Re:How I Set Up My Home Network – NAS and Raspberry Pi
by johnpowell on Thursday November 28, 2013 @05:08PM
(#6816715)
Pi was 35. Then I needed a case (7) power adapter (5) SD card (10). So around 60.
And I can use the Pi for other stuff if I want. Keep in mind It runs the full PHT. Not the watered down version on the ATV2 which is what I previously used.
Re:How I Set Up My Home Network – NAS and Raspberry Pi
by sehrope on Thursday November 28, 2013 @05:13PM
(#6816745)
Just adding that the RasPi power supply is a standard micro-USB so if you happen to have one already (old phone or tablet charger?) and a spare SD card (old camera?) then you don't even need to pick those up.
Heck even the case isn't strictly necessary. I've got a similar setup at home and for quite a while mine was hanging off the back of my TV on a short HDMI cable.
Re:How I Set Up My Home Network – NAS and Raspberry Pi
by voltagex_ on Thursday November 28, 2013 @05:21PM
(#6816777)
While the later model B's are reasonably good with most chargers, you still want to make sure the charger is capable of at least 700mA.
Re:How I Set Up My Home Network – NAS and Raspberry Pi
by gmontard on Thursday November 28, 2013 @05:59PM
(#6816956)
If anyone hesitate you HAVE TO buy the B model! Much more power for so little money.
Re:How I Set Up My Home Network – NAS and Raspberry Pi
by OGC on Thursday November 28, 2013 @05:51PM
(#6816911)
My pi shipped with a plastic, semi-transparent box, if you don't mind the pink colour, you can turn it into a makeshift case.
Re:How I Set Up My Home Network – NAS and Raspberry Pi
by gmontard on Thursday November 28, 2013 @05:10PM
(#6816728)
I Paid my Pi 52 euros 6 months ago with a case and a USB charger. You can add $10 for a good SD Card and you're all set.
I paid $100 for a Roku box and 100% use it for PLEX, nothing else. Should have just bought a Pi...