IMO the durability problems in early generations of products tend to be "real", because there are still real engineering problems that aren't understood, and there isn't (generally) a super limited market. Once the engineering problems are solved and the market is fully saturated, there is suddenly an incentive to add planned obsolescence. I don't have any data to back up this claim though.
If you have a product that's been in the market for a while and it looks like it's meeting service life expectations you start looking at it trying to find ways to save money by substituting cheaper parts. You swap out metal gears for plastic gears, for instance.
If these parts have a shorter service life, but the service life is still longer than the warranty, then maybe that's a win in two ways for the manufacturer.
Great, till the motor that drives the gears jams. When the gears are metal,the expensive part (the motor) is more likely to lose. When the gears are plastic, the motor survives and you need to replace the gears with nylon ones or 3D print your own.
The plastic gears may not always be designed as a sacrificial part, but most consumers unfairly dismiss the possibility immediately
This comes down to warranty too. If it fails during the warranty period, which one does the OEM want to pay to replace: the expensive motor, or the cheap gearing?
Modern phones are examples of too much power for too little reason as far as I am concerned.
That’s not necessarily malice. Using lots of glue makes the device stronger, and making glue that a) glues really well (if there’s as good as no bezel, how is the screen staying attached to the phone otherwise?), b) lasts for years in any climate and c) can be easily removed isn’t an easy problem.
In any case, all it takes to repair a phone with a glued screen is a two face suction grip for about 20 dollars and an ordinary hair dryer.
The nasty part of a phone repair, I will admit that, is scraping off the glue gunk - I had to repair a Google Pixel once where the battery was dead, and during removing the glue on the display unit border I apparently managed to damage the seal between the OLED display and the glass, exposing the OLED to oxygen which led to eventual oxidization and a new display panel.
Which is a positive in my book, it means I know where to start if I need to get into the thing.
Apple has a high profit margin on their products so I expect better. This isn’t a cheap laptop from a supermarket.
I suspect this is a classic example of corporate beancounting at work, even if it just a dollar or two per machine, at Apple's volume of millions of machines that's nothing to sneeze at.
To fix it, we need laws that require a certain repairability score for all devices sold. Then doing the "right thing" would be a KPI that competes with pure financial incentives.
They make a high margin on each device and other manufacturers can manage it fine at similar price points. I believe it was deliberate, they back tracked after being highly criticised for it.
> To fix it, we need laws that require a certain repairability score for all devices sold. Then doing the "right thing" would be a KPI that competes with pure financial incentives.
If people are concerned about repairability they should seek out manufacturers that offer products where they have a good track record.
Laptops, tablets and phones are seen as partly consumable by the majority of people and they replace them every few years. I am not saying that it is right, I am just saying that is the reality. Also not every problem can be legislated away and if you make something a KPI it will be gamed.
So, how do you screw a thin piece of glass onto a phone that doesn’t have bevels to speak of in such a way that you can put it into your pocket for years, and push a finger on the center of the screen tens of thousands of times without breaking?
Also, if there’s room below the screen, the screen will bend more than when there isn’t, and that will affect longevity.
I’m not claiming using glue wasn’t done out of malice, just that we can’t say it is.
They also made a massive improvement by designing an adhesive for the battery that detaches with electricity. So you no longer have to use pull tabs or heat.
Having a non-user replaceable battery is a really easy way to ensure a product stops working after 3-4 years though.
And the criticism is typically directed at companies like Apple, who does make things that last physically, but then force you to upgrade by way of battery.