News for hackers. Stuff that matters.
Re:ESP8266 ePaper WiFi Display Kit Runs for Months on a Charge by slig on Wednesday December 27, 2017 @08:28AM (#16014613)
Would a 1.5" display work? You can buy these [1] from AliExpress for $15 a piece. And for $19 you can get this board from Sparkfun with a built in LiPo charger [2]. Or course you can go way cheaper on the board + charger, but this one is pretty easy to use if you don't have much experience with electronics.

[1]: https://www.aliexpress.com/item/200x200-1-54inch-E-Ink-displ... [2]: https://www.sparkfun.com/products/13907

Re:ESP8266 ePaper WiFi Display Kit Runs for Months on a Charge by spuz on Wednesday December 27, 2017 @11:10AM (#16015546)
Well, 15 + 19 is already $34 and that doesn't include a case or battery. Of course there are much cheaper ESP8266 boards you could use rather than the Sparkfun ESP32 Thing but then you have to go through the trouble of programming it, building an enclosure etc all of which is probably going to cost you a lot more than $50.
Re:ESP8266 ePaper WiFi Display Kit Runs for Months on a Charge by ComputerGuru on Wednesday December 27, 2017 @11:21AM (#16015637)
What you call “trouble” others would term “fun” or “challenge” or “the whole point of doing it yourself”.
Re:ESP8266 ePaper WiFi Display Kit Runs for Months on a Charge by spuz on Wednesday December 27, 2017 @03:00PM (#16017572)
I agree, doing it yourself is fun, but if cost is your main concern, then DIY is absolutely not the way to go. For reference, I recently finished relatively simple ESP32 sensor project and while the components by themselves probably cost about £20, I ended up spending about £150 in parts and tools over the whole process. The extra cost was down to breaking parts and ordering replacements, needing basic components such as resistors and breadboards which many will already have in their toolbox and needing to make about 10 different orders + associated shipping costs as I went through each revision of the design.