News for hackers. Stuff that matters.
Re:Can you get 32 level grayscale out of an E-ink display? by userbinator on Saturday January 13, 2018 @12:53PM (#16140412)
E-inks are fundamentally analog, so theoretically you could have as many shades of gray as your timing resolution allows, but basically all the commercial controllers available abstract the display as a dumb framebuffer so you can't really access their fundamental operation of "make this pixel slightly whiter or darker.
Re:Can you get 32 level grayscale out of an E-ink display? by Dylan16807 on Saturday January 13, 2018 @10:18PM (#16142659)
Timing plus calibration plus unpredictability on the color change speed. Overdriving is a lot easier than subtle and consistent analog performance.
Re:Can you get 32 level grayscale out of an E-ink display? by dfox on Saturday January 13, 2018 @05:55PM (#16141848)
That depends on what you exactly mean by "controller". The hardware controller typicaly has capability of exposing selected pixels to essentially arbitrary voltage level for specified amount of time and the framebuffer abstraction happens on the driver level.
Re:Can you get 32 level grayscale out of an E-ink display? by userbinator on Saturday January 13, 2018 @11:31PM (#16142811)
The majority of dev kits and modules available abstract away that level and provide something not unlike a regular LCD where you just send it raster images; the driving waveforms etc. which are needed to do effects like this are abstracted away, and the details are kept secret.
Re:Can you get 32 level grayscale out of an E-ink display? by TeMPOraL on Sunday January 14, 2018 @09:14AM (#16144311)
Any examples? I've only played with Waveshare screens/drivers a little, but I'm pretty sure I saw the LUTs defining voltage levels and times on the "user side", e.g. within the examples code. And from a YT video that shown how to drive those screens at 3FPS (didn't try it myself yet), I assume those are the actual LUTs that convert abstractions into voltage control.
Re:Can you get 32 level grayscale out of an E-ink display? by JoeAltmaier on Saturday January 13, 2018 @12:56PM (#16140431)
So many (all?) do this dumb thing on a page update where they write all black and all white several times then write the image. There can't be a good reason for that - they can also put up a dialog popup and erase it without all that drama! Its like they all took the demo driver and shipped it
Re:Can you get 32 level grayscale out of an E-ink display? by userbinator on Saturday January 13, 2018 @01:00PM (#16140442)
The full black/white is to "cleanse" --- since the material itself is stateful, pixels will drift slightly after several writes and cause ghosting/graininess if you don't eventually reset them all to a known state. It doesn't have to happen on every refresh, however.
Re:Can you get 32 level grayscale out of an E-ink display? by noir_lord on Saturday January 13, 2018 @05:54PM (#16141842)
I got a kobo aura one (cracking bit of kit) for christmas, it doesn't have the prounounced flash to white then load at all, it's near instant.

Also 300ppi is the sweet spot on an 8" display it's basically a near perfect paperback analogue and has a blue to orange backlight shift keyed to time of day.

It's basically my idea of a perfect ebook device.

Re:Can you get 32 level grayscale out of an E-ink display? by stevekemp on Saturday January 13, 2018 @11:36PM (#16142821)
I've been experimenting with epaper recently, controlled by an ESP8266 device. The following (short) video shows a full-refresh of an image loaded over HTTP:

https://twitter.com/Stolen_Souls/status/952050581677408256

As you can see it inverts and refreshes. The specs say a full update can take up to 4 seconds, but I've not yet seen one that slow.

Re:Can you get 32 level grayscale out of an E-ink display? by matt_heimer on Saturday January 13, 2018 @09:26PM (#16142490)
On a Kindle Paperwhite it is an option called Page Refresh under your Reading Options. It'll occasionally do a wipe, for example when a page has images but not not often enough to be annoying.
Re:Can you get 32 level grayscale out of an E-ink display? by toast0 on Saturday January 13, 2018 @10:11PM (#16142639)
I don't have the Paperwhite, but this option was present on earlier models too. I found it more annoying to have inconsistent page turn latency than to have consistently slow page turns.
Re:Can you get 32 level grayscale out of an E-ink display? by auxym on Saturday January 13, 2018 @06:34PM (#16141990)
Just want to second this in case someone is considering the One.

I also got it as a gift to myself. If you would have asked me to spec out my ideal ebook reader, I would have ended up describing the One.

Re:Can you get 32 level grayscale out of an E-ink display? by Fnoord on Sunday January 14, 2018 @04:19AM (#16143448)
My partner and I both got a Kobo, we're very happy with it. We use Calibre to manage our collection. Haven't tried DeDRM yet though. I got the Kobo Aura ONE, and she's got the Kobo Aura H2O. I actually prefer the 6.8" yes it is smaller but it lays better in the hand and is easier to take with you (fits better in the pocket). Its also about 50 EUR cheaper.

Some disadvantages: macOS doesn't have always recognise the device, it has 2.4 GHz WiFi only (put if off to save your battery). The Kobo's also have that screen refresh feature btw you can reduce its effectiveness if you're reading a lot.

Immediately after you bought it, check out the coating of the screen very carefully. I send one ONE back because it had a minor damage to the coating which caused bleeding. I found that distracting, YMMV. The 2 devices got it as well, but less severe and it depends on how you hold the device whether you notice it.

Re:Can you get 32 level grayscale out of an E-ink display? by v_lisivka on Sunday January 14, 2018 @12:53PM (#16145297)
I have Onyx Boox Darwin 4 with hi-res display (6" at 1448x1072). I'm happy with it after 3 previous e-books: sharp display, built-in light, touch, stock android with Google Play, 2 cores, 8GB flash. The only misfortune is lack of my native language in UI.

I looking at new Onyx Boox, which was just released: https://www.youtube.com/watch?v=1huyi7mgbzY . IMHO, it is much better than any Kobo on the market right now.

Re:Can you get 32 level grayscale out of an E-ink display? by newen on Saturday January 13, 2018 @11:25PM (#16142803)
Yeah got it for a family member. If it had a micro sd card slot, it really would be the perfect ereader.
Re:Can you get 32 level grayscale out of an E-ink display? by Fnoord on Sunday January 14, 2018 @04:21AM (#16143452)
It has 8 GB how is that not enough in between charges?

Kobo and Amazon don't contain *SD options but other e-readers do [1].

As insinuated, I find it is overrated. You can even run Calibre in Docker [2] to serve it over HTTP(S). And as you know, Kobo have a web browser. So you could put the books you're likely to read on your Kobo (8 GB is a lot) and serve the rest via that way. You could also serve the content over your phone via USB OTG.

If you're off the grid for a long time, I actually recommend something else instead: put your smartphone off, e-reader on, and keep a (at your option relatively, to <3 your battery) charged powerbank with you. Not necessarily for your smartphone, but for your e-reader!

[1] https://tweakers.net/categorie/804/e-readers/producten/ and select all options at the left at "Geheugenkaart Type (E-reader)"

[2] https://hub.docker.com/search/?isAutomated=0&isOfficial=0&pa...

Re:Can you get 32 level grayscale out of an E-ink display? by criddell on Saturday January 13, 2018 @07:56PM (#16142285)
Can it load books bought at Amazon?
Re:Can you get 32 level grayscale out of an E-ink display? by xbmcuser on Saturday January 13, 2018 @10:23PM (#16142669)
You need apprentice Alf and Calibre for that
Re:Can you get 32 level grayscale out of an E-ink display? by criddell on Sunday January 14, 2018 @08:28AM (#16144160)
I know some publisher's don't use DRM (like Tor). I was wondering if maybe Kobo had licensed Amazon's DRM for the newer DRM that doesn't have a crack yet (as far as I know, but I haven't checked in a few months).