That's a text file, which doesn't use the full range of a byte (0-255), so each character takes less than a byte.
Try compressing the output of /dev/urandom on your nearest convenient UNIX-like system. If you figure out a way to reliably and significantly compress that, please report back.
Also, the odds of getting finding even a single encrypted file of that length which can be compressed are lower than the odds of winning the lottery three times in a row. Trust me, you didn't just happen to stumble across a working example. You screwed up the test.
Then compressed it with winrar http://pasted.co/compressed.rar ( 7,743 bytes )
Roughly 20% compression isnt meaningless- so I fail to see why you are just giving a flat 'no' when its obvious what you are saying is untrue.
$ dd if=/dev/urandom of=test bs=1k count=10
$ cat test | gzip -9 > test.gz
$ cat test | bzip2 -9 > test.bz2
$ ls -al test*
-rw-r--r-- 1 r1ch r1ch 10240 Jun 28 16:30 test
-rw-r--r-- 1 r1ch r1ch 10739 Jun 28 16:31 test.bz2
-rw-r--r-- 1 r1ch r1ch 10263 Jun 28 16:31 test.gz
Random data is not compressible.
$ dd if=/dev/zero of=test bs=1k count=10
$ openssl enc -in test -aes-256-ctr -out test.encrypted
$ cat test.encrypted | gzip -9 > test.encrypted.gz
$ cat test.encrypted | bzip2 -9 > test.encrypted.bz2
$ ls -al test*
-rw-r--r-- 1 r1ch r1ch 10240 Jun 28 16:32 test
-rw-r--r-- 1 r1ch r1ch 10256 Jun 28 16:33 test.encrypted
-rw-r--r-- 1 r1ch r1ch 10737 Jun 28 16:34 test.encrypted.bz2
-rw-r--r-- 1 r1ch r1ch 10279 Jun 28 16:33 test.encrypted.gz
Encrypted zeroes are not compressible.
http://pasted.co/wasteoftime.txt 4,732 bytes
http://pasted.co/wasteoftime.rar 3,753 bytes
Also, if there is issues with using the 'wrong' encryption, I feel thats kind of a straw man argument. Please feel free to upload a file over 5MB which cant be reduced in size through any of the various compression tools.
Also, keep in mind that I never said it would be a huge benefit at all- I only said that SOME compression was possible SOME of the time.
Do you understand the difference between base64 and binary data? Base64 only uses six bits per byte. It's designed to allow data to transit cleanly through places which only allow text, such as JSON. Binary data is eight bits per byte. Binary data is what encryption and compression algorithms output. Naturally, if you take data which only uses six bits per byte, and run it through a compression algorithm which is able to use eight bits per byte, you can achieve good compression. But this is illusory, because you expanded the original by 33% when you applied base64 in the first place! All your attempts at compression can be beaten by simply decoding the base64 into the original binary data.
It doesn't matter what magnitude of compression you specified. Random data cannot be compressed at all on average. This is a simple mathematical certainty with a straightforward proof. Encrypted data looks and acts like random data. If you find a way to reliably compress the output of a modern, secure encryption algorithm (not the base64 encoding, but the original binary) then you'll have found a massive security hole in it which will make you famous.
This is a common misconception. The pigeonhole principle here tells us that any scheme that ever achieves some compression also achieves some expansion. The only reason compression algorithms work at all is because they are more likely to compress than they are to expand, because we know something about the probability distribution of the plaintexts.
The pigeonhole argument treats compression as a black box with input and output, and makes no assumption about how the compression works.
Your idea—to only compress some inputs and not others—doesn't change the fact that your algorithm can be treated as if it is a black box with inputs and outputs. So the pigeonhole principle still applies. Many people before you have made this argument before, so we are very familiar with it, and very familiar with the reason why it is wrong.
FURTHERMORE, compression, by its very nature, works very poorly on data which is apparently uniformly distributed, as encrypted data is.
This is why you are wrong.
you are trying to bring empirical evidence to an information theoretic fight :(
So yes, it is random, and 100 X's could appear in a row. But if your model can effectively compress that, then the model has to be wasting space for all the other sequences.
Let's just imagine that you are doing some like basic run length coding (gif! Or jif if you're wrong :) )
So 100 x's turns into (100, x). So you've compressed that part of the stream. Unfortunately everything else is likely (1,a), etc so every other symbol/byte increases in size. If we look at the stream probabilities we get something like P(nX)=(P(X)^n) -- very rough I haven't been at uni for a long time :). You can do a bunch of reasonably simple math do verify it but you eventually end up with something that your average symbol size is sum{x in X}-log(P(x))/|X|. Where X is your set of possible symbols (n,x:X).
For a given stream that is not encrypted you may save some space representing the input bytes, but each symbol (n,X) has at /least/ 1 extra bit of information. Overall you can save space.
But let's look at the encrypted data. Each input symbol is independent so your probability of any sequence in the input is equal. You will typically have a run length of 1 (P=0.5), 2 (P=0.5), ...
So 50% of your output symbols will have at least one extra bit of information /added/. This means your output by necessity is bigger than the input.
I used RLE as an example here, but it's true for all compression schemes. This is a necessary property for compression to work: for any data that compresses by n% under a given model there must be some input that increases in size by n% (or some such, again, long time since uni). I believe Wikipedia has an article on the pigeon hole problem or some such that probably explains this better than I can.
Any decent encryption algorithm has output indistinguishable from random noise; the odds of 100 Xes in a row in random data is 1:2^800; there are only 10^80 particles in the universe (2^266), which is 534 base-2 orders of magnitude smaller than 2^800. Yes, every particle in the universe could be a universe of fundamental particles and you'd still never see 100 Xs in a row in a decently-encrypted message.
If you manage to get that under 5MB by applying any tool which allows recovering the original data, I will be most interested to know how you did it.
./compress.sh https://mikeash.com/tmp/randomfile.bin > randomfile.compressedzomg
:D
/me hides
Everyone here is telling you that you are wrong, and have even clearly demonstrated this through both mathematical reasoning and empirical tests. Quit digging :-)
On that note, sometimes we all get too attached to our own hard-won mistakes. We all need to remember that sometimes we should set aside pride and just say, "Whoops, my reasoning was unclear or I was misinformed, thanks for correcting my misstatent or misunderstanding."
AES-ECB mode will actually compress fairly well for some inputs (the canonical example being a bitmap image). The reason the compression can work? Because the crypto is broken. In the image case you can actually just visually (no maths or anything) see a large amount of the details of the source image.
https://upload.wikimedia.org/wikipedia/commons/f/f0/Tux_ecb....
An additional point you need to consider: You can select different models and compression programs (and some programs do do this), but you have to record which one you use in your output. This again increases the size of the output - this means that even a no-op compression algorithm (say cat or cp :D ) results in output that is bigger (you need a initial byte to say you haven't tried to compress).
I think the better approach to what you're claiming is for you to provide an example that is compressed. Just provide the input, the key, the encryption algorithm (AES-GCM for preference, but seriously AES-CBC would work to), and the compression algorithm.
(in-package :cl-user)
(use-package :ironclad)
(let ((data (make-array (* 5 1024 1024)
:element-type '(unsigned-byte 8)
:initial-element (char-code #\X))))
(encrypt-in-place
(make-cipher
:aes
:key (sb-ext:string-to-octets "YELLOW SUBMARINE")
:mode :ctr
:initialization-vector (make-array 16 :element-type '(unsigned-byte 8)))
data)
(with-open-file (tmp "/tmp/data" :direction :output
:element-type '(unsigned-byte 8))
(write-sequence data tmp)))
That's a file of 5,242,880 'X' characters, encrypted with the key 'YELLOW SUBMARINE' and an all-zero initialization vector. You will not be able to compress it.may be smaller, not all outputs will be smaller, this is true of all lossless compression algorithms:
The real question is, can you reliably compress encrypted messages in general? And, given that the encryption is not broken, the answer is no.
In theory, some random outputs will be compressible by common tools (for example, a file that's all zeroes). However, the probability of encountering a random file that compresses more than the overhead from any common compression tool is vanishingly small.
No they're not. They're saying that as a class, you cannot compress the data. That is a statement about what happens in aggregate. And the aggregate result of trying to compress securely-encrypted data is that you don't save bytes. Even just having the option of compression does not save bytes, because you have to store the choice.
Not to nitpick, but this is incorrect. A encrypted file can very well have something like 100 X's in a row which the compression system could turn from XXXXXXXXXXXXXXXX.... into (100 x's go here) - Lousy example I know but it gets the point across.
Its also easy enough to test- Just encrypt a file then compress it. Sometimes it will be smaller. (Your reply indicated that in 100% of attempts compression is impossible)