They could do appliances (stuff like SpeedQueen washers), hand and garden tools, kitchen stuff like pots and pans and knives... just anything that's solid and lasts and doesn't require ridiculous maintenance to make it so.
Sometimes now I'd be willing pay more but either I can't even find the stuff that isn't cheap junk, or I just can't tell what's going to break and what isn't.
I think having high quality appliances is partially why Sears tanked... First they didn't sell as many (due to having to compete on price with lower quality / cheaper products), then when they found a way to compete (having Samsung make Kenmore appliances, for example), they lost the quality and the last reason anyone would opt to go there over Costco or Amazon or Home Depot.
I bought a matching Washer / Dryer set from Costco. Then the next year I bought a Fridge and Dishwasher from LG there too. For the first three years or so it was fine, but about 5 years in I think they all have issues. My house is about 20 years old, and the Dishwasher I replaced was the original... so it lasted 15 years. I can say that the new (and fairly top of the line) Dishwasher has more issues at 5 than the old builder-grade one had at 15. I really regret not getting a Bosch...
But even up into the 80s and 90s Sears / Maytag were known for selling top quality goods that didn't break. Here's a cute commercial.
* 1988 Maytag Repairman Commercial - YouTube || https://www.youtube.com/watch?v=8ZHsxPEAUOI
Sears is a lost cause. The only thing keeping them afloat is the value tied up in their real estate holdings.
I hadn't even thought about this.
Funny... my parents have a very low energy bill compared to mine... even using these "old" appliances. I think it has more to do with the fact that they have a smaller house, and still prefer to wash dishes by hand, and don't leave any computers on or have an air conditioning system. Makes me wonder how much "efficiency" at the appliance-level matters. No doubt the EPA isn't a bad investment, but I don't think they are regulating the things that really matter. Homes built in the 1950s were tiny... like 1,200 - 1,500 sqft. Average house today is 2,700 sqft. And there are a lot more bells and whistles going into it.
It's a bit ironic though, because there is a lot more stuff that can and will go wrong in a £600 heat-pump condenser dryer vs a £150 vented dryer. If they are both equally designed to be 'disposable' which is really better for the environment?
Eventually the dryer stopped working and I started looking for replacements. I stopped at a local used appliance place and described the problem, the guy who worked there suggested that since it was one of the old sturdy types, it might be a simple repair. I had him come out and he took a looks. It was a bad fuse. $40 later, I was back in business.
I dread the day when I can no longer have them repaired and have to replace them with disposable appliances.
I know I can lease washers, but the price makes is such that I might as well buy and replace every so often. 2 years amount to buying the machine, and most machines last longer than that. But pay to lease a commercial grade washer would be great.
Mattresses are similar, but fortunately, there is https://www.themattressunderground.com/ , which is a high quality site. I bought a Tuft and Needle mattress based on my learning there and it has been spectacular.
Similar needs to happen for appliances.
Do you know about Consumer Reports?[1]
It's a non-profit organization which puts out a magazine (and website) which does unbiased product testing, has zero advertising, pays for all the products they test, never takes sample products, buys all their products anonymously (so they can't be given better samples for testing purposes), and has extensive laboratories, procedures, scientist/technicians for testing (a private track for testing cars, for example).
I never heard of anyone saying that Consumer Reports was fraudulent or paid-reviewed. Appliances are things that they definitely review all the time.
The downsides of Consumer Reports are as follows:
- it's U.S. based, so it's focused on products available in the U.S.
- for appliances, say a washing machine, they are going to pick only 10-20 models to review, even though there may be hundreds of models on the market
- there are a million things they'll never review because they are not an ordinary, common, consumer purchases; you'll never see reviews of oscilloscopes :-)
Another downside, as the article pointed out, is the intentional smokescreen of multiple product names and slightly differing versions that make comparison shopping and meaningful reviews virtually impossible, and why I don't get as much value from my Consumer Reports subscription as I used to.
This is particularly prevalent in the mattress industry.
You stated the entire cause->effect very succinctly yourself: "If a brand gets a good reputation, some big conglomerate buys it and starts using it to make trash, and it takes time for consumers to learn it through the grapevine"
It is an extremely straightforward way for a company to make quick money.
BS. It's my #1 criteria when buying something.
Businesses are also generally more conservative in future projections and less price sensitive than consumers.
I personally started doing this a few years ago. I even have a throwaway LLC that sounds nebulously like a contractor so I can sign up for "industry only" marketplaces. Since I can usually get wholesale prices doing this, I pay only maybe 30% more than for crap consumer level throwaway stuff.
The major downside is the time it takes, but the upside is that none of my stuff ever breaks.
Which means that if you need some replacement part in the future it's going to cost even more.
I don't even mind that modern appliances break so often; it's the fiddly plastic bits and lack of parts that are the problem. Give us something made of metal with some screws and the damn thing can probably be fixed.
(re: the article topic, this is another thing that's kept me away from automobiles for the past twenty years)
It's a failure of feedback that makes this happen.
If people can't get reliable information about quality, quality will not determine what they buy. Price will, and price is readily available. To get price down, you need costs down. To do that, you replace the parts with crappy parts.
If feedback worked, people would know they were paying less for a less good appliance that will have more downtime, and they would act accordingly.
Part of it is statistical noise: you only get to use so many washing machines in your life, and you may or may not have big problems with them. Your only direct evidence on quality then depends on this roll of the dice.
Part of it is lack of competition: only 4 competitors. You only need to be in the ballpark of "OK" to sell. You're not scratching around for every customer, there's definitely going to be some. So why spend a lot of money making your machine more reliable?
Part of it is cost of information: how much time are you going to spend finding this information? You'll need to learn a bunch of technical terms. And how do you find trustworthy reviews? Most likely reviews are another source of noise, for the same reason as mentioned. So information is expensive to get and anyway if you're right about the manufacturers being the same it's also worthless!