Re:Printing a wall-sized world map and what I've learned fro...
by logfromblammo on Thursday April 30, 2015 @11:37AM
(#9465722)
If you have to do it yourself anyway, why not make your own projection? I'd do a Dymaxion-style projection onto a truncated icosahedron (Goldberg polyhedron G(1,1), a.k.a. the soccer ball shape), with the poles centered in two of the pentagons, and as many edges as possible over bodies of water. Then I'd print each tile image and plaster it to its own mounting board, trimming the backs of the board edges to 69 degrees on all the hexagons and 73.5 degrees on all the pentagons. At that point, I'd permanently join the tiles with appropriate amounts of contiguous land mass, using brackets, and attach magnets to the remaining edges in such a way that you could assemble them like a puzzle.
I'd rather have a gigantic globe (that can also be dismantled for moving or storage) than have a wall map.
Re:Printing a wall-sized world map and what I've learned fro...
by contravariant on Thursday April 30, 2015 @05:50PM
(#9467885)
Well, if you want something rectangular, preserving area, with vertical meridians then you automatically end up with a cylindrical area projection. If you want an aspect ratio of 3/2 (approximately) you end up with the Gall-Peters projection. Although if you're prepared to cut out part of the map then you have a lot more freedom in your choice.
Edit: Just discovered that if you prefer a conformal map instead of one with equal area then you end up with the Mercator projection.
Re:Printing a wall-sized world map and what I've learned fro...
by anc84 on Thursday April 30, 2015 @08:41AM
(#9464671)
Robinson or Winkel-tripel like National Geographic does.
Re:Printing a wall-sized world map and what I've learned fro...
by coldpie on Thursday April 30, 2015 @08:54AM
(#9464721)
Hammer retroazimuthal, back hemisphere. Which is, coincidentally, also my favorite skateboarding move.
Re:Printing a wall-sized world map and what I've learned fro...
by HCIdivision17 on Thursday April 30, 2015 @09:45AM
(#9464981)
This is really cool looking, and I have no idea what you'd use it for.
And this is just the neatest thing to play with: https://www.jasondavies.com/maps/hammer-retroazimuthal/
Re:Printing a wall-sized world map and what I've learned fro...
by fennecfoxen on Thursday April 30, 2015 @10:47AM
(#9465366)
"As a retroazimuthal projection, azimuths (directions) are correct from any point to the designated center point." (-- Wikipedia, which knows everything and is never wrong.)
It looks like one retroazimuthal variant (the Craig retroazimuthal) is sometimes called the "Mecca projection", so you know which way to kneel at sundown if you're into that sort of thing.
Re:Printing a wall-sized world map and what I've learned fro...
by fennecfoxen on Thursday April 30, 2015 @10:53AM
(#9465418)
Okay, hipster. Transverse Mercator, south-oriented. https://trac.osgeo.org/proj/wiki/TMSO
Which map projections would you choose? A difficult decision: http://en.wikipedia.org/wiki/List_of_map_projections