News for hackers. Stuff that matters.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by rogerbinns on Thursday January 10, 2013 @10:21PM (#5041163)
Dear display industry,

Please please please increase vertical resolution. I look back on the days of 16:10 fondly and wish we could end up back there or better.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by mhd on Friday January 11, 2013 @11:08AM (#5043241)
We (sadly) moved away from 4:3 permanently, but 16:10 is hardly gone. Sure, as they make a lot of FullHD panels nowadays, a 1920x1080 display is very common, but you still can get 1920x1200 displays from almost any manufacturer, albeit at a higher price (and quite often higher quality).

And you can get 16:10 versions of those IPS panels, which then sport a 2560x1600 resolution. About $550+ if you buy from the same Korean dealers (search for e.g. "Crossover 30Q5").

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by notatoad on Thursday January 10, 2013 @11:18PM (#5041318)
16:9 is a lot more tolerable when the "short" side is still 1440px tall. The aspect ratio makes a lot more sense at a 27" size than it does in a 13" laptop.

Sure, I'd prefer 2560x1600 than 2560x1440, but it really isn't a big deal.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by jdietrich on Friday January 11, 2013 @02:50PM (#5044593)
Forget about the aspect ratio of the panel - with enough useable pixels, it's all but irrelevant.

I use one of these cheap 2560x1440 displays. 99% of the time, I treat it as two portrait displays, each with an effective resolution of 1280x1440 (8:9 aspect ratio). My ideal monitor would be an enormously wide curved display, providing a similar workspace to a triple-monitor setup but without the inconvenience of bezels.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by ars on Thursday January 10, 2013 @10:54PM (#5041261)
Get the Asus PA248Q.

It's a calibrated IPS monitor, 24" 1920x1200 (i.e. 16:10).

I have one and it's great.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by ericabiz on Thursday January 10, 2013 @11:16PM (#5041312)
I have both an HP LP2475w (24" 1920x1200, IPS) and a 27" 2560x1440 monitor--the same resolution as mentioned here. (I didn't want to deal with potential dead pixels and scaling issues, so I forked over the $700 for the Asus PB278Q instead of buying the off-brand.)

Honestly, I hate using my HP now. It's a great monitor, but the 2560x1440 resolution on the Asus is amazing. Side by side, the Asus knocks the HP out of the park.

TLDR: It is not worth the downgrade in screen size and resolution just to get a 16x10 aspect ratio. You will never regret going for the 2560x1440 monitor instead.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by lmm on Friday January 11, 2013 @06:07AM (#5042202)
It's a pain to cart around, but I love my 10-year-old 2048x1536 CRT, and am alternately amused and saddened that modern displays still have a smaller smallest dimension.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by mtgx on Friday January 11, 2013 @09:13AM (#5042710)
New technologies are usually better in some aspects in worse in others. Like LCD was a lot better for the thickness factor, but it took ages to make them the same quality as CRT and for the same reasonable price.

Now we're seeing this with OLED displays, too. Much better contrasts, and even having some special properties like being bendable, but cost more than regular LCD's or even IPS LCD's.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by jdboyd on Friday January 11, 2013 @02:15PM (#5044399)
I had one of those at home. I took the hit on resolution and color to go LCD because the LCD's at work didn't make me feel as tired as the high-res CRT at home did.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by lmm on Friday January 11, 2013 @04:39PM (#5045213)
I had the opposite; for a long time LCDs gave me headaches, I think because they were all 60Hz. (Recently I've bought a laptop with a 120Hz display, which doesn't give me headaches).
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by rogerbinns on Friday January 11, 2013 @01:41AM (#5041654)
I have a 28" and a 24" both running 1920x1200 so that wouldn't be an upgrade. I think I bought almost the last monitors running at that resolution! I'd be happy replacing the 24" with something larger but it looks like the 27" 16:9 will actually be less vertical space.

My monitors are CCFL so they use a lot of power hence the desire to replace them eventually.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by SquareWheel on Thursday January 10, 2013 @11:19PM (#5041322)
I really like 16:10, not sure why 16:9 is so much more common.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by midko on Friday January 11, 2013 @05:11AM (#5042093)
16:9 are physically smaller and use less material yet able to maintain the same screen size specification as a 16:10 monitor. Hence such difference is often missed/ignored by the ordinary customer and hence manufacturers are able to get away with this. In other words, 16:9 monitors == higher profit margins
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by beedogs on Friday January 11, 2013 @06:17AM (#5042229)
The way I understand it, these panels are all basically cut from one continuous sheet in the factory, so it's difficult to re-tool a line to produce "taller" panels.

It sucks, because I like 16:10 too.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by mixmastamyk on Thursday January 10, 2013 @10:38PM (#5041228)
Put the monitor in portrait mode, awesome for code and browsing ... just about anything that isn't a movie.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by riobard on Thursday January 10, 2013 @11:57PM (#5041404)
Portrait mode will screw subpixel rendering of text.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by gcr on Friday January 11, 2013 @12:26AM (#5041466)
In most linuxes, you can ask for vertical subpixel hinting, at the very least from the command line.

I'm pretty sure that Windows has a setting for it too buried in the graphics card display settings somewhere.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by mstromb on Friday January 11, 2013 @02:20PM (#5044423)
It's under "Adjust ClearType text" on the control panel in Windows 7. It's also known as "ClearType Text Tuner."

It doesn't specifically ask you to pick your subpixel layout, but rather shows you a bunch of different renderings and asks you to pick the one you think looks best.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by riobard on Friday January 11, 2013 @10:56PM (#5046442)
Unfortunately vertical subpixel rendering is much less effective than horizontal rendering due to the nature of latin scripts.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by rbanffy on Friday January 11, 2013 @07:10AM (#5042343)
Not at all unless you fail to set it up properly. With Ubuntu, at least, it's trivial: IIRC, it's in the font properties panel.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by FootballMuse on Friday January 11, 2013 @11:09AM (#5043254)
You realize we are talking about a 2560x1440 monitor right?

Depending on your DPI settings, one can consider turning off subpixel smoothing at this res. At 4k you should certainly consider it. Plus, I'm sure various implementations are better than others. Does the iPad have this problem?

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by riobard on Friday January 11, 2013 @11:02PM (#5046452)
True, it's a 2560x1440 display, but it's not “retina“ yet. There is still a big difference with and without subpixel rendering, especially for smaller texts. Well, at least to my “retina” spoiled eyes. YMMV.

iOS does not use subpixel rendering at all, possibly due to the inconsistence of text rendering in different orientations.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by mixmastamyk on Friday January 11, 2013 @06:51AM (#5042299)
"Just works" for me.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by rogerbinns on Friday January 11, 2013 @01:45AM (#5041662)
That requires having a stand that can accommodate the monitor that orientation - something neither of my existing displays can do. And you've just moved the problem around since a wider display would still be preferable.

I'd be really happy with three huge 4:3 displays but that will never happen.

Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by mixmastamyk on Friday January 11, 2013 @06:59AM (#5042322)
If you're not in the market for a new one, then its moot.
Re:Monoprice Announces 27-Inch 2560 x 1440 Monitor for $390 by mertd on Thursday January 10, 2013 @10:47PM (#5041242)
The output quality depends on the panel type. If it is IPS like these, then viewing angle doesn't matter but some other panels look awful even from a slight side angle.