Game consoles historically have done all of these: You have to spend tens of thousands on a developer kit, they often prefer to see companies with a history, and they review your game before they allow you to sell it. I think all of these do help increase the quality.
The negative of course is that you end up with a walled garden.
Instead of getting cool, inexpensive eGPU or other external PCIe tech, we have to pay upwards of $200 just to connect our existing PCIe cards. And take note of the cost difference between external hard drives that incorporate Thunderbolt rather than USB3.0: they're way more expensive.
What's more convenient for consumers? USB3.0, not Thunderbolt. Even though Thunderbolt is way more interesting and has way more promise (it's the entire PCIe bus, exposed!), it was nearly stillborn because of its inane licensing.
If we end up replacing the current market where chargers run £1-£30 with one where they're £8-£35, but can be confident of reasonable levels of basic electrical functionality and safety, I'd be happy enough.
You don't even need a standards consortium to do it.
This is a much bigger deal with USB 3.1, as according to http://www.extremetech.com/computing/197145-reversible-usb-t..., we're looking at up to 100 watts of power being sent down the wire - I very, very, very much want to be certain that the gear I'm connecting to the charger doesn't get torched by the wrong power levels.
I think there is a reasonable middle ground between "Small Elite Group" and "Everyone" - I.E. given that the global market for USB chargers will be on the order of approx 1 Billion units/year (certainly more than 100 million, and probably less than 10 Billion) - and given that a 4-port charger goes for about $20 today, presuming the cost of those chargers goes to, say, $27, then that's $27 Billion revenue/year. (Some chargers will be single/dual port, but other chargers will be more expensive/featured - we're schwagging here). Probably sufficient to support on the order of 2-3 thousand companies that have been certified, presuming that each company needs to drive around 10mm revenue/year after certified their product(s).
I'm satisfied with being limited to 2000 or so USB charger vendors of hopefully higher quality, than 10,000+ of who-knows quality.
This is a very real problem: http://arstechnica.com/gadgets/2016/02/google-engineer-finds...
This wasn't that big of a deal in the Pre 3.1 era, because the power levels typically being supplied were less, and there was a broad understanding of the power levels that were going to be supplied.
You write, "Those people are going to look for cheap USB chargers, even if they are sub standard quality - and the market will fill that niche one way or the other." - and I totally agree with you, which is the entire reason why these certification programs are required - to ensure that only systems certified to be in-spec will be recognized.
My 10 Watt USB charger, that I've carried with me all over the world for 2+ years, powers up my iPhone, my iPad, and my battery-backups. I use it every single day, usually multiple times/day. I realize that an extra $7 can be a lot of money for some people, but, spread over 2 years, for something so important, it seems to be a reasonable investment.
It becomes an even bigger deal once you can also charge your laptop off the same charger.
The customer quite often just wants the cheapest price, the charger manufacturer doesn't care about anything other than selling lots of chargers, the two groups that do care, the Standard Body, and the manufacturers of the equipment being charged do care about energy quality and equipment protection. In the case of the manufacturer of the equipment being charged - you are right, they can take steps to protect their equipment, but it costs a bit of money to engineer a subsystem to detect a 100 watt charge and protect the upstream gear - likely cheaper just to query and confirm that the downstream device is certified and then trust it (somewhat). You still need the protection (defense in depth) - but starting off with certified chargers certainly helps. The standards body, really has every incentive to ensure that the only certified vendors can manufacture chargers that will be (broadly) accepted.
As you said, the market will fill the niche either way.
This extra effort is not going to effect people who can only buy the cheapest chargers. They will buy the knock offs as they have always done.
The rest of us can now be certain that our chargers are within spec.
When the charger that comes with the product breaks they'll need another one. If they can buy a cheap one that "just works" then yes that will make a difference. Even if the cheap one isn't certified. Not all of them are the horrific death traps that have been highlighted.
That or the licensing will make it prohibitively expensive no matter what. Pick your poison, I suppose.
Seriously, the tech situation in Poland is really sad. We don't need USB3.1 making it worse. (I'm a citizen)
This is literally the same as saying "I won't be able to afford higher cigarette prices" "well don't get an expensive phone then".
https://news.ycombinator.com/item?id=11325150
So it makes sense to regulate chargers somehow. Not sure if this is the best solution, but if we can prevent the small elite group from charging insane prices, that could work.
https://news.ycombinator.com/item?id=11325150
So it makes sense to regulate chargers somehow. Not sure if this is the best solution, but if we can prevent the small elite group from charging insane prices, that could work.
It doesn't solve the problem, it moves the stupid somewhere else.