News for hackers. Stuff that matters.
Re:Show HN: I replaced a $120k bowling center system with $1... by profsummergig on Sunday July 19, 2026 @06:42PM (#48972359)
I want to start working with arduino/raspberry pi/esp32/sensors.

What would be a good source to buy these in bulk (along with accessory components. e.g. wires etc.)?

Re:Show HN: I replaced a $120k bowling center system with $1... by gregsadetsky on Sunday July 19, 2026 @06:55PM (#48972425)
Take a look at adafruit and sparkfun

You can find kits that have a selection of sensors - enough to get started and experiment

https://www.adafruit.com/product/193

Re:Show HN: I replaced a $120k bowling center system with $1... by 0x62 on Sunday July 19, 2026 @06:58PM (#48972450)
Aliexpress is king for cheap IoT modules/accessories

https://www.aliexpress.com/w/wholesale-esp32-s3.html

Re:Show HN: I replaced a $120k bowling center system with $1... by dns_snek on Monday July 20, 2026 @03:16AM (#48975282)
I'd go with a more reputable vendor unless you're on a really tight budget because Aliexpress isn't even that cheap, all things considered. There are fake chips and really low quality parts out there that will waste your time.

You can get a range of ESP32 boards from Digikey for $5-$8 and you'd have to scrape the bottom of the barrel to get them much cheaper than that on Aliexpress.

Re:Show HN: I replaced a $120k bowling center system with $1... by rufasterisco on Sunday July 19, 2026 @11:08PM (#48973949)
If you have a nearby hackerspace or similar, check it out.

Likely they will be able to help you choose and guide you.

For me the hurdle was less about finding equipment and more being able to learn from experienced people.