News for hackers. Stuff that matters.
Re:Nuclear fusion: it's time for a reality check by raverbashing on Wednesday January 29, 2025 @07:25AM (#42864099)
Yeah I agree

The hard part here is twofold: there are several orders of magnitude needed to be overcome (in efficiency) for it to work. Also the learning curve in fusion is not a curve, but more like a staircase with very tall steps

ITER is gearing up to be a great disappointment

I really don't feel like magnetic confinement is the way to go, unless we get some new superconducting technology and need to create electromagnets with 100x their current strength

Re:Nuclear fusion: it's time for a reality check by oneshtein on Wednesday January 29, 2025 @07:42AM (#42864217)
We see already, that Tokamak's will be very expensive to build and operate.
Re:Nuclear fusion: it's time for a reality check by amelius on Wednesday January 29, 2025 @07:39AM (#42864196)
> unless we get some new semiconductor technology

Did you mean superconductor technology?

Re:Nuclear fusion: it's time for a reality check by raverbashing on Wednesday January 29, 2025 @08:00AM (#42864406)
Yes, fixed
Re:Nuclear fusion: it's time for a reality check by DennisP on Wednesday January 29, 2025 @09:31AM (#42865285)
We actually do have commercially available superconductors that support much stronger magnetic fields than what ITER is able to do.

I don't think it's 100x, but it doesn't have to be. Tokamak output scales with the fourth power of magnetic field strength. Double the field, 16X the energy output. CFS and Tokamak Energy are building tokamaks with these.

Tokamak output also scales with the square of reactor size, which is why ITER is so big. These new reactors can be much smaller for the same output, so they'll be much faster and cheaper to build. The CFS design is about the size of JET, which was built in four years, with three of those being just for the building.

Re:Nuclear fusion: it's time for a reality check by UltraSane on Wednesday January 29, 2025 @10:32AM (#42866114)
Why doesn't ITER use the better superconductors?
Re:Nuclear fusion: it's time for a reality check by DennisP on Wednesday January 29, 2025 @10:45AM (#42866358)
Because they completed the initial design in 2001, and broke ground in 2007. The superconductors became available in the early 2010s.
Re:Nuclear fusion: it's time for a reality check by UltraSane on Wednesday January 29, 2025 @01:47PM (#42869322)
They should have redesigned it. Spending so much money on a fundamentally inferior design is pretty stupid.
Re:Nuclear fusion: it's time for a reality check by rcxdude on Thursday January 30, 2025 @04:18AM (#42876253)
That's a good way to never actually complete a big project.
Re:Nuclear fusion: it's time for a reality check by UltraSane on Thursday January 30, 2025 @08:10AM (#42877390)
It is already incredibly far behind schedule.
Re:Nuclear fusion: it's time for a reality check by rcxdude on Friday January 31, 2025 @06:46AM (#42886752)
And your suggestion would put it even further behind.
Re:Nuclear fusion: it's time for a reality check by pfdietz on Wednesday January 29, 2025 @11:37AM (#42867275)
It can't be 100x. In designs like ARC the magnets are up against limits not from the superconductors, but from the structures needed to resist JxB forces. The majority of the mass of the ARC reactor is in these steel structures. Much progress beyond that would involve significant increases in strength of materials, and even then the strength needed scales as B^2.

100x ARC would be ~2000 T. The magnetic pressure of such a field would be about 100x the detonation pressure of TNT. Experimentally, fields of such magnitude could only be produced very briefly in devices that near-instantly explode (for example, devices driven by intense laser pulses that produce large charge separations.)

> Tokamak output also scales with the square of reactor size

ITER is big because it wouldn't work at all if it were smaller (at the magnetic fields involved). Output scaling as (linear dimensions)^2 means you want your reactor to be as small as possible, to maximize power/volume. Square-cube law in operation. The higher magnetic field in HTSC tokamaks allows then to be smaller. Volumetric power density is still poor, though, just not as terrible as ITER.