Re:What happens to retired airliners? See a tear-down of a 7...
by mnw21cam on Tuesday July 08, 2014 @08:38AM
(#8004207)
Kevin McCloud recently did a TV programme for channel 4 (UK), where they took a retired Airbus A320 and recycled as much of it as possible into non-aircraft related goods. I believe this was with the engines already removed.
Even if the engines are too old to re-use, the high temperature nickel alloys they contain are valuable for making new high temperature engine parts. There is a real scarcity of that type of material.
According to this they weight between 375 - 518 pounds and are ~6 feet tall, which is significantly more than they look. http://www.b737.org.uk/winglets.htm
Re:What happens to retired airliners? See a tear-down of a 7...
by smackfu on Tuesday July 08, 2014 @10:48AM
(#8004750)
Generally they would be older airframes where winglets weren't an option at the time of manufacture.
Also, if you are running a lot of short flights, fuel costs may not be your primary concern. For example, the 747-400D is a model meant for short domestic routes like between Japanese islands, and doesn't have winglets.
Re:What happens to retired airliners? See a tear-down of a 7...
by AlexMuir on Tuesday July 08, 2014 @08:00AM
(#8004055)
I was amazed by that figure as well. They are six-foot extensions that decrease fuel consumption by about 4 to 6 percent [1]. I'd imagine that insurance and warranties mean that operators can only use approved Boeing parts.
Re:What happens to retired airliners? See a tear-down of a 7...
by JunkDNA on Tuesday July 08, 2014 @08:30AM
(#8004169)
Classic example of pricing based on value to the end-user (in this case, a pretty nice fuel savings) and not on actual cost of materials. Something to keep in mind as a developer when selling your skills, software, etc...
Re:What happens to retired airliners? See a tear-down of a 7...
by TylerE on Tuesday July 08, 2014 @10:18AM
(#8004610)
Not so sure...consider how much is cost to engineer (probably at least a few millions + all the testing/certification costs) spread out over less than 10k units.
Re:What happens to retired airliners? See a tear-down of a 7...
by danbruc on Tuesday July 08, 2014 @08:16AM
(#8004121)
I wondered the same and found this thread [1] - they are obviously priced based on the added value, i.e. reduced fuel consumption - and not on material and manufacturing costs.
Re:What happens to retired airliners? See a tear-down of a 7...
by brixon on Tuesday July 08, 2014 @07:58AM
(#8004043)
http://en.wikipedia.org/wiki/Wingtip_device
"The winglets increased the 747-400's range by 3.5 percent over the 747-300, which is otherwise aerodynamically identical but has no winglets."
Re:What happens to retired airliners? See a tear-down of a 7...
by ChuckMcM on Tuesday July 08, 2014 @07:44PM
(#8007354)
I guess that isn't too surprising but other than the avionics and engines which seem relatively standard, I'm surprised that there is such a market for the other stuff. Presumably its people keeping jets flying that need replacement seats or that video screen from a specific version of in cabin entertainment systems.
People buy high tech stuff and part it out as well, so company A will sell their servers to the scrapman who will then resell hard drives, memory, CPUs, and HBAs and then scrap the chassis. I cobbled together several VAXen that way (buying 'disposed' ones and pulling enough parts to make a whole one).
http://www.channel4.com/programmes/kevins-supersized-salvage
http://www.mirror.co.uk/tv/tv-news/kevins-supersized-salvage...
Even if the engines are too old to re-use, the high temperature nickel alloys they contain are valuable for making new high temperature engine parts. There is a real scarcity of that type of material.
http://www.what2fly.com/operating_cost/boeing/747-300.php
The winglets save about 3 - 3.5+% fuel consumption. (from Boeing's website and Wikipedia)
So it only takes roughly 2000 hours of flight time to recover the costs from a used set of winglets ($650k each according to the article).
2000 flight hours is generally less than 2 years worth of flights for a normal 747-300. (Couldn't find a great source, didn't look too hard: http://www.airliners.net/aviation-forums/general_aviation/re... )
According to this they weight between 375 - 518 pounds and are ~6 feet tall, which is significantly more than they look. http://www.b737.org.uk/winglets.htm
Edit: doubled the hours, thanks bhousel
Also, if you are running a lot of short flights, fuel costs may not be your primary concern. For example, the 747-400D is a model meant for short domestic routes like between Japanese islands, and doesn't have winglets.
[1] http://en.wikipedia.org/wiki/Wingtip_device#Passenger_aircra...
Warranties - will they replace it if it breaks?
Regulation - will they sue the pants off us and ban us from flying if we use a non-approved part, regardless of whether it breaks or not?
[1] http://www.airliners.net/aviation-forums/general_aviation/re...
People buy high tech stuff and part it out as well, so company A will sell their servers to the scrapman who will then resell hard drives, memory, CPUs, and HBAs and then scrap the chassis. I cobbled together several VAXen that way (buying 'disposed' ones and pulling enough parts to make a whole one).