I have a C1, and I got the technician's remote to try this. But it didn't work in my case - it seems that only some of them use the same hardware, probably based on supply chain needs. Still though, amazing screen. Takes a bit messing around with picture settings (there's some good guides online) but I've never found the "TV" parts to get in the way, just connected it via HDMI, put it in PC mode, disable wifi, and it's good to go. I guess I've been using it around 4 years now.
The only serious issue is the shininess of the screen. It's not terrible but I did have to rearrange my office a bit to make sure it wasn't facing a window.
edit: Apparently I specially have C3PUA according to the model data I added. Also if anyone is interested in this, I can update the README because I didn't change it after I forked it.
(In Proton's Wireguard Configuration Wizard, I've selected "Block malware, ads, & trackers" - see: https://protonvpn.com/support/netshield)
At that point, you need more complex routing than what a simple DNS blocklist can provide via Pihole, and if you want good throughput, you're going to want real networking hardware and not a RPi.
Bought and connected an apple tv, always switch on the tv with that. Most problems solved.
I personally love the Art Mode, but while browsing the service menu I've noticed that you can permanently disable it. You can make the secret menu appear by pressing some special combination or by pressing 2 buttons on the service remote[0].
[0] https://www.amazon.com/AA81-00243A-Replaced-Service-Control-...
I actually like the idea of art mode, but I'd only want to use something like that if it were a passive technology like e-ink. Otherwise I think the electricity use and wear and tear on the display would eat at me. The device is well built and the presentation is lovely, but I just can't stomach the idea of it burning electricity all the time. (I don't know what its standby draw is, sadly. I do have a lot of stuff on power strips because I worry about standby draw. You're making me realize that this TV, being built-in to the wall, has escaped that scrutiny.)
What is the method you mention? A top google result seems to be [1], which says
> All release versions of webOS 9 ("webOS 24") are patched. This means 2024 models and older TVs that have been upgraded to webOS 9 will require another exploit such as faultmanager-autoroot [2].
and [2] says
> As of 2025-08-24, the latest firmware for essentially all LG models running webOS 5, 6, 7, and 9 is patched.
I went with Samsung QN90C instead and I'm super happy with it. It's very bright, fights glare well, and there's Jellyfin for it.
Is this firmware bit flip known? couldn't find anything off google.
Apparently the only fix is to disable it in your source, but it works like 75% of the time and I'd hate to lose the excellent picture quality of Netflix and YouTube via Google TV.
YMMV.
WebOS is trash too.
Probably going to buy a Sony next time.
And don't even get me started with creating an LG account just to get anything working on the TV like downloading a system update.
You can disable most of the WebOS trashiness by Googling and digging through the settings. Once you get all the ads fully disabled, the OS is extremely clean and snappy.
And FYI Sony's OLED panels are made by LG. The Sonys are a bit better because of the software, but they're almost always more expensive, but if you can score a good deal they're definitely the way to go.
I just can’t understand why there is a need for a remote app to do anything besides start to a tv remote. Well, I can, the poison apple of advertising as an additional revenue stream, but it’s still infuriating. I have an older Roku TV and that app has progressively gotten worse. it used to just be ideal, start, auto connect to the last connected tv, and immediately go to the remote. Now it’s a bunch of promotional content by default and you have to tab over to the remote. LGs is far more obnoxious and difficult to navigate. Absolutely inexcusable for displays that can cost $2500+
> I Second avoiding Samsung.
I'll third this, as a Samsung owner who uses it as primarily a monitor. My "favorite" feature is that when I use an app like Netflix and then press the "Exit" button on the remote there's a 50% chance I just land back on my desktop and a 50% chance that the menu that covers the bottom third of the screen is open. It can also frequently not find the signal of the computer, maybe 1 in 50 times. Sometimes it'll connect in a few seconds, sometimes a few minutes, sometimes after replugging the HDMI, and sometimes updating the screen by doing things like pressing buttons that would cause something to change (my computer neither hybernates nor goes to sleep). Not to mention that it frequently will ask me to update the terms of service (I cannot reject them, I can only select "remind me later" and it starts to get aggressive) and it will change some settings when it force updates on me.Do not get a Samsung...
I have not looked into hacking the firmware to change this behavior but if there's a "custom rom" out there that can do this, I'd appreciate a link!
One of the best things about LG in general is their serial port. It's hit/miss which of their models will have it exposed on the back, but if yours does, the protocol is well documented and is very simple.
My LG TV (used as a monitor) is really chatty on the network and so I keep it disconnected so I don't get periodic interruptions from little overlays telling me that $someApp has been updated and needs me to agree to new terms (yes, really!).
To re-gain remote control for automation, I use the serial port. I have an ESP32 connected to a mmWave sensor for active "at desk?" detection. This is integrated with Home Assistant which knows which PC my KVM is pointing to and if it's on or not. This lets me re-implement basic "if not at desk and no PC is on, put the display to sleep" automation.
My biggest complaint is more of an ecosystem issue; why is DisplayPort not common on TVs? Because this TV-As-A-Monitor is HDMI only, my KVM has to be HDMI and so does every PC that's hooked up. Would have been a lot nicer if the whole chain could be display port :/.
Text is very readable, refresh rate is good. It uses the same panels as the fancier G series in the larger sizes. One can root the firmware to make it go brighter. (Though this is screen works well in medium or dimly lit rooms. It does not shine in very bright rooms).
Plenty of YouTube videos singing the C series praises as a TV / Monitor.[1] LG webOS is also trivial/friendly to root in developer mode and network control of the tv is a nice to have.
Would avoid Samsung. I love the matte on the Frame and the design of the Serif but the OS is frustrating / impractical to root.
[1] https://youtu.be/Qtve0u3GJ9Y