News for hackers. Stuff that matters.
Re:Artemis II is not safe to fly by idlewords on Tuesday March 31, 2026 @01:46AM (#47583191)
The Apollo command module used Avcoat, the same material as Orion. But there are two key differences:

1. The application method is different. Apollo applied it to a metal honeycomb structure with very small cells, while Orion uses blocks of the material. (NASA tried the honeycomb approach for Orion, but it was too labor-intensive).

2. Orion is much bigger and heavier than the Apollo command module. The informal consensus is that Apollo may have been at the upper size limit for using Avcoat.

Re:Artemis II is not safe to fly by wiseowise on Tuesday March 31, 2026 @01:51AM (#47583236)
> NASA tried the honeycomb approach for Orion, but it was too labor-intensive

So cost cutting, as always.

Re:Artemis II is not safe to fly by lanternfish on Tuesday March 31, 2026 @01:56AM (#47583266)
Engineering is done in the context of constraints, cost is one constraint - and its a relatively conserved constraint. Saving labor in one area allows for more care in other areas. Especially given that labor is often not cost constrained, but skill constrained, which is less elastic.
Re:Artemis II is not safe to fly by idlewords on Tuesday March 31, 2026 @02:11AM (#47583363)
You would be the first person to ever accuse the Orion program of cutting costs.
Re:Artemis II is not safe to fly by shiroiuma on Tuesday March 31, 2026 @02:56AM (#47583690)
There's different kinds of costs: cost to the government, and cost to actually build the thing.

The contractor has no trouble inflating the first one whenever they can, but they want to strip the second one to the bone to maximize profits.

Re:Artemis II is not safe to fly by randomNumber7 on Tuesday March 31, 2026 @12:28PM (#47589847)
More precise would be:

NASA is an organization that is dysfunctional and way too expensive for what it does. It then decided to use agressive cost cutting to cover up these problems.

Re:Artemis II is not safe to fly by namibj on Tuesday March 31, 2026 @02:22AM (#47583441)
The fix for not doing that by hand is to get a robot to do it, given the applicator is human-held, a human-strength Kuka with enough reach to cover the area it can handle before the applicator needs refurbishment of some sort which would give a good opportunity to move the robot to a new section of the heat shield.
Re:Artemis II is not safe to fly by adgjlsfhk1 on Tuesday March 31, 2026 @01:58AM (#47583282)
Apollo was ridiculously expensive. it was a proof of concept, but not sustainable for long term exploration
Re:Artemis II is not safe to fly by ponector on Tuesday March 31, 2026 @03:01AM (#47583722)
How expensive in comparison to the nuclear submarines or nuclear carriers?
Re:Artemis II is not safe to fly by XorNot on Tuesday March 31, 2026 @03:30AM (#47583909)
At its peak the Apollo program was about 6% of US GDP.
Re:Artemis II is not safe to fly by azernik on Tuesday March 31, 2026 @06:01AM (#47584998)
About 4% of the federal budget and 6% of discretionary spending at its peak, not of GDP.

Still a very high number, but nowhere near the military-budget-levels you're talking about.

Re:Artemis II is not safe to fly by JumpCrisscross on Tuesday March 31, 2026 @06:30AM (#47585259)
> How expensive in comparison to the nuclear submarines or nuclear carriers?

SLS already costs about as much as a nuclear submarine. Per launch.

Re:Artemis II is not safe to fly by ghc on Tuesday March 31, 2026 @08:30AM (#47586371)
The Apollo program cost about as much as 22 Gerald Ford class nuclear carriers.

Amortized over the whole program, each launch cost the same as building 2 Gerald Ford class nuclear carriers, or $26 billion USD.

Re:Artemis II is not safe to fly by XorNot on Tuesday March 31, 2026 @03:28AM (#47583905)
Labor intensive methods aren't automatically better: you have more manual steps which must be done perfectly and validated etc.
Re:Artemis II is not safe to fly by sokols on Tuesday March 31, 2026 @04:39AM (#47584370)
For the Apollo spacecrafts:

> The paste-like material was gunned into each of the 330,000 cells of the fiberglass honeycomb individually, a process taking about six months. [1]

[1] https://en.wikipedia.org/wiki/AVCOAT#Apollo_Command_Module

Re:Artemis II is not safe to fly by xboxnolifes on Tuesday March 31, 2026 @01:43PM (#47590947)
Thats what engineering is. If you dont have to consider cost or labor, a lot of engineering becomes much easier.
Re:Artemis II is not safe to fly by plaguuuuuu on Tuesday March 31, 2026 @03:33AM (#47583926)
too labor intensive - each launch already costs like $1bn, how bad can it be
Re:Artemis II is not safe to fly by stingraycharles on Tuesday March 31, 2026 @05:22AM (#47584737)
As explained in the article, it’s typical margin cutting.
Re:Artemis II is not safe to fly by ibejoeb on Tuesday March 31, 2026 @05:06AM (#47584585)
How reliable is this information?

Just out of curiosity, do we know if the honeycomb method worked before it was deemed too labor intensive? Because I'm told that using this block method results in chunks blowing out.

I'm also having a problem with this set-up: Apollo is at the upper size limit for avcoat; Orion is way bigger; use avcoat.

Reading a real front-fell-off aura from this project. It makes me wonder if spending 6% of GDP to develop and run a crewed lunar program 60 years ago and then immediately destroying the evidence, r&d artifacts, and materials fab capabilities was a good idea.

Re:Artemis II is not safe to fly by garaetjjte on Thursday April 02, 2026 @11:26AM (#47615758)
Apparently, it worked too well in Lockheed Martin opinion.

>Temperatures on re-entry “were lower than we expected” on EFT-1, Hawes told reporters here during Lockheed Martin’s annual media day.

>That data supports a Lockheed Martin proposal to scrap the current heat-shield design, which features a 5-meter-diameter honeycombed frame, in favor of an alternative composed of rectangular heat-resistant tiles glued together with a silicone-based adhesive, Hawes said.

https://spacenews.com/lockheed-martin-pressing-to-simplify-o...