A diamagnetic material repels external magnetic fields. Unlike other materials, superconductors have very high diamagnetic constants. [1] This is why one can float a magnet over a superconducting plate (or float a superconductor over a magnet).
If we had room temp superconductors, we could tile a floor with them, mount magnets on carts and float the carts across the floor. Or highway. Or whatever. Lots of uses for levitation that consumes no power.
Superconducting ring storage of electricity.
Probably some break throughs in electrical storage because SQUID devices can now be commodity parts in hard disks.
3.3v (or lower, for modern chips) requires big cables. I doubt that's worth it.
> 1000s of 80% step down converters become 100% efficient.
How does this happen? Are you excluding the efficiency of the central step-down converter?
> Superconducting ring storage of electricity.
Can you actually fit a meaningful amount of energy in there before it saturates?
Even one central step-down converter could be 98% (or whatever) efficient, plus you could actually generate power at 3.3V if you wanted to, making step-down not required.
As far as storage of energy, yeah, you can store a lot of energy in a superconducting ring. It is a viable energy storage method.
THAT ALL SAID, the physics of superconductivity mean that even if you ARE able to get room temperature superconductivity to work, you can get even BETTER critical current (i.e. current per cross section area that can be handled while maintaining a superconducting state) so you'll still probably want to cool the cables in some applications, and for a certain current carrying capacity, you'll probably want to use a higher voltage than just 3.3V, even if you don't have any voltage drop, because that would increase the power that can be transmitted for the same cable investment.
Maybe impressive fireworks/explosion?... from a safe distance. :D
See also: https://en.wikipedia.org/wiki/Superconducting_magnetic_energ...
Assuming the price, mass density, critical magnetic field density, and critical current density are all good, you could launch satellites magnetically against Earth’s magnetic field (but only from the poles and with some cute tricks for efficient horizontal motion).
The main problem today is superconductors' size. You need space for refrigerator circuits, that are not superconductors.
If superconductors operational temperature are high enough, you could just refrigerate the entire room. Making superconductors more dense and powerful. Making fusion possible in extremely small spaces and making it even cheap.
That is you could do fusion expending millions instead of billions.
A group primarily from MIT proposed such a reactor called ARC:
Currently a big limitation on small electric motors is heat, so a fully superconducting motor could handle huge loads.
High-voltage DC actually has less losses.
(Why? Because a high-voltage AC signal is actually low-voltage two times per cycle)
* Long distance transmission is currently high voltage AC to work around losses. The whole distribution network would become efficient but would need reinvestment. This would offset the utility of local instant-response power generation.
* Things that need big magnets would get easier: MRI, particle accelerators, etc. Is this a big deal? Maglev trains would get more attractive.
* What else?