News for hackers. Stuff that matters.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by colanderman on Tuesday January 28, 2014 @10:26PM (#7141648)
Dual 10 GbE built-in? Sweet. Wonder what the price will be; a dual 10 GbE Intel card goes for $500 alone.

More importantly – will they provide zero-copy I/O like you can get with Intel network cards via their DPDK [1] or PF_RING/DNA [2]?

[1] http://dpdk.org/ [2] http://www.ntop.org/products/pf_ring/dna/

Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by donavanm on Wednesday January 29, 2014 @02:46AM (#7142558)
At $400 I assume youre thinking of something like an Intel X520 DA2 plus optics. If you can tolerate the power you can do 82599 with dual Phys for more like $150-200.

Obviously I have no idea on the network controller or its sdk/driver support.

Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by justincormack on Wednesday January 29, 2014 @04:35AM (#7142920)
You dont really want to buy a 25W SoC and then blow a load more power on the networking. It might be expected you use 802.3ap.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by donavanm on Wednesday January 29, 2014 @12:59PM (#7145541)
I was thinking of solutions for 10s of gbs on todays x86 boxes. Dollars and power are both a budget, so it's all a tradeoff.

WRT to the opteron A1100 yes, I could see your comment. Something like a box of A1100 blades plugging 802.3ap to a common backplane, a trident chip there, and then a bunch of (Q)SFP+ northbound. A couple hundred gbs for around 150 watts of networking.

When I see A1100 I think an IO node with 10s of SATA disks attached. In that case Im only getting 10 or 20 per rack. A backplane makes less sense to me, running two DAC phys per box to a TOR I could see.

Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by colanderman on Wednesday January 29, 2014 @12:21PM (#7145250)
Yes, I was. Didn't know this could be done cheaper, thanks!
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by eroullit on Wednesday January 29, 2014 @03:13AM (#7142657)
DPDK is Intel's turf and PF RING only supports igb/ixgbe/e1000 drivers. For out of the box usage, looking at Netmap or Linux PACKET_MMAP (though not entirely zero-copy) should be possible.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by colanderman on Wednesday January 29, 2014 @12:20PM (#7145248)
Nice. How did I not know about these. Time to do some research!
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by thrownaway2424 on Tuesday January 28, 2014 @11:41PM (#7141926)
I don't think that's "sweet" I think that's a bad decision. What if I don't need two of those per 10 arm cores? Now I'm just paying for gates I don't need.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by AnthonyMouse on Wednesday January 29, 2014 @12:24AM (#7142093)
What if you don't need AES encryption? Now you're just paying for gates you don't need. What if you don't need SIMD instructions? Now you're just paying for gates you don't need.

It doesn't matter. Modern processors have the complete opposite problem. It isn't that transistors are expensive, it's that they're so cheap you end up with too many and they generate too much heat. If you can stick a block on there which 60% of your customers can use and the other 40% can shut off to leave more headroom for frequency scaling, it's a win.

Also, the number of gates you need for a network controller is small.

Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by wmf on Wednesday January 29, 2014 @12:25AM (#7142098)
You haven't been paying for the silicon for a while; when you buy a chip you're really paying for the design and it's cheaper to design one chip with all the features people might need.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by marcosdumay on Wednesday January 29, 2014 @01:38PM (#7145818)
It's much cheaper to make a chip that both you and the other 99% of the people (that need 2 ethernet ports/CPU) need than making a specific chip for each market.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by vidarh on Wednesday January 29, 2014 @05:22AM (#7143061)
Then you buy a different chip if they're not cost effective.

As an entry into the server market, this sounds awesome; for things like storage aggregation and vm migration, gigabit ethernet is becoming a real bottleneck for many applications as the core counts has gone up.

Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by colanderman on Wednesday January 29, 2014 @12:23PM (#7145259)
In server farms, who cares if the processor costs $400 or $500. Energy usage is the biggest cost over time, and this silicon (presumably) isn't powered if it's not used.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by sitkack on Wednesday January 29, 2014 @01:05PM (#7145591)
We have more gates than we know what do with. There is little correlation with die area and end user price.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by kev009 on Wednesday January 29, 2014 @03:04AM (#7142625)
http://info.iet.unipi.it/~luigi/netmap/ is supposed to be generic to any NIC
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by justincormack on Wednesday January 29, 2014 @04:31AM (#7142902)
It needs some driver modifications, but they are not huge. It still only supports 3 or so of the most common cards on FreeBSD though.
Re:AMD reveals its first ARM processor: 8-core Opteron A1100 by kev009 on Wednesday January 29, 2014 @08:15PM (#7148434)
There's a new emulation mode in -HEAD http://beta.freshbsd.org/commit/freebsd/r260368