Your average, underfunded community or educational theater has 150-200 lighting dimmers, each at 2.4 kW. I can consume half a megawatt (200 circuits x 20A x 120V = 480kW) in 6 keystrokes.
http://www.energycentral.com/generationstorage/energystorage...
The other factor is that when you're operating at grid scale, it's overall changes to the grid flow that you're concerned with. A large city might have a peak load of 2000 MW, and the plant here could handle a fluctuation of 10% -- given the law of large numbers, that's a lot. Sure, you might be turning on a slew of light banks in any given period, but someone somewhere else could be cycling down a cooling plant, or resistance heater, or the like.
I suspect large rapidly cycling loads might also be at issue -- with electrified transit, light rail and trolley buses make high instant demands on the grid, and then return energy through regenerative braking. I don't know how such loads are managed, but they're substantial and I do know that utilities tend to segregate these from other residential and commercial circuits.
Compare against Beacon Energy's 25kWh flywheel storage units, which have a cost of $10,000 per kWh.
There are trade-offs. Beacon's system is very highly responsive (flywheels can pretty much take up or deliver as much energy as you want, with response in the second to sub-second level) directly receive and deliver electrical energy, and have extremely high round-trip efficiency (90%+, approaching 99%). As an alternative to spinning reserve they have benefits.
http://www.beaconpower.in/html/technology.html http://beaconpower.com/
The problems are the limited capacities of individual units (25 kWh isn't that much power at grid scale), engineering problems, notably precession (the Earth's own rotation about its axis is a concern for the units), and interesting failure modes (preferred deployment is burying the units in below-grade concrete containment with massive lids -- you neither want systems flying apart nor wandering about the neighborhood at 16,000 RPM should the come unmoored).
Flywheels are among the more expensive energy storage options available, but at least at first glance the cooling option looks reasonable.