Some younger folks seem to be into all sorts of classic tech these days, like vynil, mechanical keyboards and terminal emulators. But I'm yet to see people giving old modems are try... Probably because there is nothing waiting for them to call anymore :(.

(telnet doesn't count)

Not just that, but, as I understand it, with some of the modern digital phone systems, they won’t work properly even if you did have someplace to call.

And 2400 baud was quite useful for a personal NNTP feed.

A pair of smart modems should certainly be able to connect, but it's very likely they would only be able to negotiate a fairly low speed. The classic 300 baud Bell 103 modulation can probably work perfectly fine even over early 2010s Skype. Although possibly with a lot of dropped bits...

I remember dialing into a BBS in the mid 2010s over an international phone call going through a late-stage digital switch locally (possibly one of the later AXE switches but I have no way of knowing for sure anymore), and the call would almost have to have gone through lossy compression on its way to the US.

300 baud will not work. arp/tcp/ip have too much overhead even with small MTU.

slip/plip/ppp is workable from 1200 baud up.

Yep. Much of the old phone system has now transitioned to highly-compressed, packetized voice running over IP rather than the traditional synchronous SONET infrastructure. While SONET might be used on some links, the whole link is dedicated to packetized data and it’s not carving out a single synchronous voice channel anymore. It’s the lossy compression that will have the most effect on the old modem signaling.

I was looking for info about connecting a Beeb to a Linux machine as a terminal, and found this guy using a modem for this:

https://www.youtube.com/watch?v=5QLcx2bvMbA

I'm going with a RS423 to USB cable.

IIRC the Minitel had a TTL level serial port that’d work at 4800 bps.

9600 even! :)

Computer to Minitel ttl yes. However the modem part was limited to those paltry figures.

I still have mine in the basement. Maybe its capacitors are all busted…time to give it a spin !

I think mine tops out at 4800.