News for hackers. Stuff that matters.
Re:Plastc Card by skorecky on Tuesday October 07, 2014 @02:30PM (#8423001)
Wow, this will certainly give Coin (https://onlycoin.com/) a run for their money.
Re:Plastc Card by lost_name on Tuesday October 07, 2014 @02:34PM (#8423023)
Important difference: Plastic supports Chip & Pin, Coin does not.

Plastic: https://www.plastc.com/card#tech-specs

Coin: https://onlycoin.com/support/faq/#security

Re:Plastc Card by jrockway on Tuesday October 07, 2014 @03:32PM (#8423428)
I doubt that it actually supports Chip & Pin; it probably supports the kind where your card number can be read via those contacts, but still requires your signature to complete the transaction.

Another option is just proxying your card; their card has a valid chip & pin and credit card number, and when they process the charge, they pay for it by charging your actual card. If I recall correctly, the credit card companies don't particularly like this, but maybe things have changed recently.

Re:Plastc Card by guan on Tuesday October 07, 2014 @02:54PM (#8423163)
How they will support chip and PIN? Will they need cooperation from the issuer? If not, then they need to clone the cryptographic keys inside the chip, and I thought those were supposed to be tamper resistant.
Re:Plastc Card by seanmccann on Tuesday October 07, 2014 @02:38PM (#8423050)
Which is increasingly important because that "far date in the future" of October 1, 2015 in less than 12 months away.

On October 1, 2015 "Liability will shift to acquirers for domestic and cross-border counterfeit fraud card-present POS transactions if the merchant does not have an EMV-enabled POS device."

Over the next year nearly all merchants will switch over.

Re:Plastc Card by robbiet480 on Tuesday October 07, 2014 @02:40PM (#8423064)
Plastc also supports NFC
Re:Plastc Card by bravo22 on Tuesday October 07, 2014 @03:06PM (#8423271)
I'm calling shenanigans after reading their specs.

Here are my reasons:

NFC + EMV secure elements are issued by banks and can't be reprogrammed. You can't switch between them on the fly. You can only house "multiple" EMVs if you can by some grace of god magic convince the different banks, and Amex to take your card to their facility and program it with their secure info and then give it back to you.

E-ink displays are WAY thicker than they can fit in there. They are also made on GLASS substrate, much more fragile than something you want to put in your pocket. If you looks closely at the video the e-ink screen is faked by CGI. It doesn't perfectly register in the same location on every frame. There is a shake.

Driving an e-ink display requires high bias voltage, ~+/-20V. Often done via charge pumps with chips such as TI's TPS65180 (http://www.ti.com/product/tps65180). The chip alone (minus PCB) is thicker than a credit card and therefore a credit card slot. The switching capacitors you'd need to generate the voltage would also be too big to fit within that footprint.

Re:Plastc Card by mrb on Tuesday October 07, 2014 @04:11PM (#8423713)
"E-ink displays are WAY thicker than they can fit in there"

No, I have in my pocket a PayPal Security Key: it is the same size and thickness and flexibility as a credit card, yet it houses an e-paper display: https://www.paypal-community.com/t5/image/serverpage/image-i... They have been on the market for 5+ years, so the technology is there. Plastc has a bigger display, but there is no doubt it can fit in a credit card because an e-paper display does not require that much supporting circuitry. See this guy who tore down the PayPal card: http://www.stahlke.org/dan/displaycard/

Re:Plastc Card by bravo22 on Tuesday October 07, 2014 @06:07PM (#8424291)
You have a segmented e-ink display in there.

They have a full pixel display. They are different. E-Ink displays are 1.18mm thick per their spec sheet and you have to add some mechanically stiff backing to that.

Looking at a detailed photo [1] it looks like a STN segmented LCD but I could be wrong.

Incidentally, do you have a pair of callipers handy? Could you measure the PayPal Security Key?

I don't think it is the same thickness as a credit card.

[1] http://www.stahlke.org/dan/displaycard/front.jpg

Re:Plastc Card by cgjaro on Wednesday October 08, 2014 @09:23PM (#8430347)
I do have a PayPal Security Key. My calliper measures 0.81mm, compared to 0.78mm for credit cards. So it is indeed pretty much the same thickness.
Re:Plastc Card by bravo22 on Wednesday October 08, 2014 @10:11PM (#8430465)
Thanks.

I looked at more teardown pics. It is definitely a segmented display which is far easier to drive than an active matrix (i.e. "pixels"). They also don't have wireless and a host of other things that this device proclaims to have.

Re:Plastc Card by jrockway on Tuesday October 07, 2014 @03:37PM (#8423476)
There are several variants on the NFC protocol. Some contain secure elements (with a CVV3, which is a cryptographically-signed incrementing number), but I believe they can also just dumbly-send the normal card data over the air.

I've also seen credit cards made from glass. I think they're NFC-only, though, because of the thickness, but I could be mistaken.

Re:Plastc Card by bravo22 on Tuesday October 07, 2014 @05:33PM (#8424143)
You are correct in that the NFC is just a protocol but for it to be used without a signature you need a secure element. In their "mock-up" they show a smart car interface on the front and in the FAQ they claim EMV. It is very puzzling.
Re:Plastc Card by objclxt on Tuesday October 07, 2014 @08:10PM (#8424695)
> I believe they can also just dumbly-send the normal card data over the air.

Only while the US still is supporting that. Once the liability shift occurs next year it'll be EMV or nothing.

Re:Plastc Card by dmitrygr on Tuesday October 07, 2014 @03:43PM (#8423521)
Now I think this is a difficult-to-implement idea too, but not for the reasons you mentioned

1. eink can be made on flexible plastic and be very thin, and cheap too (see http://www.engadget.com/2008/09/08/esquires-e-ink-infused-ma...)

2. charge pumps can be made out of discrete components and the largest part is a coil, which can easily be laid flat and thin. You can also charge a ceramic cap (low self discharge) slowly and use it when you need to change screen contents, thus allowing you to have a smaller charge pump yet

3. PCBs can be made very thin (a cheap pcb fab I use will make 10 PCBs for $10 for me at 0.2mm thickness). And you can also make them on a flexcable that is thinner yet.

You are right about EMV though. It is supposed to be uncloneable.

Re:Plastc Card by bravo22 on Tuesday October 07, 2014 @03:54PM (#8423589)
1. With respect to e-ink on a flexible substrate... it was announced but I've never seen it happen. I've dealt with e-ink fairly recently on two projects. They don't have a flexible design to sell you beyond prototype. and for custom sizes Their MOQ to begin exploring a custom option is 100K units.

2. There is no coil in a charge pump :). They use capacitors and switches. There is no inductor. For a charge pump to drive an eink like screen you need caps of about 10-20uF. I've designed about 3 different boards that drive high-res e-ink screens. You can't get those caps below 1mm at the very best.

3. Are you sure you are getting 0.2mm PCBs? That is only 8mils thick! Most standard PCBs are 62 mils ~ 1.5mm. Can you tell me who these guys are that would do super thin at prototype prices? I would want to use them (no sarcasm).

Minimum IPC thickness for 4 layer board (which is what you need for the EPSON driver to those e-inks) is 12 mils but even at that you'll have mechanical problems with that PCB. Credit card thickness FYI is 30 mils = 0.030".

What I would say to these guys is: "show me a prototype with the appropriate thickness. You have a prototype, right?"

Re:Plastc Card by jkestner on Tuesday October 07, 2014 @04:26PM (#8423804)
A prototype is a requirement here. Seeing the team, I see no technical person, but two brand designers (just the people to make a great demo video). Not to say they don't have someone who can pull this off, but it is a thing that has not been done before exactly. Like Lockitron, Coin, and others before, the variety of physical interfaces involved plus the need for it to work 100% of the time make this non-trivial. This is not just a neat digital interface problem.
Re:Plastc Card by brentm on Tuesday October 07, 2014 @03:01PM (#8423222)
I can't help to think this and Coin are each a solution in search of a problem. Do you know many people that use more than 3 cards regularly? If the norm was to have so many cards they barely fit in your wallet this would be perfect.
Re:Plastc Card by atourgates on Tuesday October 07, 2014 @03:29PM (#8423411)
Well - I carry 3, and would carry 7 if I wasn't trying to slim down my wallet.

Those 3 are:

* An personal AMEX cashback card, that gives me a very nice 5% back in certain categories, and 1% back on everything else.

* A Visa Airline miles card, for places that don't take AMEX or travel spending where I earn 2x or more miles.

* A business Visa credit card for the business my wife owns.

The other cards I'd carry if I wasn't annoyed by a thick wallet are:

* A Costco AMEX that gives me extra cashback at Costco.

* A couple store-specific Visa cards that give me nice benefits at stores where I shop at least semi-regularly.

* A work credit card for my work.

I'm a bit of a miles/cashback junkie, but I'll bet many people have at least a few cards they'd like to consolodate. The average American family has 8.

Like I said in another comment, I'd be thrilled if I could replace all those with one card, and I'd be happy to pay what Plastc is asking if it worked. But the most likely scenario I see for that happening is mobile payments a'la ApplePay.

Re:Plastc Card by jrockway on Tuesday October 07, 2014 @03:41PM (#8423514)
I'm not a junkie, but I still have three cards:

One I use for everything, until their idiotic fraud department is confused as to how I'm spending money in Chicago after taking a flight to Chicago I bought with that card.

Another I use as a backup, for this situation.

Debit card, for extracting paper money from ATM machines.

Re:Plastc Card by atourgates on Tuesday October 07, 2014 @04:02PM (#8423654)
Oh yeah - I totally forgot about my debit card. So I guess I carry 4 and would carry at least 8 without space constraints.
Re:Plastc Card by slantyyz on Tuesday October 07, 2014 @03:18PM (#8423335)
>> Do you know many people that use more than 3 cards regularly?

It's not so much about use as it is about carry. I may use only 3 cards regularly, but I carry 13 in my wallet. Most of the lesser used cards are ID I have little choice but to carry or loyalty cards for places where I shop.

_IF_ the claims about chip and pin capability are true, I'd be able to pull out at least half of the cards in my wallet, which would be a significant amount of bulk.

Re:Plastc Card by kerkeslager on Tuesday October 07, 2014 @03:26PM (#8423383)
If it were just credit/debit cards, I'd agree with you, but this purports to support gift cards. I've had too many gift cards to carry around, and ended up not using them because when I was actually in the store they were at home. So I do think it does solve a problem. That said, the problem this solves isn't important enough to justify the price tag (for me).
Re:Plastc Card by kstrauser on Tuesday October 07, 2014 @03:27PM (#8423393)
It claims to support RFID, so I wouldn't have to carry my work door card. I'd strongly consider that.
Re:Plastc Card by slyhacked on Tuesday October 07, 2014 @06:22PM (#8424335)
Would your work let you put your details in a phone to be synced to a device like this?

Plus most door cards are 125Khz and NFC/credit cards etc use 13.5Mhz so I wouldn't expect it to be compatible.

Re:Plastc Card by joyeuse6701 on Tuesday October 07, 2014 @05:34PM (#8424154)
Korea
Re:Plastc Card by sbenario on Tuesday October 07, 2014 @02:47PM (#8423106)
I think the real question is who is more likely to ship an actual product.
Re:Plastc Card by poonjahb on Thursday October 09, 2014 @12:46AM (#8430870)
My question is whether these are the same people that came up with coin and this is simply another ploy to get people's money for a product that will never make it to market. Both domains are private registrations from GoDaddy. If either was a genuine corporate entity you would think they would have real information in their domain registration.