http://www.rangemaster.co.uk/products/range-cookers/nexus/ne...
That in fact sounds like a really bad idea, but in the European countries where I have lived, the typical "good ol' knob" stove had the knobs placed vertically right above the oven, not on the top of the stove. Like this:
http://estaticos1.milanuncios.com/fg/1979/73/hornos-en-playa...
http://www.kalea.es/imagenes/fotosAnuncios/15127_12091009085...
So the problem you mention doesn't exist because the knobs aren't something you have to clean after cooking, you're OK cleaning them once per week.
I personally prefer the knobs because stoves with touch buttons tend to beep and turn themselves off when water or oil gets on the controls, which is a quite common circumstance when they're 2 or 3 cm away from a boiling pot. I don't know who had the great idea of designing controls that don't work when wet and putting them in a place that will very often get wet - OK, if you are careful you can avoid it, but I shouldn't need to be careful with that when cooking. Sometimes (e.g. for cooking a big crab) it's very convenient to fill a pot almost to the brim with water for boiling and just dry the water that comes out afterwards, with the touch buttons you just can't do that.
The real problem with these new UIs is lack of choice. I can live with the touch buttons, but my grandma can't, she's 86 and she just doesn't learn new interfaces at that age. Her stove recently broke and we had a really hard time to find another vitroceramic one with knobs, because apparently they don't make them anymore. We finally found an old model somewhere and probably paid it quite overpriced.
But yes, overall I do agree with you. My one major annoyance is that changing temperatures is slower than with a rotating knob.
I ended up going to a showroom and twisting all the knobs of all the stoves to find out which ones didn't have that limitation. I must have looked like a crazy person, but I got one I liked in the end.
The stove I ended up buying had one variable-size burner, and that knob had a bounce-back switch at the end, so you have to turn that knob the wrong way around to max it, but I could live with that. Why a regular burner would have the limit beats me. The only thing I could think of would be some sort of extremely crude and ineffective child-protection, but all stoves have a child-lock anyway, so what's the use?
It's absolutely amazing what people can manage to screw up.
Edit: To clarify - Aglio olio is what they cook in prison in Good Fellas. It's both the most simplest pasta dish and the easiest to screw up - overcook the garlic a bit and you get garlic chips instead of melting their flavour into the sauce.
Power knob (the kind that clicks to exact positions), timer knob. Only interface. Set power (or don't if it's already where you want it), turn timer to where you want it. Done. Pull door to open, not even a button for that. 100x better than the interface on modern microwaves.
I will say this much: that seems totally intuitive to me. You tap the button for the burner you want, then tap the +/- buttons to get your temperature, right? I like having each burner's setting readout all together in one place, as well.
Everything else about it is terrible. Oven controls need to be tactile, they need to be immediate, and they need to not be three inches from a hot pan. That'll cause enough burns just from fumble-fingering in normal use--now imagine that your pan has caught fire and you're trying to select the left front burner and press - 8 times while your hand is showered with flaming grease. Who could possibly have thought this was a good idea?