News for hackers. Stuff that matters.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by k__ on Tuesday April 10, 2018 @11:09AM (#16801891)
I remember the switch to CD was huge.

1995 I got Lands of Lore (the LoL of our time, hehe) from my uncle in a box of 5-10 floppy disks.

1997 I got one CD with about 20-30 games like WarCraft, Doom, Command&Conquer etc.

It was orders of maginitude bigger than what I was used to and only a few times smaller than my 2GB HDD at that time.

I only got that feeling again with my USB3 drive I bought 3 years ago that was 128GB big.

On the other hand it took a bunch of years till I could get my hands on a used CD burner, because they were so expensive and only a few kids at school could copies, most of them taking around $10 for a copy.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by kh_hk on Tuesday April 10, 2018 @11:15AM (#16801943)
About CD burners, I remember sharing one with a friend from the same building I was living, by encasing it on an external SCSI box. 4x speed, no less! It took me a while to realize that walking around on my room whilst burning a CD produced corrupted copies.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by jandrese on Tuesday April 10, 2018 @12:05PM (#16802386)
I had one that required you to put the disc in a plastic caddy first. Only 1x speed though. Burning from Windows was too unreliable, some interrupt might fire and ruin the disc, you had to drop down to DOS and make sure there weren't any TSRs running, and heaven forbid someone touch your computer while the burn was running. Those CD blanks were expensive. I didn't make too many coasters at least, and they were usually my fault.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by k__ on Tuesday April 10, 2018 @11:35AM (#16802114)
haha, yes!

I had a 4x speed used CD burner I got from a friend too.

It had a 80% success rate.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by Symbiote on Tuesday April 10, 2018 @12:21PM (#16802534)
I used the CD ROM drive attached to a computer at my dad's school, around 1994. I think the computer's hard disk was about 200MB, I remember wondering how they put the data in one place to assemble the CD ROM.

(And yes, back then it was always "see dee rom ".)

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by bitwize on Tuesday April 10, 2018 @12:23PM (#16802554)
> 1997 I got one CD with about 20-30 games like WarCraft, Doom, Command&Conquer etc.

Good old Walnut Creek CDROM.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by digi_owl on Tuesday April 10, 2018 @03:46PM (#16804573)
I wonder if i still have the stack of cover CDs i accumulated during a lonely student year (resulted in a deep seated appreciation for the flexibility of Quake1's Quake-C).

I also recall that i developed a habit of making my own utility collection discs once i got a modem and a net connection, to avoid having to download all the various shareware and stuff i invariably found missing after a Windows install.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by k__ on Tuesday April 10, 2018 @05:16PM (#16805524)
Same here, back in the days when stuff wasn't outdated every week :D
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by FooHentai on Tuesday April 10, 2018 @07:04PM (#16806434)
ftp.cdrom.com was such an amazing resource, especially /idgames/. Dialling up 56k and jumping to /incoming/ to see what had just arrived was really fun in it's heyday.

There's a kinda archive available on https://archive.org/details/walnutcreekcdrom

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by k__ on Tuesday April 10, 2018 @12:55PM (#16802874)
Haha, didn't know how it was called.

I got it two times from different friends on different CDs.

Often it was just called "The Game-CD from <FRIENDS_NAME>"

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by sebtoast on Tuesday April 10, 2018 @12:31PM (#16802655)
>Lands of Lore (the LoL of our time, hehe)

Thank you, I was looking for the name of that game for at least ten years.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by k__ on Tuesday April 10, 2018 @12:42PM (#16802768)
The RPG of my time, haha.

You should look into Legend of Grimrock if you want something more up to date :)

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by sebtoast on Tuesday April 10, 2018 @12:50PM (#16802832)
Thank you, I didn't expect to find a modern game with that gameplay style.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by digi_owl on Tuesday April 10, 2018 @11:43AM (#16802194)
Heh, i ruined someones money making scheme the day i got my first burner and offered copies at the cost of a blank CDR.

Somewhat sad that MO media didn't pick up any steam though, as i kinda miss the day when i could do random RWs on a completely passive media (meaning all the logic lived in a fully replaceable drive).

optical discs don't really do RW in the same way as a floppy, HDD or flash chips, but the latter two have a whole lot of embedded logic stuff that can go sour even if the actual storage media is just fine.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by k__ on Tuesday April 10, 2018 @12:59PM (#16802910)
Yes, we got some kids later that did this too.

First there were a few that used their parents burner.

Later some got their own burners and did it for the cost of a blank CDR.

The prices of the CDRs dropped too, first I paid like $10 for one and later I got 50 for like $50.

Funny thing was, at the beginning the burning was unreliable and the CDRs expensive. Later when they got cheaper the burners also got more reliable.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by astrodust on Tuesday April 10, 2018 @02:34PM (#16803845)
There was a great ceremony when burning in the single-speed days where the hard drive could barely keep up. Vibration, buffer underruns, loud noise, they could all trash your burn. You'd set it, then watch, on the edge of your seat, hoping it'd succeed. Then you'd carefully hand this golden artifact to the next person.

Later you'd burn a single PSD on a CD-ROM because it's almost cheaper, faster, and more reliable than printing it out.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by scarface74 on Tuesday April 10, 2018 @11:47AM (#16802247)
My first CD burner was around 1998. It used a parallel port and I used it with a laptop. Now that I think about it, I still had a PowerMac back then with SCSI. I don't know why I didn't get a SCSI based CD burner. Also, why didn't they have USB based burners back then?
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by WorldMaker on Tuesday April 10, 2018 @11:58AM (#16802331)
In 1998, most machines barely had USB 1.0 support, much less USB 1.1 support. While USB 1.1 supported up to 15 Mbit/s "full speed", most systems at that time were still only average the 1.5 Mbit/s "low speed", which is just enough to burn a CD at 1X (and I certainly remember how slow 1X seemed; I was quite proud of the 16X burner I had at one point in HS).

https://en.wikipedia.org/wiki/USB

https://en.wikipedia.org/wiki/CD_and_DVD_writing_speed

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by jandrese on Tuesday April 10, 2018 @12:08PM (#16802415)
Back in the mid 90s USB was way too new and unreliable to be trusted to burning optical media. Burners were mostly PATA (ATAPI), or SCSI. There were also some hacks that ran over a Parallel Port, but those seemed like a bad idea to me. SCSI burners were the most reliable, but PC SCSI cards weren't so great. The only one that seemed worthwhile at the time was the Adaptec 2940. Sadly, the SCSI tax was in full force so you paid through the nose for somewhat reliable burns.

The USB situation was a bit better in the late 90s (98-99), but even then it was a nontrivial source of blue screens.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by digi_owl on Tuesday April 10, 2018 @01:28PM (#16803190)
Funny thing about ATAPI is that it is basically SCSI wrapped by ATA (IDE).

https://en.wikipedia.org/wiki/ATA_Packet_Interface

BTW, anyone old enough to remember wrestling with IDE cables without notches? Meaning you had to figure out the orientation of them via the one marked wire at one edge of the ribbon?

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by k__ on Tuesday April 10, 2018 @05:13PM (#16805488)
lol, I even put my CPU in wrong once, because they where square
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by agumonkey on Tuesday April 10, 2018 @03:30PM (#16804400)
I gave up and spent some money on a pair of SCSI TEAC drives (reader and writer). My poor P2 could now burn audio cd on the fly.. no need for pre processing. So smooth.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by paulmd on Tuesday April 10, 2018 @04:26PM (#16804983)
I still have an Adaptec AHA-2940 that I use for running a Polaroid Sprintscan 45 Ultra film scanner because as far as I can tell it's the only SCSI cards with drivers that work on anything newer than Win XP.

Unfortunately, replacing that scanner with anything remotely equivalent that can do 4x5 would be at least several thousand dollars so... SCSI it is.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by rasz on Wednesday April 11, 2018 @07:21AM (#16809979)
This is wrong :( Wiki had wrong info for a long time, more at http://www.os2museum.com/wp/how-fast-again/

USB 1.0 already had both 1.5 Mbit/s "Low Speed" and 12 Mbit/s "Full Speed" modes.

Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by jfoucher on Wednesday April 11, 2018 @08:58AM (#16810636)
Time to come clean about my first CD burner story I guess. In 1998 they were pretty common already but I was a poor student in a foreign country so could not afford one. Office Depot (I think that's what it was called) had a good return policy, so the scheme was as follows : I would buy the CD burner and a friend would return it a few days later. Only the box would contain my old plain cd rom drive and not the burner. We relied on the incompetence of the Office Depot staff and hope they would not recognize the difference. Why was my friend to return it then ? Well simply because he could claim ignorance of the matter in case they discovered the swap, and I could later choose to return the real CD burner or keep it, depending on my finances. Well as it turned out the staff were really as useless as we had hoped and we burned many, many cds in the months thereafter. (Most of which came from HMV which also had a pretty good return policy until they caught on) So hmv and Office Depot there you have it : my sincere apology for my youth mistakes !
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by 0x0 on Tuesday April 10, 2018 @11:59AM (#16802343)
USB 2.0 came out in 2000, I don't know if USB 1.1 would be capable of driving a CD-R reliably?
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by user5994461 on Tuesday April 10, 2018 @05:25PM (#16805603)
Very unlikely. The minimum speed of the CD burner is roughly the maximum speed of the USB port.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by rasz on Wednesday April 11, 2018 @07:26AM (#16810023)
Without breaking up a sweat. USB 1.0 is >1MB/s, CD x1 speed is 150KB/s.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013) by agumonkey on Tuesday April 10, 2018 @03:28PM (#16804375)
When the burner mania reached my country, I made so many lists of games to be compiled on a cd (to give to my nerd guru of the day in hope he would satisfy my wish).