They're cheap and you can plumb them right into the main tank, a bus would likely require several of them. If you insulate a vehicle besides exhaust fume collection you'll have to be very wary of condensation as well.
My experience is limited to converting a Fiat Ducato delivery van into a small RV:
http://pics.ww.com/v/jacques/cars/ducato/
On something the size of the bus in this article you could stuff the roof full of solar panels and install an inverter + a battery pack, then use that to drive a regular AC. A bit over the top maybe but with that much roof surface it is an interesting option.
Myself and a few friends are working on slightly more 'extreme' motorhomes (based on military 6x6's), designed for unimproved roads and long-term travel.
We're all somewhat independently employed, so the transition to a mobile life is a no-brainer. Hope to see more people in our industry take advantage of their freedom, too!
Any link to your projects? 6x6 sounds interesting :)
j
http://www.pirate4x4.com/forum/expedition-vehicles/955676-ma...
Naw, man. You need a _big_ generator.
source: I also bought a bus.
Next year I plan on going solar, when time permits.
What kind of Bus? Where are you starting out from?
If you hit the Bonneville salt flats at night, you might find fire-dancing on the flats near the rest areas.
The rest areas in Nevada have fresh drinking water, so you can save some weight by waiting to fill your water tanks.
Shoot me an email electrodynatronic von gmail if you like. I might have a few more tips if you're interested.
-Good luck
As an alternative, a heat exchanger ventilation system may work. This way, you can maintain a comfortable temperature indoors for a bit longer while still ventilating.
- make sure it is periodically inspected
- keep a hawk eye and a dogs nose out for anything suspicious
- get a fire extinguisher and a fire blanket, learn how to use them
- make sure the vehicle is very well ventilated
- always ventilate for a few minutes before starting / igniting anything
- if you suspect something is wrong check with soap, not with a match
Gas explosions in RV's and mobile homes are unfortunately not rare at all.
No, they are not.
It does not help that, as my brother-in-law found out the hard way, one of the effects of being exposed to the gas is that you become groggy and lose judgement. He's luckily still alive, but with serious scarring on about 1/3 of his body.
Therefore develop good habits. Be religious about it. It is only the fact that it IS a habit which will cause you to do the right thing when you need to and have impaired judgement.
I forgot to add one more thing in the list, which is that gas will pool at the bottom of enclosed spaces and it can blow up on you even when you think there is none.
Would you mind elaborating on this point? I don't know what you're referring to.
source: I've somewhat nervously watched old-timers do this. I've also accidentally discovered leaky welding torches this way.
But if you're doing it with city gas, it's lighter than air and can pool between joists.
Really, just go mix up the spray bottle of soapy water. It works great for non-flammable gases too.
You can seal it! Yes, you can, absolutely. The question, remember, is what happens when you seal it and accidentally miss that one critical leak (of which there are many) through which the exhaust then hotboxes you in your nicely sealed cabin.
Used this on a house with single-pane windows growing up.
Works amazing, simple and cheap.
I'm with you on that point. What's the least flammable insulation available for body filling, fiberglass?
Edit: ceramic or rock wool perhaps, but mind the dust and know which treatments were applied.
Hank certainly has other options. He can stay at RV camp grounds and use their hookups. He can buy massive banks of batteries. He can travel only in good weather in temperate climates. I'm just speculating assuming none of these are acceptable options.
It's far better to run an old one into the ground.
You don't even need to go looking for the production "costs" of the vehicle. Just think of the distance that all the different parts of your new vehicle have travelled before they're put together... and then shipped to your country.
http://www.edn.com/electronics-blogs/readerschoice/4368147/A...
[1] Past personal experience: Many of the elderly people I have seen go through car crashes in which the airbag deploys experience injuries from the airbag that often lead to their death or convalescence. Of course, they would have fared no better without the airbag.
This has some interesting references: http://www.salon.com/2008/04/21/ask_pablo_cars/
The best of both worlds is to ride an old chassis with a modern/freshly rebuilt engine. Both frugal and low pollution. There's no reason to run the chassis into the ground using an engine that's burning oil and choking on the gas.
Partially agree! Modern engines, or a properly rebuilt & maintained engine, can do great things for an older chassis. That said, a rolling chassis can and will wear out. There comes a time where replacing all the failing parts is a losing proposition both for you and Earth.
But from a pollution point of view not even close.
PS. Shipping is not really that expensive in terms of energy.
Your purchase of that already-extant vehicle will trigger production of another in today's very tightly-managed-inventory world.
Increasingly, even automobiles are made to order (c.f.: Tesla).
Darren from Hak5 is touring across America to hacker spaces and the like, and he did something like that[0] which surprisingly was used to power more than I thought would be feasible. And this was on a sprinter van, so with a bus like this, one could get 4x the amount of energy.
Sample window air conditioner: http://www.sears.com/kenmore-15-100-btu-room-air-conditioner...
1410 watts, AKA 2 horsepower.
Old fashioned space heater: http://www.sears.com/kenmore-oil-filled-indoor-heater/p-0327...
1350 watts
If one of those units is enough for the bus, and it's on 30% of the time that would mean around 250 W per hour power requirement, resulting in 6 kWh over the day.
In a reasonably sunny environment, solar panels can get 100 W per square meter. Let's say there are around 15 sqm available on the roof, yielding a total of about 12 kWh over the day - that's assuming around 8 hours of sun. If that doesn't work out due to latitude, it would be relatively easy to design panels that can be unfolded, providing extra area and serving as an extensible roof at the same time.
If batteries and inverter don't swallow more than 50% of that yield, it should be enough to drive a normal AC, lighting, and a laptop, maybe even a small fridge. You'd need a backup stove for the winter though.
This is why some full time RV'ers are picky about what state they are in for a given season. If you're in Texas, or another hot climate in the summer in a large bus, you'll need two or three tons (24,000 to 36,000 BTU) of A/C capacity (sometimes more!) to keep it habitable through mid-day and late afternoon.
If you have a large (cover the roof) solar/battery/inverter system, you can run all night without having generators start (and interrupt everyone's sleep) in most cases.
Most people that I know of use LP for heat.
Many of the comments here about cooking fuels being heavier than air are correct about the danger- nothing that proper ducting and a bilge pump could not handle. In order to live like this you must adopt a camping lifestyle. Everyday life activities, such as cooking and bathing, become more like camping and require more preparation.
edit-poor formatting, sorry. I meant the asterisks to be bullet points.
That being said, I feel like one would probably better off trying to solve the heater on the cold night problem by first approaching it from a fluid dynamics perspective (kind of like a glycol HVAC) and then using minimum energy for things like a pump. Though that is probably outside of the scope for this specific project, but it is probably worth looking into for those interested in building on what is going on here.
Natural gas would be ideal, gasoline in a good engine second best.
Vehicles leak like sieves unless you seal them up yourself, which could be a catastrophically bad idea if exhaust starts to find its way into the vehicle while it is running.
Aside from opening windows or bundling up and shivering, your cooling/heating options are either typical house HVAC appliances, or extending the functionality of the onboard heating and cooling and hoping that you bought a diesel, which are much more tolerant than gasoline engines of idling all day. Which brings me back to the risk of exhaust gasses when the passenger compartment is mostly sealed.
For electrical power to run appliance-type HVAC, you could use a small generator.