News for hackers. Stuff that matters.
Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by rjsw on Thursday March 27, 2014 @06:17PM (#7483903)
To get started with FPGAs just download one of the free IDEs and have a play. You can buy dev boards for under $100 to get some feedback that what you are doing really works.
Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by adamnemecek on Thursday March 27, 2014 @06:48PM (#7484060)
Can you recommend some boards? Whenever I looked into it, I got overwhelmed with all the options and I was not quite sure what to look for.
Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by zhemao on Thursday March 27, 2014 @08:12PM (#7484401)
The DE1-SoC board is $199 or $150 with a student discount. http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=E...

It has an ARM processor on the same chip as the FPGA, which I've found to be incredibly useful.

If you don't want the ARM processor, the regular DE1 is somewhat cheaper: $150 or $125 w/ student discount.

http://www.terasic.com.tw/cgi-bin/page/archive.pl?Language=E...

Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by kyzyl on Thursday March 27, 2014 @08:38PM (#7484540)
Yeah, the SoC boards a nice. So much of what you want to do on an FPGA these days requires the use of a processor anyhow, you might as well have an actual hard block instead of a NIOSII or whatever. We use DE1's at my company as the FPGA analog (pun not intended) of a Arduino Uno, for when we want to do a quick test of some part of a design in hardware, or want to stick the device into something but don't want to tie up a high end unit for something trivial.

Be aware that the DE1 has pretty limited resources for somethings. For exmaple, the on-chip memory can get tapped out pretty quickly when doing embedded applications, and it has less I/O and less RAM available off-chip.

Also note that the DE1-SoC actually uses a Cyclone V device, whereas the original DE-1 uses a Cyclone II, a nearly discontinued chip that is a big step down.

Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by pramalin on Friday March 28, 2014 @05:44AM (#7486152)
Intrigued by FPGA's capabilities, when checking out my classmate's profile http://orangesorter.com/, I started looking into some development kits to learn.

I found great documentation and economical boards starting at $55 available here: http://www.xess.com/store/fpga-boards/

BTW, I also found Scala based hardware construction language Chisel very interesting https://chisel.eecs.berkeley.edu/.

Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by damian2000 on Thursday March 27, 2014 @11:34PM (#7485199)
The "Parallella" hybrid board is awesome, but unfortunately has been saturated by orders, probably due to being $99. It contains a Xilinx dual ARM CPU with FPGA plus a custom Epiphany 16-core processor. http://parallella.org/
Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by JamilD on Thursday March 27, 2014 @06:58PM (#7484104)
The Altera DE2 is great to start off with, and it's also heavily discounted for University students.
Re:How many 32-bit RISC CPUs fit in an FPGA? Now vs. 1995? by coryrc on Thursday March 27, 2014 @07:08PM (#7484144)
The Basys 2 is a little old, but it's very simple and easy.