News for hackers. Stuff that matters.
Re:OpenBSD 6.0 released by jasonkostempski on Thursday September 01, 2016 @07:16AM (#12404359)
It does? I was under the impression the only reason anyone still did that was to give something physical to donators.
Re:OpenBSD 6.0 released by throwaway7767 on Thursday September 01, 2016 @08:25AM (#12404696)
CDs are read-only, whereas a USB stick has (generally insecure) firmware that can be modified. So in a setting where the user is concerned about persistent USB malware, it can make sense to use them.

It's a niche concern of course, but I suspect it's a little bit more common in the OpenBSD community than in many others. Of course it shouldn't be too hard for those users to build their own install boot CDs with the tarballs for installation, just skip the big package sets and install them later if the whole won't fit on the disc.

Re:OpenBSD 6.0 released by soccerdave on Thursday September 01, 2016 @09:15AM (#12404963)
What happens if your cd that comes in the mail is swapped out for a different cd by a malicious actor?
Re:OpenBSD 6.0 released by kabdib on Thursday September 01, 2016 @09:36AM (#12405103)
You check hashes (from the web site) after you copy the files to media you trust, and then any tampering is really interesting . . .
Re:OpenBSD 6.0 released by aruggirello on Thursday September 01, 2016 @09:48AM (#12405190)
You can find well-known hashes to check your install media with online (assuming you can trust the media because it comes wrapped up in a nice package is a bit naive...). What you cannot check however, is a USB key firmware (ring-0?) malware, that lives completely outside of disk space, and thus is beyond reach, but might have limited (or even complete) access to the system it is plugged to. CDs and DVDs (don't know, but perhaps SD/compact flash/etc. cards too?) are thus the last mainstream media that come with 'no firmware attached'.
Re:OpenBSD 6.0 released by joyfulgerard on Thursday September 01, 2016 @09:10PM (#12410074)
> What happens when a malicious actor leaves physical evidence all over?

They get caught.

Re:OpenBSD 6.0 released by ue_ on Thursday September 01, 2016 @07:26AM (#12404404)
Perhaps I'm the only person using computers in 2016 who only installs OpenBSD via CD :-)
Re:OpenBSD 6.0 released by agumonkey on Thursday September 01, 2016 @08:21AM (#12404671)
I only do to enjoy the pleasure of old ways. Interacting with CDs and CD drives reminds me of when it was cutting edge. Tray mechanics, the speed intake of spinning motors. Even the latency and seek sounds. And somehow, the (almost since it's on DVD RW) immutability. In some ways, the sheer speed of SSD is ... boring when you're not in a hurry.

ps: a bit like vynil lovers who take their player out for similar reasons.

Re:OpenBSD 6.0 released by jasonkostempski on Thursday September 01, 2016 @10:01AM (#12405287)
I do that too. I also like to imagine a post-apocalyptic, no-internet time where I have a generator, PC, BSD disk and the knowledge to use them to rule the new world while everyone else is stuck on the "Activation Required" screen.
Re:OpenBSD 6.0 released by PhantomGremlin on Thursday September 01, 2016 @09:07PM (#12410058)
Fortunately OS X isn't as bad as Windows. I haven't tried the most recent version, but for previous versions I have successfully installed OS X from a USB stick, without needing any internet access at all.

However, the OS X binaries are signed. So, when the key expires, people are SOL. I had this problem, and easily re-downloaded my various older OS X versions. But in the general case it's quite disturbing: http://www.macrumors.com/2016/03/03/older-os-x-installers-br...

Re:OpenBSD 6.0 released by aruggirello on Thursday September 01, 2016 @10:06AM (#12405311)
Reminds me of my old faithful Amiga, and its 3,5" floppy drive...it made a distinct, almost musical sound. You just turned the machine on and that famous splash screen would appear, then the empty drive would start ticking regularly, waiting for an 880Kb disk. As soon as a disk was inserted, you could hear its typical seek noise while the system booted, track after track...
Re:OpenBSD 6.0 released by pjmlp on Thursday September 01, 2016 @10:16AM (#12405375)
And the famous click of death.
Re:OpenBSD 6.0 released by keithpeter on Thursday September 01, 2016 @03:43PM (#12408264)
I can recommend an offline install of Debian using the DVD1, DVD2 and DVD3 binary iso images. No need for an Internet connection.

Depending on the software you wish to install, you will be swapping between the DVDs a few times (e.g. texlive/gnuplot/r-base).

So far as I am aware, Debian is the only distribution that provides a fair chunk of the packages available in the (main) repository for effectively offline installation.

Re:OpenBSD 6.0 released by cyphar on Thursday September 01, 2016 @09:45PM (#12410238)
SLE (and RHEL) do too, and I think that openSUSE Leap does as well (but I don't think that it's visible from the main download page).
Re:OpenBSD 6.0 released by keithpeter on Friday September 02, 2016 @02:53AM (#12411363)
Thanks, I'll check the openSUSE Leap arrangements.
Re:OpenBSD 6.0 released by cyphar on Friday September 02, 2016 @03:49AM (#12411575)
Damn, I just double-checked and it looks that I was mistaken[1]. I'll send an email to [email protected] to see if there's a reason we can't produce ISOs like that. Since both SLE and openSUSE use OBS (the Open Build Service), it should be possible to publish those images without much issue.

[1]: http://download.opensuse.org/distribution/leap/42.1/iso/

Re:OpenBSD 6.0 released by cyphar on Friday September 02, 2016 @07:13AM (#12412208)
Re:OpenBSD 6.0 released by keithpeter on Friday September 02, 2016 @03:05PM (#12415413)
So at present, offline installation with a reasonable package selection is Debian off the shelf and Slackware with a carefully curated cache of slackbuild produced binaries.

I suppose one could cache the OpenBSD package binaries and point pkg_add to the relevant storage media to make a third option.

Re:OpenBSD 6.0 released by cyphar on Saturday September 03, 2016 @12:18AM (#12417698)
You could also cache the openSUSE packages as well (zypper allows you to add any directory as a repo). If you _really_ wanted to do it, you could do a recursive copy of http://download.opensuse.org/distribution/leap/42.1/repo/oss... with wget and then point zypper at that directory.
Re:OpenBSD 6.0 released by Touche on Thursday September 01, 2016 @07:34AM (#12404429)
I haven't even owned a computer with a CD/DVD drive in over 10 years.

One thing that drives me mad is that computer manufacturers still distribute recovery images as DVDs, even though the computers the discs are for don't have drives.

Re:OpenBSD 6.0 released by SixSigma on Thursday September 01, 2016 @07:42AM (#12404463)
USB CD/DVD drives exist
Re:OpenBSD 6.0 released by Touche on Thursday September 01, 2016 @07:55AM (#12404526)
Yeah I know, it's just annoying to own something you'll need once every 2 years or so.
Re:OpenBSD 6.0 released by dnzm on Thursday September 01, 2016 @08:17AM (#12404654)
In fact, I prefer to own something that I use once or twice a year (and between different computers at that), and then store in a box somewhere, rather than having a piece of computer suck in dust and whatnot all the time.

Not exactly a counterpoint to what you were saying, but somehow related.

Re:OpenBSD 6.0 released by SixSigma on Thursday September 01, 2016 @10:04AM (#12405303)
Such as re-installation DVDs
Re:OpenBSD 6.0 released by jasonkostempski on Thursday September 01, 2016 @07:30AM (#12404415)
I still install all my OSes via CD/DVD but I burn them myself from an ISO.
Re:OpenBSD 6.0 released by jimktrains2 on Thursday September 01, 2016 @10:25AM (#12405437)
The last couple installs of any OS I've done have been a few off of USB and the rest off PXE.
Re:OpenBSD 6.0 released by anthk on Thursday September 01, 2016 @08:35AM (#12404755)
I install it from the ramdisk, much better.
Re:OpenBSD 6.0 released by GTP on Thursday September 01, 2016 @09:56AM (#12405259)
How? How can you make a ramdisk resistant to a reboot?
Re:OpenBSD 6.0 released by clarry on Friday September 02, 2016 @06:14AM (#12412012)
You don't need to. It's created a-fresh for you when you boot bsd.rd. After you're done installing, you don't need the ramdisk as you'll boot your newly installed bsd kernel.
Re:OpenBSD 6.0 released by GTP on Friday September 02, 2016 @07:24AM (#12412247)
Are you referring to the upgrade method described here [1]?

[1] https://www.openbsd.org/faq/faq4.html#bsd.rd

Re:OpenBSD 6.0 released by Gracana on Thursday September 01, 2016 @08:42AM (#12404789)
One nice thing about the physical CDs is that they're trustworthy source for the release's signify pubkeys (which you can compare with the ones on the website.)
Re:OpenBSD 6.0 released by angry-hacker on Thursday September 01, 2016 @01:59PM (#12407482)
What if someone tampers the CD before it is delivered to you?
Re:OpenBSD 6.0 released by dmm on Thursday September 01, 2016 @08:20AM (#12404667)
Don't forget the awesome stickers!
Re:OpenBSD 6.0 released by groovy2shoes on Thursday September 01, 2016 @09:42AM (#12405162)
Yeah, and even the packaging. The latest release (5.9) was the first "official" OpenBSD CD set I ever bought, and I was astounded by the quality of the set, from the packaging and inserts to the discs themselves. I don't know why, but I didn't expect it to be so... professional. I pre-ordered this release, too. I like being able to help out the OpenBSD project financially and get something nice out of it. Oh, well. RIP, OpenBSD CDs.
Re:OpenBSD 6.0 released by justin66 on Thursday September 01, 2016 @08:41AM (#12404786)
The flexibility in the release schedule strikes me as very useful. The CD sales business is admittedly less interesting.