Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by lmousselimis on Tuesday October 21, 2014 @04:05PM
(#8489562)
Hi all. If you want to feel better about your worst upgrade experience, I should inform you that mine started : Saturday, October 18, 2014 at 19:00 (local time Greece) and at this time is still stucked in : "2 minutes remaining" :)
Thank you Apple. I think nobody will ever beat this time!!! Not even windows v100!!! I think I'll go for the Guiness Record...
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by zzzeek on Friday October 17, 2014 @02:08PM
(#8472432)
Turned on cmd-L to see where it's at and I've got several pypy versions and MacTex in there, hundreds of gigs of files. Based on this new information which I so desperately wish apple made me aware of before running, I expect my install to take at least overnight. thanks apple for your consistently declining level of software quality!
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by ivarv on Friday October 17, 2014 @12:36PM
(#8471797)
Just a warning - after 6+ hours (not sure exactly as I went to sleep) my Yosemite install failed because the log buffer was full. I can't say for sure that this would not have happened if I hadn't left the log viewer open, but I would recommend closing the log window when you're not actively using it.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by ivarv on Friday October 17, 2014 @04:11PM
(#8473082)
Just happened again. The error is:
Line 128,493 - INSTALLER LOG SHARED BUFFER IS FUL
This time I only opened the log viewer briefly at one point during the upgrade, and again after several hours because it seemed to have hung again. I can't imagine I'm the only one who's affected by this issue. I'll report back when/if I find out how to fix it.
In the meantime I've restarted the process one more time. The laptop still boots straight into the Yosemite installer so I don't think the hard reboots have adversely affected the machine.
edit: It occurs to me that the longest I've waited has been 12 hours (my first attempt). I've now seen reports of 15 hour installs, perhaps I didn't wait long enough? Even if the log buffer is full, that wouldn't necessarily mean that install has outright failed... hmm
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by rmetzler on Saturday October 18, 2014 @09:31AM
(#8475284)
I upgraded this morning. Estimates where way off. (Thanks for the CMD+L hint!) After a few hours, the Mac just reinstalled everything again. Waiting again for hours with "1 Minute" point. Worst upgrade experience with OSX ever.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by podsnap on Friday October 17, 2014 @12:42PM
(#8471838)
I had 32k files using up 8GB in /usr/local, and the time spent on "2 minutes remaining" was about 45 minutes. In retrospect, I'm happy that I didn't waste any time on special preparations.
One thing I learned is that the ⌘L log window blocks progression from restore to the next reboot; I lost about 15 minutes that way.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by podsnap on Saturday October 18, 2014 @09:16AM
(#8475266)
Sorry, 32k was the result of `ls -lR /usr/local | wc -l` and then typing on a keyboard with a broken 4. To be much more precise, `find /usr/local -type f | wc -l` is 243185, while (including directories and links) `find /usr/local | wc -l` is 274709.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by podsnap on Saturday October 18, 2014 @09:27AM
(#8475278)
See my reply above. A more accurate count on a keyboard with working keys is 243185.
I'm starting to wonder whether the /usr/local-related delay is naturally about an hour, but vastly increased - sometimes catastrophically - by having the log window open. Just a theory.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by jlindley on Saturday October 18, 2014 @12:42PM
(#8475693)
I've gotten messages from people who didn't even know how to open the log viewer until hours into the process, so it's just a highly variable delay depending on individual circumstances.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by reuven on Sunday October 19, 2014 @12:09AM
(#8477187)
I wish that I had read this before upgrading. I have tons of stuff installed via Homebrew, and after two hours of "2 minutes remaining," and seeing in the logs that it was "restoring" stuff from /usr/local, I gave up and went to bed.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by cbsmith on Friday October 17, 2014 @12:58PM
(#8471946)
Not sure why the article hasn't considered this, but after moving /usr/local to another location and doing the Yosemite upgrade... you can always move the newly created Yosemite files/directories in /usr/local to your old local, rather than deleting them.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by jlindley on Friday October 17, 2014 @01:42PM
(#8472240)
I've re-written the instructions a few times since I first posted it. Once it gets into conflicts and problems I can't cover everything, and I don't want to give a dozen commands for people to paste in and run for various scenarios and then screw people up more. I'll add a note to merge instead of replace, though, thanks!
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by danbee on Saturday October 18, 2014 @05:14PM
(#8476336)
Just a note: if your shell is set to something in `/usr/local` (e.g. `/usr/local/bin/zsh`), remember to set it back to `/bin/bash` before doing the move.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by geneticgrabbag on Saturday October 18, 2014 @07:28PM
(#8476715)
Yeah, I got caught by this so I was unable to open Terminal or iTerm. But using Terminal, I ran "Shell | Run Command...", entered "sudo chsh -s /bin/bash myuserid" and was then able to open a shell and move the local directory back.
Other than that, the upgrade was very smooth. Thanks for the help!
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by brettporter on Friday October 17, 2014 @07:19AM
(#8470346)
It seems you really must move it to ~/local or similar as the article points out. Moving to /usr/local.bak seems to still copy the files one by one into recovered items during the last stage of the installation.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by bhartzer on Friday October 17, 2014 @10:13AM
(#8471048)
Good to know that it could take hours. Upgrading to Yosemite on a Macbook Air (about a month old) and it's taking a few hours so far. Didn't check /usr/local but will just let it go for now.
Re:Upgrading to Mac OS X 10.10 Yosemite as a Developer
by michae1m on Sunday October 19, 2014 @04:21PM
(#8479483)
took me >24 hours without completing. I rebooted into the recovery partition, mounted the disk, moved aside the stuff in /usr/local and then re-installed. I dread to think how long it would have sat there burning crud into the LCD
sudo mv /usr/local ~/local
then merge it back in
ditto -V ~/local /usr/local
That way it should merge all the files from the backup into the new folder (and show you what it's doing)
Thank you Apple. I think nobody will ever beat this time!!! Not even windows v100!!! I think I'll go for the Guiness Record...
Line 128,493 - INSTALLER LOG SHARED BUFFER IS FUL
This time I only opened the log viewer briefly at one point during the upgrade, and again after several hours because it seemed to have hung again. I can't imagine I'm the only one who's affected by this issue. I'll report back when/if I find out how to fix it.
In the meantime I've restarted the process one more time. The laptop still boots straight into the Yosemite installer so I don't think the hard reboots have adversely affected the machine.
edit: It occurs to me that the longest I've waited has been 12 hours (my first attempt). I've now seen reports of 15 hour installs, perhaps I didn't wait long enough? Even if the log buffer is full, that wouldn't necessarily mean that install has outright failed... hmm
https://twitter.com/kevinSuttle/status/513446291968651264 https://twitter.com/kevinSuttle/status/513447060499341313
Other than that, the upgrade was very smooth. Thanks for the help!