Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by scarface74 on Tuesday April 10, 2018 @11:47AM
(#16802247)
My first CD burner was around 1998. It used a parallel port and I used it with a laptop. Now that I think about it, I still had a PowerMac back then with SCSI. I don't know why I didn't get a SCSI based CD burner. Also, why didn't they have USB based burners back then?
[ Parent
| on HN ]
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by WorldMaker on Tuesday April 10, 2018 @11:58AM
(#16802331)
In 1998, most machines barely had USB 1.0 support, much less USB 1.1 support. While USB 1.1 supported up to 15 Mbit/s "full speed", most systems at that time were still only average the 1.5 Mbit/s "low speed", which is just enough to burn a CD at 1X (and I certainly remember how slow 1X seemed; I was quite proud of the 16X burner I had at one point in HS).
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by jandrese on Tuesday April 10, 2018 @12:08PM
(#16802415)
Back in the mid 90s USB was way too new and unreliable to be trusted to burning optical media. Burners were mostly PATA (ATAPI), or SCSI. There were also some hacks that ran over a Parallel Port, but those seemed like a bad idea to me. SCSI burners were the most reliable, but PC SCSI cards weren't so great. The only one that seemed worthwhile at the time was the Adaptec 2940. Sadly, the SCSI tax was in full force so you paid through the nose for somewhat reliable burns.
The USB situation was a bit better in the late 90s (98-99), but even then it was a nontrivial source of blue screens.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by digi_owl on Tuesday April 10, 2018 @01:28PM
(#16803190)
Funny thing about ATAPI is that it is basically SCSI wrapped by ATA (IDE).
https://en.wikipedia.org/wiki/ATA_Packet_Interface
BTW, anyone old enough to remember wrestling with IDE cables without notches? Meaning you had to figure out the orientation of them via the one marked wire at one edge of the ribbon?
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by k__ on Tuesday April 10, 2018 @05:13PM
(#16805488)
lol, I even put my CPU in wrong once, because they where square
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by agumonkey on Tuesday April 10, 2018 @03:30PM
(#16804400)
I gave up and spent some money on a pair of SCSI TEAC drives (reader and writer). My poor P2 could now burn audio cd on the fly.. no need for pre processing. So smooth.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by paulmd on Tuesday April 10, 2018 @04:26PM
(#16804983)
I still have an Adaptec AHA-2940 that I use for running a Polaroid Sprintscan 45 Ultra film scanner because as far as I can tell it's the only SCSI cards with drivers that work on anything newer than Win XP.
Unfortunately, replacing that scanner with anything remotely equivalent that can do 4x5 would be at least several thousand dollars so... SCSI it is.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by rasz on Wednesday April 11, 2018 @07:21AM
(#16809979)
This is wrong :( Wiki had wrong info for a long time, more at http://www.os2museum.com/wp/how-fast-again/
USB 1.0 already had both 1.5 Mbit/s "Low Speed" and 12 Mbit/s "Full Speed" modes.
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by jfoucher on Wednesday April 11, 2018 @08:58AM
(#16810636)
Time to come clean about my first CD burner story I guess. In 1998 they were pretty common already but I was a poor student in a foreign country so could not afford one. Office Depot (I think that's what it was called) had a good return policy, so the scheme was as follows : I would buy the CD burner and a friend would return it a few days later. Only the box would contain my old plain cd rom drive and not the burner. We relied on the incompetence of the Office Depot staff and hope they would not recognize the difference. Why was my friend to return it then ? Well simply because he could claim ignorance of the matter in case they discovered the swap, and I could later choose to return the real CD burner or keep it, depending on my finances. Well as it turned out the staff were really as useless as we had hoped and we burned many, many cds in the months thereafter. (Most of which came from HMV which also had a pretty good return policy until they caught on)
So hmv and Office Depot there you have it : my sincere apology for my youth mistakes !
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by 0x0 on Tuesday April 10, 2018 @11:59AM
(#16802343)
USB 2.0 came out in 2000, I don't know if USB 1.1 would be capable of driving a CD-R reliably?
Re:The Dawn of PC Multimedia: Laser Discs and CD-ROMs (2013)
by user5994461 on Tuesday April 10, 2018 @05:25PM
(#16805603)
Very unlikely. The minimum speed of the CD burner is roughly the maximum speed of the USB port.