Jo (audio from the interview)
Despite the quote, what a lot of people question is Gordon Moore's ignorance. He has a PhD in chemistry afterall.
There’s a generation or two of chemists, pharmacists, etc who habitually mouth pipetted common lab solvents that we now know to be carcinogenic.
As early as 1969 chemists were identified as having increased cancer risk
Intel graciously paid for trees to brighten up the street and has a nice street sign saying so. (It doesn’t say why they did.)
This one is not directly related to silicon production, but the QA that came after.
http://www.aarongreenspan.com/writing/20130404/in-search-of-...
Lot's of information about the situation in that article. TL;DR: Palo Alto is a toxic cesspit.
If you are a scientist, and not in a sciency-y setting (lab), have a laminated clipboard stating chemical threats, electrical threats, biogenic threats, and particulate threats.
You may end up killing yourself. If you do, you did so in the name of science. Please, don't have others die because you failed to properly notify first responders of a threat.
Nasty stuff — the wisdom promoting garage stuff like this is questionable. :)
https://en.wikipedia.org/wiki/Hydrofluoric_acid#Health_and_s...
http://blogs.sciencemag.org/pipeline/archives/2008/02/26/san...
> The compound also a stronger oxidizing agent than oxygen itself, which also puts it into rare territory. That means that it can potentially go on to “burn” things that you would normally consider already burnt to hell and gone, and a practical consequence of that is that it’ll start roaring reactions with things like bricks and asbestos tile. It’s been used in the semiconductor industry to clean oxides off of surfaces, at which activity it no doubt excels.
> There’s a report from the early 1950s (in this PDF) of a one-ton spill of the stuff. It burned its way through a foot of concrete floor and chewed up another meter of sand and gravel beneath, completing a day that I’m sure no one involved ever forgot. That process, I should add, would necessarily have been accompanied by copious amounts of horribly toxic and corrosive by-products: it’s bad enough when your reagent ignites wet sand, but the clouds of hot hydrofluoric acid are your special door prize if you’re foolhardy enough to hang around and watch the fireworks
Here's a video of some French people introducing the substance to things like a rubber glove and leather:
http://blogs.sciencemag.org/pipeline/archives/2013/04/05/chl...
TL;DW: FIRE!
"The straight liquid must really be a treat, but I’ve never seen it in that form, and would only wish to through binoculars."
The amount in household products is essentially zero and one drop of the pure stuff and you are gone..
this stuff is nightmare material, i know, i have worked with and around it.
70% pure accident..
PFF http://www.ehs.ucsb.edu/files/docs/ls/HF_fatality.pdf
HTML http://www.geo.utexas.edu/geosafety/hf-accident.html
10% strength MSDS
HTML http://www.kendon.com.au/Catalogue/MSDS/Industrial/10%25Hydr...
Since this product is commonly available at hardware stores across the United States, why should comments related to it "be deleted because it is so dangerous"?
I agree that HF can be extremely dangerous, but in this case it's not clear that Sam is working with or advocating use of dangerous concentrations or chemcial forumulations of fluorine-based acids. Maybe I missed a post where he does discuss using more dangerous concentrations or compounds?
Good to see the (not so out of place) note about conc HF. They claim <0.5%. I would treat it with respect. Getting it on your skin is a bad idea.
And that you're wearing a chemical protection suit with respirator while playing with it. And that you are well aware of wind and weather conditions. And that you take care to keep it out of the environment.
Seems like one of those things that would be more dangerous to the wielder than anyone else.
Can you do this in a garage? Absolutely, but learn everything you need to know from an ensemble of safety-minded mentors before you strike out on your own.
It's not just about safety for you, proper disposal of these chemicals is essential for the many generations to come. Sometimes it is inexpensive, sometimes it is costly. You need to know how before you start, or it costs a lot more.
(Also, you can get someone else to pay for the hardware, the infrastructure, the material, the resists, the reagents, the safety training, and the waste disposal if you work/volunteer at a university's photolithography facility. They'll probably pay you, too.)