[1]: https://www.aliexpress.com/item/200x200-1-54inch-E-Ink-displ... [2]: https://www.sparkfun.com/products/13907
At work I grit my teeth and suggest we buy the dev kits because it's worth paying $100 for an official board to check something works tomorrow, vs 3 weeks for a PCB and 2 days of tinkering. But at home, as a hobbyist, I mutter under my breath and fire up Eagle.
2.9inch E-Ink display module: $18.99 [1]
Wemos D1 Mini 8266 module: $2.55 [2]
600mAh Lipo battery: $1.87 [3]
USB-to-serial converter: $1.08 [4]
3D printed case: $5 ?
On top of that, this is a totally custom designed and assembled PCB which would cost any indie hardware hacker a lot of time and significantly more than $50 to produce.
Of course, if you were to get this mass manufacturered, you could probably bring the cost down to about $25 but I love Tindie because it gives makers a platform to share their products and consumers a place to buy very custom products that they do not have the time or money to make themselves.
[1] https://www.waveshare.com/2.9inch-e-paper-module.htm
[2] https://www.aliexpress.com/item/1pcs-Smart-Electronics-D1-mi...
[3] https://www.aliexpress.com/item/High-Quality-3-7V-600mAh-25C...
[4] https://www.aliexpress.com/item/1PCS-CP2102-USB-2-0-to-TTL-U...
For shipping I use a fulfillment service in China. If you order on Tindie I import the order in my own shop system. From there the order is exported together with orders that came in directly on my shop to the fulfillment center by API. I have to choose the best of sometimes 20 different shipping services and the costs for shipping are different for every case, depending where you live and if value added tax is pre-charged (e.g. EU countries). Then a guy in a warehouse in Dongguan walks to a shelf and picks one of my boxes, labels it and sends it off to you. I had to learn the hard way that sending without tracking is cheaper but quite risky. So I also put insurance on the orders. The guy in the fulfillment center also needs to get paid.
And I spent a lot of time developing a graphics library (MiniGrafx) which gives you a lot more freedom than other libraries available for these displays. And now I'm working on a web server application which will make it super easy to configure the ESPaper remotely. Choose a application (e.g. weather, Calendar, Meeting Room, Sticky Note), configure it and when the device wakes up next time it will download the image information from the server. So all that costs a lot of time and most of the code is open source or will be at one point.
I totally understand if you want to build this by yourself, since I am having a lot of fun doing it. But not everyone has that level of patience or expertise and those who don't I'm offering a short cut.
https://theworklife.com/graham-miln/2013/12/17/e-ink-price-t...
Hopefully someone gets the idea and mass produces it.
https://m.alibaba.com/product/60250435288/Supermarket-esl-di...
Sadly, there were only a handful available after the event (for about €30). I'm hoping someone continues with the design, because I can think of quite a few applications, but I'm worried about breaking it.
https://sean-farrell-1uu4.squarespace.com/
They got it to working prototype stage, I think, but didn't end up taking it commercial. It's too bad – a cool idea. I'd love to have one.
Heck, I'd buy it for my desk even without any of the GUI tools if it allowed me to display from a list of quotes.
They’re dirt cheap.
As in which controller to buy, how to interface the controller to the display, and how to set myself up to program such a controller... etc. I can try if there are enough resources, but honestly I'm easily intimidated if someone says "Just get a ESPXYX900 controller and hook it up to ABC IDE and flash this ROM and there you go."
I can program in Python and I have heard of MicroPython. If only I can figure out how to get to a point where I can get my python program to execute on one of these tiny wonders.
I’ve never used MicroPython, but the C APIs I’ve seen for LCDs for micro controllers are usually pretty straightforward. Depending on the level of abstraction, they might offer a basic “put this B&W/R&G&B pixel at location x,y” or a higher-level “print text xyz” type of interface, both of which are easily exposed to python’s ffi and consuming it from there should be no problem.
But the trick is waiting for someone to get that driver made.
I’ve been meaning to play around with mine, if there’s sufficient interest I could see how realistic writing up some Arduino-compatible code to interface with it and some instructions would be.
I browsed around Waveshare.com and they seem to have posted "demo code" for the displays you linked before. I will try to muck around with them later, but it'd most likely be beyond my understanding of display drivers.
It'd be incredibly cool to have a cookbook for "Arduino + Tri-color E-Ink display for displaying text" - for beginners. If you think you could muster time & motivation to develop such instructions, I can help with (1) personal donation of $20, and (2) Sponsoring a domain and a basic web page describing the project for others to follow with donation options directed to you.
https://github.com/peterhinch/micropython-epaper
Which supports this 2.7" display: http://www.embeddedartists.com/products/displays/lcd_27_epap...
Which is a bit cheaper than the OP.
[1] https://www.tindie.com/products/squix78/esp8266-wifi-color-d...
If you don't want to replenish batteries "every few weeks", how does a cheap phone fit your need?
3" display is enough for my need.
Small LiPo battery works for my need.
I can spend a few hours learning to program this thing with Arduino IDE or whichever tool is needed with a little bit of Internet handholding.
But, >$50(incl shipping) kits don't give me the value I look for. Why are they so expensive?
I'd happily buy a pre-made setup of (controller+LiPo battery+e-paper display) easy to program device if the price is < $30.